From: catalin.marinas@arm.com (Catalin Marinas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 07/18] ARM: LPAE: Use a mask for physical addresses in page table entries
Date: Tue, 24 May 2011 22:39:13 +0100 [thread overview]
Message-ID: <1306273164-18217-8-git-send-email-catalin.marinas@arm.com> (raw)
In-Reply-To: <1306273164-18217-1-git-send-email-catalin.marinas@arm.com>
With LPAE, the physical address mask is 40-bit while the page table
entry is 64-bit. This patch introduces PHYS_MASK for the 2-level page
table format, defined as ~0UL.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm/include/asm/pgtable-2level-hwdef.h | 2 ++
arch/arm/include/asm/pgtable.h | 6 +++---
2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm/include/asm/pgtable-2level-hwdef.h b/arch/arm/include/asm/pgtable-2level-hwdef.h
index 2b52c40..5cfba15 100644
--- a/arch/arm/include/asm/pgtable-2level-hwdef.h
+++ b/arch/arm/include/asm/pgtable-2level-hwdef.h
@@ -88,4 +88,6 @@
#define PTE_SMALL_AP_URO_SRW (_AT(pteval_t, 0xaa) << 4)
#define PTE_SMALL_AP_URW_SRW (_AT(pteval_t, 0xff) << 4)
+#define PHYS_MASK (~0UL)
+
#endif
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 9618052..8f9e1dd 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -199,10 +199,10 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
static inline pte_t *pmd_page_vaddr(pmd_t pmd)
{
- return __va(pmd_val(pmd) & PAGE_MASK);
+ return __va(pmd_val(pmd) & PHYS_MASK & (s32)PAGE_MASK);
}
-#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
+#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
/* we don't need complex calculations here as the pmd is folded into the pgd */
#define pmd_addr_end(addr,end) (end)
@@ -223,7 +223,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
#define pte_offset_map(pmd,addr) (__pte_map(pmd) + pte_index(addr))
#define pte_unmap(pte) __pte_unmap(pte)
-#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT)
+#define pte_pfn(pte) ((pte_val(pte) & PHYS_MASK) >> PAGE_SHIFT)
#define pfn_pte(pfn,prot) __pte(__pfn_to_phys(pfn) | pgprot_val(prot))
#define pte_page(pte) pfn_to_page(pte_pfn(pte))
next prev parent reply other threads:[~2011-05-24 21:39 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-24 21:39 [PATCH v6 00/18] ARM: Add support for the Large Physical Address Extensions Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 01/18] ARM: LPAE: Use long long printk format for displaying the pud Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 02/18] ARM: LPAE: add ISBs around MMU enabling code Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 03/18] ARM: LPAE: Use unsigned long for __phys_to_virt and __virt_to_phys Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 04/18] ARM: LPAE: Use PMD_(SHIFT|SIZE|MASK) instead of PGDIR_* Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 05/18] ARM: LPAE: Factor out 2-level page table definitions into separate files Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 06/18] ARM: LPAE: Add (pte|pmd|pgd|pgprot)val_t type definitions as u32 Catalin Marinas
2011-05-24 21:39 ` Catalin Marinas [this message]
2011-05-24 21:39 ` [PATCH v6 08/18] ARM: LPAE: Introduce the 3-level page table format definitions Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 09/18] ARM: LPAE: Page table maintenance for the 3-level format Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 10/18] ARM: LPAE: MMU setup for the 3-level page table format Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 11/18] ARM: LPAE: Invalidate the TLB before freeing the PMD Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 12/18] ARM: LPAE: Add fault handling support Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 13/18] ARM: LPAE: Add context switching support Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 14/18] ARM: LPAE: Add identity mapping support for the 3-level page table format Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 15/18] ARM: LPAE: Use generic dma_addr_t type definition Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 16/18] ARM: LPAE: mark memory banks with start > ULONG_MAX as highmem Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 17/18] ARM: LPAE: add support for ATAG_MEM64 Catalin Marinas
2011-05-24 21:39 ` [PATCH v6 18/18] ARM: LPAE: Add the Kconfig entries Catalin Marinas
2011-05-24 23:56 ` [PATCH v6 00/18] ARM: Add support for the Large Physical Address Extensions David Brown
2011-05-25 0:44 ` Nicolas Pitre
2011-05-25 11:10 ` Arnd Bergmann
2011-05-25 11:22 ` Catalin Marinas
2011-05-25 12:43 ` Catalin Marinas
2011-05-25 8:33 ` Catalin Marinas
2011-07-01 16:24 ` Catalin Marinas
2011-07-02 12:19 ` Russell King - ARM Linux
2011-07-04 17:23 ` Catalin Marinas
2011-07-08 19:21 ` Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1306273164-18217-8-git-send-email-catalin.marinas@arm.com \
--to=catalin.marinas@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).