From mboxrd@z Thu Jan 1 00:00:00 1970 From: fabio.estevam@freescale.com (Fabio Estevam) Date: Mon, 30 May 2011 12:42:26 -0300 Subject: [PATCH v3] ARM: mx5/mx53_evk: Add support for LED Message-ID: <1306770146-20870-1-git-send-email-fabio.estevam@freescale.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Signed-off-by: Fabio Estevam --- Changes since v2: - Use the new gpio helper function to register gpio_led arch/arm/mach-mx5/Kconfig | 1 + arch/arm/mach-mx5/board-mx53_evk.c | 17 +++++++++++++++++ 2 files changed, 18 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 7976512..3c98455 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -180,6 +180,7 @@ config MACH_MX53_EVK select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX + select LEDS_GPIO_REGISTER help Include support for MX53 EVK platform. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index f87d571..787cde8 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -35,6 +35,7 @@ #define MX53_EVK_FEC_PHY_RST IMX_GPIO_NR(7, 6) #define EVK_ECSPI1_CS0 IMX_GPIO_NR(2, 30) #define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19) +#define MX53EVK_LED IMX_GPIO_NR(7, 7) #include "crm_regs.h" #include "devices-imx53.h" @@ -58,12 +59,27 @@ static iomux_v3_cfg_t mx53_evk_pads[] = { /* ecspi chip select lines */ MX53_PAD_EIM_EB2__GPIO2_30, MX53_PAD_EIM_D19__GPIO3_19, + /* LED */ + MX53_PAD_PATA_DA_1__GPIO7_7, }; static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; +static const struct gpio_led mx53evk_leds[] __initconst = { + { + .name = "green", + .default_trigger = "heartbeat", + .gpio = MX53EVK_LED, + }, +}; + +static const struct gpio_led_platform_data mx53evk_leds_data __initconst = { + .leds = mx53evk_leds, + .num_leds = ARRAY_SIZE(mx53evk_leds), +}; + static inline void mx53_evk_init_uart(void) { imx53_add_imx_uart(0, NULL); @@ -133,6 +149,7 @@ static void __init mx53_evk_board_init(void) ARRAY_SIZE(mx53_evk_spi_board_info)); imx53_add_ecspi(0, &mx53_evk_spi_data); imx53_add_imx2_wdt(0, NULL); + gpio_led_register_device(-1, &mx53evk_leds_data); } static void __init mx53_evk_timer_init(void) -- 1.6.0.4