From: vinod.koul@intel.com (Koul, Vinod)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/5] ep93xx DMA patches
Date: Mon, 06 Jun 2011 12:09:40 +0530 [thread overview]
Message-ID: <1307342380.10976.79.camel@vkoul-udesk3> (raw)
In-Reply-To: <20110605081904.GA16018@acer>
On Sun, 2011-06-05 at 11:19 +0300, Mika Westerberg wrote:
> Vinod,
>
> As this series has acks for all the subsystem maintainers, would it be ok for
> you to take the entire series via your tree? Or do you have any idea how to
> get it merged?
Please don't top post :(
I have applied this series to next including the asoc and spi changes,
if anyone has any objections please let me know
>
> On Sun, May 29, 2011 at 01:10:01PM +0300, Mika Westerberg wrote:
> > This is an updated version of the ep93xx DMA patches. Previous version can be
> > found here: https://lkml.org/lkml/2011/5/22/86.
> >
> > Changes to v1:
> > * removed unnecessary header
> > * corrected SPI driver documentation
> > * DMA driver platform code is only compiled when CONFIG_EP93XX_DMA is
> > enabled
> >
> > I tried to put all the acks in place, hope I got them right.
> >
> > There is a dependency between patch 1 and patch 4 which I'm not entirely sure
> > how to solve. Basically it is required that we have patch 1 applied before
> > patch 4 or merge conflict results.
> >
> > Otherwise it shouldn't matter in which order the patches arrive to the
> > mainline.
> >
> > Unless someone has a better idea, I suggest that these patches will go through
> > their respective subsystem trees. All the maintainers should be copied.
> >
> > Thanks,
> > MW
> >
> > Mika Westerberg (5):
> > dmaengine: add ep93xx DMA support
> > ep93xx: add dmaengine platform code
> > ASoC: ep93xx: convert to use the DMA engine API
> > ep93xx: remove the old M2P DMA code
> > spi/ep93xx: add DMA support
> >
> > Documentation/spi/ep93xx_spi | 10 +
> > arch/arm/mach-ep93xx/Makefile | 4 +-
> > arch/arm/mach-ep93xx/core.c | 6 +-
> > arch/arm/mach-ep93xx/dma-m2p.c | 411 -------
> > arch/arm/mach-ep93xx/dma.c | 108 ++
> > arch/arm/mach-ep93xx/include/mach/dma.h | 190 ++---
> > arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h | 2 +
> > drivers/dma/Kconfig | 7 +
> > drivers/dma/Makefile | 1 +
> > drivers/dma/ep93xx_dma.c | 1355 ++++++++++++++++++++++++
> > drivers/spi/ep93xx_spi.c | 303 +++++-
> > sound/soc/ep93xx/ep93xx-ac97.c | 4 +-
> > sound/soc/ep93xx/ep93xx-i2s.c | 4 +-
> > sound/soc/ep93xx/ep93xx-pcm.c | 137 ++--
> > 14 files changed, 1930 insertions(+), 612 deletions(-)
> > delete mode 100644 arch/arm/mach-ep93xx/dma-m2p.c
> > create mode 100644 arch/arm/mach-ep93xx/dma.c
> > create mode 100644 drivers/dma/ep93xx_dma.c
> >
> > --
> > 1.7.4.4
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
~Vinod
next prev parent reply other threads:[~2011-06-06 6:39 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-29 10:10 [PATCH v2 0/5] ep93xx DMA patches Mika Westerberg
2011-05-29 10:10 ` [PATCH v2 1/5] dmaengine: add ep93xx DMA support Mika Westerberg
2011-11-15 15:02 ` Rafal Prylowski
2011-11-15 17:59 ` H Hartley Sweeten
2011-11-16 6:48 ` Mika Westerberg
2011-11-16 9:00 ` Rafal Prylowski
2011-11-16 6:55 ` Mika Westerberg
2011-11-16 8:31 ` Rafal Prylowski
2011-11-19 12:38 ` Mika Westerberg
2011-11-21 7:44 ` Rafal Prylowski
2011-11-21 8:01 ` Mika Westerberg
2011-11-21 8:32 ` Vinod Koul
2011-11-22 5:59 ` Mika Westerberg
2011-11-23 10:47 ` Vinod Koul
2011-11-21 8:54 ` Rafal Prylowski
2011-11-22 6:47 ` Mika Westerberg
2011-11-22 8:45 ` Rafal Prylowski
2011-05-29 10:10 ` [PATCH v2 2/5] ep93xx: add dmaengine platform code Mika Westerberg
2011-05-29 10:10 ` [PATCH v2 3/5] ASoC: ep93xx: convert to use the DMA engine API Mika Westerberg
2011-05-29 10:10 ` [PATCH v2 4/5] ep93xx: remove the old M2P DMA code Mika Westerberg
2011-05-29 10:10 ` [PATCH v2 5/5] spi/ep93xx: add DMA support Mika Westerberg
2011-06-03 20:44 ` Grant Likely
2011-06-07 17:14 ` Mika Westerberg
2011-06-07 18:45 ` Grant Likely
2011-06-07 19:06 ` Mika Westerberg
2011-06-07 19:18 ` Grant Likely
2011-06-07 19:29 ` Mika Westerberg
2011-06-07 19:40 ` Grant Likely
2011-06-08 3:58 ` Koul, Vinod
2011-06-08 21:53 ` Grant Likely
2011-06-09 16:42 ` Koul, Vinod
2011-06-09 18:46 ` Grant Likely
2011-06-09 19:15 ` Mika Westerberg
2011-06-05 8:19 ` [PATCH v2 0/5] ep93xx DMA patches Mika Westerberg
2011-06-06 6:39 ` Koul, Vinod [this message]
2011-06-06 16:42 ` Mika Westerberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1307342380.10976.79.camel@vkoul-udesk3 \
--to=vinod.koul@intel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox