From: robherring2@gmail.com (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] ARM: gic: add OF based initialization
Date: Wed, 1 Jun 2011 11:37:49 -0500 [thread overview]
Message-ID: <1306946270-18379-3-git-send-email-robherring2@gmail.com> (raw)
In-Reply-To: <1306946270-18379-1-git-send-email-robherring2@gmail.com>
From: Rob Herring <rob.herring@calxeda.com>
This adds gic initialization using device tree data. An example device tree
binding looks like this:
intc: interrupt-controller at fff11000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <1>;
interrupt-controller;
reg = <0xfff11000 0x1000>,
<0xfff10100 0x100>;
irq-start = <29>;
};
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
---
arch/arm/common/gic.c | 35 +++++++++++++++++++++++++++++++++++
arch/arm/include/asm/hardware/gic.h | 1 +
2 files changed, 36 insertions(+), 0 deletions(-)
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 4ddd0a6..d44ca5b 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -28,6 +28,8 @@
#include <linux/smp.h>
#include <linux/cpumask.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
@@ -401,3 +403,36 @@ void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
writel_relaxed(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
}
#endif
+
+#ifdef CONFIG_OF
+static struct of_device_id gic_ids[] __initdata = {
+ { .compatible = "arm,cortex-a9-gic" },
+};
+
+void __init gic_of_init(void)
+{
+ struct device_node *np;
+ void __iomem *cpu_base;
+ void __iomem *dist_base;
+ __u32 irq_start = 16;
+ const __be32 *val;
+
+ np = of_find_matching_node(NULL, gic_ids);
+ if (!np)
+ panic("unable to find compatible gic node in dtb\n");
+
+ dist_base = of_iomap(np, 0);
+ if (!dist_base)
+ panic("unable to map gic dist registers\n");
+
+ cpu_base = of_iomap(np, 1);
+ if (!cpu_base)
+ panic("unable to map gic cpu registers\n");
+
+ if ((val = of_get_property(np, "irq-start", NULL)) != NULL)
+ irq_start = of_read_ulong(val, 1);
+ of_node_put(np);
+
+ gic_init(0, irq_start, dist_base, cpu_base);
+}
+#endif
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 0691f9d..954a08e 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -37,6 +37,7 @@ extern void __iomem *gic_cpu_base_addr;
extern struct irq_chip gic_arch_extn;
void gic_init(unsigned int, unsigned int, void __iomem *, void __iomem *);
+void gic_of_init(void);
void gic_secondary_init(unsigned int);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
--
1.7.4.1
next prev parent reply other threads:[~2011-06-01 16:37 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-01 16:37 [PATCH 0/3] DT bindings Cortex A9 peripherals Rob Herring
2011-06-01 16:37 ` [PATCH 1/3] ARM: pmu: add OF probing support Rob Herring
2011-06-01 18:37 ` Olof Johansson
2011-06-01 16:37 ` Rob Herring [this message]
2011-06-01 16:37 ` [PATCH 3/3] ARM: l2x0: Add OF based initialization Rob Herring
2011-06-01 18:40 ` Olof Johansson
2011-06-01 19:01 ` Rob Herring
-- strict thread matches above, loose matches on Subject: below --
2011-06-07 14:22 [PATCH v2 0/3] DT bindings for Cortex A9 peripherals Rob Herring
2011-06-07 14:22 ` [PATCH 2/3] ARM: gic: add OF based initialization Rob Herring
2011-06-13 16:53 ` Grant Likely
2011-06-13 21:39 ` Rob Herring
2011-06-13 22:14 ` Russell King - ARM Linux
2011-06-14 13:56 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1306946270-18379-3-git-send-email-robherring2@gmail.com \
--to=robherring2@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).