From mboxrd@z Thu Jan 1 00:00:00 1970 From: adrian.hunter@nokia.com (Adrian Hunter) Date: Fri, 6 May 2011 12:14:10 +0300 Subject: [PATCH V2 11/16] mmc: omap_hsmmc: ensure pbias configuration is always done In-Reply-To: <1304673255-31634-1-git-send-email-adrian.hunter@nokia.com> References: <1304673255-31634-1-git-send-email-adrian.hunter@nokia.com> Message-ID: <1304673255-31634-12-git-send-email-adrian.hunter@nokia.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Go through the driver's set_power() functions rather than calling regulator_enable/disable() directly because otherwise pbias configuration for MMC1 is not done. Signed-off-by: Adrian Hunter --- drivers/mmc/host/omap_hsmmc.c | 17 ++++++++--------- 1 files changed, 8 insertions(+), 9 deletions(-) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 4f6e552..8aa9440 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -445,15 +445,14 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) * framework is fixed, we need a workaround like this * (which is safe for MMC, but not in general). */ - if (regulator_is_enabled(host->vcc) > 0) { - regulator_enable(host->vcc); - regulator_disable(host->vcc); - } - if (host->vcc_aux) { - if (regulator_is_enabled(reg) > 0) { - regulator_enable(reg); - regulator_disable(reg); - } + if (regulator_is_enabled(host->vcc) > 0 || + (host->vcc_aux && regulator_is_enabled(host->vcc_aux))) { + int vdd = ffs(mmc_slot(host).ocr_mask) - 1; + + mmc_slot(host).set_power(host->dev, host->slot_id, + 1, vdd); + mmc_slot(host).set_power(host->dev, host->slot_id, + 0, 0); } } -- 1.7.0.4