* Zaurus CF tests -- ok
@ 2011-04-15 21:18 Pavel Machek
2011-04-15 21:38 ` Cyril Hrubis
0 siblings, 1 reply; 7+ messages in thread
From: Pavel Machek @ 2011-04-15 21:18 UTC (permalink / raw)
To: linux-arm-kernel
Hi!
After getting _good_ power supply, I was able to untar and rm ltp tree
100 times so far. 2.6.38, ext3. (So metan no, I do not see any weird
ext3 problems).
Another strange thing is... I see lots of duplicated keystrokes --
like type "pavel" but machine understands "paavel". But it only seems
to happen when I'm _not_ trying to debug it?!
(
So... just because something needs 5V does not mean you should charge
it from USB.
Yes, I'm talking about zaurus. I noticed that it crashed rather
quickly when connected to USB power. (For example in tar/rm test).
So I took multimeter, and there was 4.15..4.5V on USB :-(.
With power from USB extension cable, it crashes in <5 minutes. It
seems to toggle charger a lot, as voltage on the cable is only
4.2..4.5V. I guess it is software problem in the charging code.
)
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
^ permalink raw reply [flat|nested] 7+ messages in thread
* Zaurus CF tests -- ok
2011-04-15 21:18 Zaurus CF tests -- ok Pavel Machek
@ 2011-04-15 21:38 ` Cyril Hrubis
2011-04-16 4:04 ` Marek Vasut
2011-04-16 7:41 ` Pavel Machek
0 siblings, 2 replies; 7+ messages in thread
From: Cyril Hrubis @ 2011-04-15 21:38 UTC (permalink / raw)
To: linux-arm-kernel
Hi!
> After getting _good_ power supply, I was able to untar and rm ltp tree
> 100 times so far. 2.6.38, ext3. (So metan no, I do not see any weird
> ext3 problems).
Hmm, I'm using original adapter, but who knows if it's okay to use...
> Another strange thing is... I see lots of duplicated keystrokes --
> like type "pavel" but machine understands "paavel". But it only seems
> to happen when I'm _not_ trying to debug it?!
That seems to be side effect of machine under load (it has gpio keyboard).
> (
> So... just because something needs 5V does not mean you should charge
> it from USB.
>
> Yes, I'm talking about zaurus. I noticed that it crashed rather
> quickly when connected to USB power. (For example in tar/rm test).
> So I took multimeter, and there was 4.15..4.5V on USB :-(.
>
> With power from USB extension cable, it crashes in <5 minutes. It
> seems to toggle charger a lot, as voltage on the cable is only
> 4.2..4.5V. I guess it is software problem in the charging code.
> )
The zaurus actually is AFAIK unable to run from battery when connected to the
external power, so weak power line may explain some of the strange behaviour.
--
metan
^ permalink raw reply [flat|nested] 7+ messages in thread
* Zaurus CF tests -- ok
2011-04-15 21:38 ` Cyril Hrubis
@ 2011-04-16 4:04 ` Marek Vasut
2011-04-16 7:41 ` Pavel Machek
1 sibling, 0 replies; 7+ messages in thread
From: Marek Vasut @ 2011-04-16 4:04 UTC (permalink / raw)
To: linux-arm-kernel
On Friday, April 15, 2011 11:38:17 PM Cyril Hrubis wrote:
> Hi!
>
> > After getting _good_ power supply, I was able to untar and rm ltp tree
> > 100 times so far. 2.6.38, ext3. (So metan no, I do not see any weird
> > ext3 problems).
>
> Hmm, I'm using original adapter, but who knows if it's okay to use...
I can lend you Eric's, but promise you won't break it or do anything weird to it
;-)
>
> > Another strange thing is... I see lots of duplicated keystrokes --
> > like type "pavel" but machine understands "paavel". But it only seems
> > to happen when I'm _not_ trying to debug it?!
>
> That seems to be side effect of machine under load (it has gpio keyboard).
Yea ... it's that polled para-keyboard I guess.
>
> > (
> > So... just because something needs 5V does not mean you should charge
> > it from USB.
> >
> > Yes, I'm talking about zaurus. I noticed that it crashed rather
> > quickly when connected to USB power. (For example in tar/rm test).
> > So I took multimeter, and there was 4.15..4.5V on USB :-(.
> >
> > With power from USB extension cable, it crashes in <5 minutes. It
> > seems to toggle charger a lot, as voltage on the cable is only
> > 4.2..4.5V. I guess it is software problem in the charging code.
> > )
>
> The zaurus actually is AFAIK unable to run from battery when connected to
> the external power, so weak power line may explain some of the strange
> behaviour.
As for the charging code, do we even have anything even remotely resembling that
?
^ permalink raw reply [flat|nested] 7+ messages in thread
* Zaurus CF tests -- ok
2011-04-15 21:38 ` Cyril Hrubis
2011-04-16 4:04 ` Marek Vasut
@ 2011-04-16 7:41 ` Pavel Machek
2011-05-15 12:26 ` Marek Vasut
1 sibling, 1 reply; 7+ messages in thread
From: Pavel Machek @ 2011-04-16 7:41 UTC (permalink / raw)
To: linux-arm-kernel
Hi!
> > After getting _good_ power supply, I was able to untar and rm ltp tree
> > 100 times so far. 2.6.38, ext3. (So metan no, I do not see any weird
> > ext3 problems).
>
> Hmm, I'm using original adapter, but who knows if it's okay to use...
It probably is...
> > Another strange thing is... I see lots of duplicated keystrokes --
> > like type "pavel" but machine understands "paavel". But it only seems
> > to happen when I'm _not_ trying to debug it?!
>
> That seems to be side effect of machine under load (it has gpio keyboard).
ouch. original corgi_kbd driver used timers, new one uses threads --
more affected by scheduling. I'm not even sure if the worker thread it
uses runs at elevated priority...
> > With power from USB extension cable, it crashes in <5 minutes. It
> > seems to toggle charger a lot, as voltage on the cable is only
> > 4.2..4.5V. I guess it is software problem in the charging code.
> > )
>
> The zaurus actually is AFAIK unable to run from battery when connected to the
> external power, so weak power line may explain some of the strange behaviour.
?? IIRC Stanislav told me that hardware will always run off whatever
is available...?
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
^ permalink raw reply [flat|nested] 7+ messages in thread
* Zaurus CF tests -- ok
2011-04-16 7:41 ` Pavel Machek
@ 2011-05-15 12:26 ` Marek Vasut
2011-05-15 14:31 ` Cyril Hrubis
0 siblings, 1 reply; 7+ messages in thread
From: Marek Vasut @ 2011-05-15 12:26 UTC (permalink / raw)
To: linux-arm-kernel
On Saturday, April 16, 2011 09:41:34 AM Pavel Machek wrote:
> Hi!
>
> > > After getting _good_ power supply, I was able to untar and rm ltp tree
> > > 100 times so far. 2.6.38, ext3. (So metan no, I do not see any weird
> > > ext3 problems).
> >
> > Hmm, I'm using original adapter, but who knows if it's okay to use...
>
> It probably is...
>
> > > Another strange thing is... I see lots of duplicated keystrokes --
> > > like type "pavel" but machine understands "paavel". But it only seems
> > > to happen when I'm _not_ trying to debug it?!
> >
> > That seems to be side effect of machine under load (it has gpio
> > keyboard).
>
> ouch. original corgi_kbd driver used timers, new one uses threads --
> more affected by scheduling. I'm not even sure if the worker thread it
> uses runs at elevated priority...
>
> > > With power from USB extension cable, it crashes in <5 minutes. It
> > > seems to toggle charger a lot, as voltage on the cable is only
> > > 4.2..4.5V. I guess it is software problem in the charging code.
> > > )
> >
> > The zaurus actually is AFAIK unable to run from battery when connected to
> > the external power, so weak power line may explain some of the strange
> > behaviour.
>
> ?? IIRC Stanislav told me that hardware will always run off whatever
> is available...?
> Pavel
Backtrace from QEMU ... I think this is what Cyril observed. But heck, it
happens in QEMU too ;-)
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 17 [#1] PREEMPT
last sysfs file:
CPU: 0 Not tainted (2.6.39-rc5+ #81)
PC is at complete+0x30/0x90
LR is at giveback+0x134/0x150
pc : [<c00eca34>] lr : [<c023c984>] psr: a0000193
sp : c782ff08 ip : c782fec8 fp : c782ff1c
r10: c02b78c4 r9 : c7828720 r8 : c880c000
r7 : c7865828 r6 : c7865894 r5 : c7865828 r4 : a0000113
r3 : c782e000 r2 : 00000102 r1 : f2e00000 r0 : 00000000
Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 00007977 Table: a5774000 DAC: 00000017
Process ksoftirqd/0 (pid: 3, stack limit = 0xc782e278)
Stack: (0xc782ff08 to 0xc7830000)
ff00: 60000113 c010497c c786f4d8 c786f4d8 00000000 c023c984
ff20: c786f4d8 c7868760 c7865878 c023cc28 c786f4d8 60000113 00000000 00000000
ff40: c02e2980 c02b7a3c 00000000 00000000 00000101 00000008 c02b78c4 c00f4bd8
ff60: c782e000 00000001 00000018 c02e2980 00000101 c00f5128 c7821660 c782e000
ff80: c782ffac 00000006 00000000 c782e000 c02e2980 00000000 00000001 00000000
ffa0: 00000000 00000000 00000000 c00f524c c7823f60 00000000 c782ffd4 c00f51bc
ffc0: 00000000 c0108d4c c00de570 00000000 00000000 00000000 c782ffd8 c782ffd8
ffe0: 00000000 c7823f60 c0108cc8 c00de570 00000013 c00de570 00000000 00000000
[<c00eca34>] (complete+0x30/0x90) from [<c023c984>] (giveback+0x134/0x150)
[<c023c984>] (giveback+0x134/0x150) from [<c023cc28>]
(pump_transfers+0x130/0x6f0)
[<c023cc28>] (pump_transfers+0x130/0x6f0) from [<c00f4bd8>]
(tasklet_action+0x84/0xdc)
[<c00f4bd8>] (tasklet_action+0x84/0xdc) from [<c00f5128>]
(__do_softirq+0x74/0x108)
[<c00f5128>] (__do_softirq+0x74/0x108) from [<c00f524c>]
(run_ksoftirqd+0x90/0x180)
[<c00f524c>] (run_ksoftirqd+0x90/0x180) from [<c0108d4c>] (kthread+0x84/0x8c)
[<c0108d4c>] (kthread+0x84/0x8c) from [<c00de570>] (kernel_thread_exit+0x0/0x8)
Code: e3c3303f e5932004 e2822001 e5832004 (e5903000)
---[ end trace 989a8f1146a65d49 ]---
Kernel panic - not syncing: Fatal exception in interrupt
[<c00e2200>] (unwind_backtrace+0x0/0xf0) from [<c024e13c>] (panic+0x70/0x198)
[<c024e13c>] (panic+0x70/0x198) from [<c00e0c1c>] (die+0x2c8/0x31c)
[<c00e0c1c>] (die+0x2c8/0x31c) from [<c00e3350>] (__do_kernel_fault+0x64/0x88)
[<c00e3350>] (__do_kernel_fault+0x64/0x88) from [<c00e3524>]
(do_page_fault+0x1b0/0x1c4)
[<c00e3524>] (do_page_fault+0x1b0/0x1c4) from [<c00d72cc>]
(do_DataAbort+0x34/0x94)
[<c00d72cc>] (do_DataAbort+0x34/0x94) from [<c00dd1ac>] (__dabt_svc+0x4c/0x60)
Exception stack(0xc782fec0 to 0xc782ff08)
fec0: 00000000 f2e00000 00000102 c782e000 a0000113 c7865828 c7865894 c7865828
fee0: c880c000 c7828720 c02b78c4 c782ff1c c782fec8 c782ff08 c023c984 c00eca34
ff00: a0000193 ffffffff
[<c00dd1ac>] (__dabt_svc+0x4c/0x60) from [<c00eca34>] (complete+0x30/0x90)
[<c00eca34>] (complete+0x30/0x90) from [<c023c984>] (giveback+0x134/0x150)
[<c023c984>] (giveback+0x134/0x150) from [<c023cc28>]
(pump_transfers+0x130/0x6f0)
[<c023cc28>] (pump_transfers+0x130/0x6f0) from [<c00f4bd8>]
(tasklet_action+0x84/0xdc)
[<c00f4bd8>] (tasklet_action+0x84/0xdc) from [<c00f5128>]
(__do_softirq+0x74/0x108)
[<c00f5128>] (__do_softirq+0x74/0x108) from [<c00f524c>]
(run_ksoftirqd+0x90/0x180)
[<c00f524c>] (run_ksoftirqd+0x90/0x180) from [<c0108d4c>] (kthread+0x84/0x8c)
[<c0108d4c>] (kthread+0x84/0x8c) from [<c00de570>] (kernel_thread_exit+0x0/0x8)
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2011-05-15 15:51 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-04-15 21:18 Zaurus CF tests -- ok Pavel Machek
2011-04-15 21:38 ` Cyril Hrubis
2011-04-16 4:04 ` Marek Vasut
2011-04-16 7:41 ` Pavel Machek
2011-05-15 12:26 ` Marek Vasut
2011-05-15 14:31 ` Cyril Hrubis
2011-05-15 15:51 ` Marek Vasut
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).