From: catalin.marinas@arm.com (Catalin Marinas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 14/18] ARM: LPAE: Add identity mapping support for the 3-level page table format
Date: Tue, 24 May 2011 22:39:20 +0100 [thread overview]
Message-ID: <1306273164-18217-15-git-send-email-catalin.marinas@arm.com> (raw)
In-Reply-To: <1306273164-18217-1-git-send-email-catalin.marinas@arm.com>
With LPAE, the pgd is a separate page table with entries pointing to the
pmd. The identity_mapping_add() function needs to ensure that the pgd is
populated before populating the pmd level. The do..while blocks now loop
over the pmd in order to have the same implementation for the two page
table formats. The pmd_addr_end() definition has been removed and the
generic one used instead. The pmd clean-up is done in the pgd_free()
function.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm/include/asm/pgtable.h | 4 ----
arch/arm/mm/idmap.c | 36 ++++++++++++++++++++++++++++++++++--
2 files changed, 34 insertions(+), 6 deletions(-)
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 1db9ad6..9645e52 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -263,10 +263,6 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
-/* we don't need complex calculations here as the pmd is folded into the pgd */
-#define pmd_addr_end(addr,end) (end)
-
-
#ifndef CONFIG_HIGHPTE
#define __pte_map(pmd) pmd_page_vaddr(*(pmd))
#define __pte_unmap(pte) do { } while (0)
diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c
index 2be9139..24e0655 100644
--- a/arch/arm/mm/idmap.c
+++ b/arch/arm/mm/idmap.c
@@ -1,9 +1,36 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <asm/cputype.h>
#include <asm/pgalloc.h>
#include <asm/pgtable.h>
+#ifdef CONFIG_ARM_LPAE
+static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
+ unsigned long prot)
+{
+ pmd_t *pmd;
+ unsigned long next;
+
+ if (pud_none_or_clear_bad(pud) || (pud_val(*pud) & L_PGD_SWAPPER)) {
+ pmd = pmd_alloc_one(NULL, addr);
+ if (!pmd) {
+ pr_warning("Failed to allocate identity pmd.\n");
+ return;
+ }
+ pud_populate(NULL, pud, pmd);
+ pmd += pmd_index(addr);
+ } else
+ pmd = pmd_offset(pud, addr);
+
+ do {
+ next = pmd_addr_end(addr, end);
+ *pmd = __pmd((addr & PMD_MASK) | prot);
+ flush_pmd_entry(pmd);
+ } while (pmd++, addr = next, addr != end);
+}
+#else /* !CONFIG_ARM_LPAE */
static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
unsigned long prot)
{
@@ -15,6 +42,7 @@ static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
pmd[1] = __pmd(addr);
flush_pmd_entry(pmd);
}
+#endif /* CONFIG_ARM_LPAE */
static void idmap_add_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
unsigned long prot)
@@ -32,7 +60,7 @@ void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end)
{
unsigned long prot, next;
- prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE;
+ prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AF;
if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
prot |= PMD_BIT4;
@@ -46,7 +74,11 @@ void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end)
#ifdef CONFIG_SMP
static void idmap_del_pmd(pud_t *pud, unsigned long addr, unsigned long end)
{
- pmd_t *pmd = pmd_offset(pud, addr);
+ pmd_t *pmd;
+
+ if (pud_none_or_clear_bad(pud))
+ return;
+ pmd = pmd_offset(pud, addr);
pmd_clear(pmd);
}
next prev parent reply other threads:[~2011-05-24 21:39 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-24 21:39 [PATCH v6 00/18] ARM: Add support for the Large Physical Address Extensions Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 01/18] ARM: LPAE: Use long long printk format for displaying the pud Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 02/18] ARM: LPAE: add ISBs around MMU enabling code Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 03/18] ARM: LPAE: Use unsigned long for __phys_to_virt and __virt_to_phys Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 04/18] ARM: LPAE: Use PMD_(SHIFT|SIZE|MASK) instead of PGDIR_* Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 05/18] ARM: LPAE: Factor out 2-level page table definitions into separate files Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 06/18] ARM: LPAE: Add (pte|pmd|pgd|pgprot)val_t type definitions as u32 Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 07/18] ARM: LPAE: Use a mask for physical addresses in page table entries Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 08/18] ARM: LPAE: Introduce the 3-level page table format definitions Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 09/18] ARM: LPAE: Page table maintenance for the 3-level format Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 10/18] ARM: LPAE: MMU setup for the 3-level page table format Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 11/18] ARM: LPAE: Invalidate the TLB before freeing the PMD Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 12/18] ARM: LPAE: Add fault handling support Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 13/18] ARM: LPAE: Add context switching support Catalin Marinas
2011-05-24 21:39 ` Catalin Marinas [this message]
2011-05-24 21:39 ` [PATCH v6 15/18] ARM: LPAE: Use generic dma_addr_t type definition Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 16/18] ARM: LPAE: mark memory banks with start > ULONG_MAX as highmem Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 17/18] ARM: LPAE: add support for ATAG_MEM64 Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 18/18] ARM: LPAE: Add the Kconfig entries Catalin Marinas
2011-05-24 23:56 ` [PATCH v6 00/18] ARM: Add support for the Large Physical Address Extensions David Brown
2011-05-25 0:44 ` Nicolas Pitre
2011-05-25 11:10 ` Arnd Bergmann
2011-05-25 11:22 ` Catalin Marinas
2011-05-25 12:43 ` Catalin Marinas
2011-05-25 8:33 ` Catalin Marinas
2011-07-01 16:24 ` Catalin Marinas
2011-07-02 12:19 ` Russell King - ARM Linux
2011-07-04 17:23 ` Catalin Marinas
2011-07-08 19:21 ` Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1306273164-18217-15-git-send-email-catalin.marinas@arm.com \
--to=catalin.marinas@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).