From mboxrd@z Thu Jan 1 00:00:00 1970 From: avinashhm@ti.com (Avinash.H.M) Date: Mon, 9 May 2011 17:59:40 +0530 Subject: [PATCH] OMAP3: set the core dpll clk rate in its set_rate function. Message-ID: <1304944180-20443-1-git-send-email-avinashhm@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The debug l3_ick/rate is not displaying the actual rate of the clock in hardware. This is because, the core dpll set_rate function doesn't update the clk.rate. After fixing, the l3_ick/rate is displaying proper values. Signed-off-by: Shweta Gulati Signed-off-by: Avinash.H.M Cc: Rajendra Nayak Cc: Paul Wamsley --- * The patch is based on v2.6.39-rc6 * The patch is tested on zoom3. * The patch is based on discussions from http://www.mail-archive.com/linux-omap at vger.kernel.org/msg48518.html arch/arm/mach-omap2/clkt34xx_dpll3m2.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c index b10d9ef..2a77faf 100644 --- a/arch/arm/mach-omap2/clkt34xx_dpll3m2.c +++ b/arch/arm/mach-omap2/clkt34xx_dpll3m2.c @@ -118,6 +118,7 @@ int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla, sdrc_cs0->actim_ctrlb, sdrc_cs0->mr, 0, 0, 0, 0); + clk->rate = rate; return 0; } -- 1.7.1