linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/5] DRM: Add support for the sii902x HDMI/DVI encoder
Date: Tue,  7 Jun 2011 12:45:49 +0200	[thread overview]
Message-ID: <1307443550-25549-5-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1307443550-25549-1-git-send-email-s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/gpu/drm/Kconfig       |    6 +
 drivers/gpu/drm/i2c/Makefile  |    3 +
 drivers/gpu/drm/i2c/sii902x.c |  334 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 343 insertions(+), 0 deletions(-)
 create mode 100644 drivers/gpu/drm/i2c/sii902x.c

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index bcd9a27..01d5444 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -166,6 +166,12 @@ config DRM_SAVAGE
 	  Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
 	  chipset. If M is selected the module will be called savage.
 
+config DRM_I2C_SII902X
+	tristate "sii902x"
+	depends on DRM && I2C
+	help
+	  Support for sii902x DVI/HDMI encoder chips
+
 config DRM_IMX_IPUV3
 	tristate "i.MX IPUv3"
 	depends on DRM && ARCH_MXC
diff --git a/drivers/gpu/drm/i2c/Makefile b/drivers/gpu/drm/i2c/Makefile
index 9286256..a7a8d40 100644
--- a/drivers/gpu/drm/i2c/Makefile
+++ b/drivers/gpu/drm/i2c/Makefile
@@ -5,3 +5,6 @@ obj-$(CONFIG_DRM_I2C_CH7006) += ch7006.o
 
 sil164-y := sil164_drv.o
 obj-$(CONFIG_DRM_I2C_SIL164) += sil164.o
+
+sii902x := sii902x_drv.o
+obj-$(CONFIG_DRM_I2C_SII902X) += sii902x.o
diff --git a/drivers/gpu/drm/i2c/sii902x.c b/drivers/gpu/drm/i2c/sii902x.c
new file mode 100644
index 0000000..7928533
--- /dev/null
+++ b/drivers/gpu/drm/i2c/sii902x.c
@@ -0,0 +1,334 @@
+/*
+ * Copyright (C) 2010 Francisco Jerez.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial
+ * portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
+ * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+ * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_encoder_slave.h>
+#include <drm/drm_encon.h>
+
+struct sii902x_encoder_params {
+};
+
+struct sii902x_priv {
+	struct sii902x_encoder_params config;
+	struct i2c_client *client;
+	struct drm_encoder_connector encon;
+};
+
+#define to_sii902x(x) container_of(x, struct sii902x_priv, encon)
+
+static int sii902x_write(struct i2c_client *client, uint8_t addr, uint8_t val)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, addr, val);
+	if (ret) {
+		dev_dbg(&client->dev, "%s failed with %d\n", __func__, ret);
+	}
+	return ret;
+}
+
+static uint8_t sii902x_read(struct i2c_client *client, uint8_t addr)
+{
+	int dat;
+
+	dat = i2c_smbus_read_byte_data(client, addr);
+
+	return dat;	
+}
+
+static int hdmi_cap = 0; /* FIXME */
+
+static void sii902x_poweron(struct sii902x_priv *priv)
+{
+	struct i2c_client *client = priv->client;
+
+	/* Turn on DVI or HDMI */
+	if (hdmi_cap)
+		sii902x_write(client, 0x1A, 0x01 | 4);
+	else
+		sii902x_write(client, 0x1A, 0x00);
+
+	return;
+}
+
+static void sii902x_poweroff(struct sii902x_priv *priv)
+{
+	struct i2c_client *client = priv->client;
+	
+	/* disable tmds before changing resolution */
+	if (hdmi_cap)
+		sii902x_write(client, 0x1A, 0x11);
+	else
+		sii902x_write(client, 0x1A, 0x10);
+
+	return;
+}
+
+static int sii902x_get_modes(struct drm_encoder_connector *encon)
+{
+	struct sii902x_priv *priv = to_sii902x(encon);
+	struct i2c_client *client = priv->client;
+	struct i2c_adapter *adap = client->adapter;
+	struct drm_connector *connector = &encon->connector;
+	struct edid *edid;
+	int ret;
+	int old, dat, cnt = 100;
+
+	old = sii902x_read(client, 0x1A);
+
+	sii902x_write(client, 0x1A, old | 0x4);
+	do {
+		cnt--;
+		msleep(10);
+		dat = sii902x_read(client, 0x1A);
+	} while ((!(dat & 0x2)) && cnt);
+
+	if (!cnt)
+		return -ETIMEDOUT;
+
+	sii902x_write(client, 0x1A, old | 0x06);
+
+	edid = drm_get_edid(connector, adap);
+	if (edid) {
+		drm_mode_connector_update_edid_property(connector, edid);
+		ret = drm_add_edid_modes(connector, edid);
+		connector->display_info.raw_edid = NULL;
+		kfree(edid);
+	}
+
+	cnt = 100;
+	do {
+		cnt--;
+		sii902x_write(client, 0x1A, old & ~0x6);
+		msleep(10);
+		dat = sii902x_read(client, 0x1A);
+	} while ((dat & 0x6) && cnt);
+
+	if (!cnt)
+		ret = -1;
+
+	sii902x_write(client, 0x1A, old);
+
+	return 0;
+}
+
+static irqreturn_t sii902x_detect_handler(int irq, void *data)
+{
+	struct sii902x_priv *priv = data;
+	struct i2c_client *client = priv->client;
+	int dat;
+
+	dat = sii902x_read(client, 0x3D);
+	if (dat & 0x1) {
+		/* cable connection changes */
+		if (dat & 0x4) {
+			printk("plugin\n");
+		} else {
+			printk("plugout\n");
+		}
+	}
+	sii902x_write(client, 0x3D, dat);
+
+	return IRQ_HANDLED;
+}
+
+
+static int sii902x_mode_valid(struct drm_encoder_connector *encon,
+			  struct drm_display_mode *mode)
+{
+	return MODE_OK;
+}
+
+static void sii902x_mode_set(struct drm_encoder_connector *encon,
+			 struct drm_display_mode *mode,
+			 struct drm_display_mode *adjusted_mode)
+{
+	struct sii902x_priv *priv = to_sii902x(encon);
+	struct i2c_client *client = priv->client;
+	u16 data[4];
+	u32 refresh;
+	u8 *tmp;
+	int i;
+
+	/* Power up */
+	sii902x_write(client, 0x1E, 0x00);
+
+	dev_dbg(&client->dev, "%s: %dx%d, pixclk %d\n", __func__,
+			mode->hdisplay, mode->vdisplay,
+			mode->clock * 1000);
+
+	/* set TPI video mode */
+	data[0] = mode->clock / 10;
+	data[2] = mode->htotal;
+	data[3] = mode->vtotal;
+	refresh = data[2] * data[3];
+	refresh = (mode->clock * 1000) / refresh;
+	data[1] = refresh * 100;
+	tmp = (u8 *)data;
+	for (i = 0; i < 8; i++)
+		sii902x_write(client, i, tmp[i]);
+
+	/* input bus/pixel: full pixel wide (24bit), rising edge */
+	sii902x_write(client, 0x08, 0x70);
+	/* Set input format to RGB */
+	sii902x_write(client, 0x09, 0x00);
+	/* set output format to RGB */
+	sii902x_write(client, 0x0A, 0x00);
+	/* audio setup */
+	sii902x_write(client, 0x25, 0x00);
+	sii902x_write(client, 0x26, 0x40);
+	sii902x_write(client, 0x27, 0x00);
+}
+
+static void sii902x_dpms(struct drm_encoder_connector *encon, int mode)
+{
+	struct sii902x_priv *priv = to_sii902x(encon);
+
+	if (mode)
+		sii902x_poweroff(priv);
+	else
+		sii902x_poweron(priv);
+}
+
+static void sii902x_prepare(struct drm_encoder_connector *encon)
+{
+	struct sii902x_priv *priv = to_sii902x(encon);
+
+	sii902x_poweroff(priv);
+}
+
+static void sii902x_commit(struct drm_encoder_connector *encon)
+{
+	struct sii902x_priv *priv = to_sii902x(encon);
+
+	sii902x_poweron(priv);
+}
+
+struct drm_encoder_connector_funcs sii902x_funcs = {
+	.dpms = sii902x_dpms,
+	.prepare = sii902x_prepare,
+	.commit = sii902x_commit,
+	.get_modes = sii902x_get_modes,
+	.mode_valid = sii902x_mode_valid,
+	.mode_set = sii902x_mode_set,
+};
+
+/* I2C driver functions */
+
+static int
+sii902x_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	int dat, ret;
+	struct sii902x_priv *priv;
+	const char *drm_name = "imx-drm.0"; /* FIXME: pass from pdata */
+	int encon_id = 0; /* FIXME: pass from pdata */
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->client = client;
+
+	/* Set 902x in hardware TPI mode on and jump out of D3 state */
+	if (sii902x_write(client, 0xc7, 0x00) < 0) {
+		dev_err(&client->dev, "SII902x: cound not find device\n");
+		return -ENODEV;
+	}
+
+	/* read device ID */
+	dat = sii902x_read(client, 0x1b);
+	if (dat != 0xb0) {
+		dev_err(&client->dev, "not found. id is 0x%02x instead of 0xb0\n",
+				dat);
+		return -ENODEV;
+	}
+
+	if (client->irq) {
+		ret = request_threaded_irq(client->irq, NULL, sii902x_detect_handler,
+				IRQF_TRIGGER_FALLING,
+				"SII902x_det", priv);
+		sii902x_write(client, 0x3c, 0x01);
+	}
+
+	priv->encon.funcs = &sii902x_funcs;
+
+	i2c_set_clientdata(client, priv);
+
+	drm_encon_register(drm_name, encon_id, &priv->encon);
+
+	dev_info(&client->dev, "initialized\n");
+
+	return 0;
+}
+
+static int sii902x_remove(struct i2c_client *client)
+{
+	struct sii902x_priv *priv;
+	int ret;
+
+	priv = i2c_get_clientdata(client);
+
+	ret = drm_encon_unregister(&priv->encon);
+	if (ret)
+		return ret;
+
+	kfree(priv);
+
+	return 0;
+}
+
+static struct i2c_device_id sii902x_ids[] = {
+	{ "sii9022", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, sii902x_ids);
+
+static struct i2c_driver sii902x_i2c_driver = {
+	.probe = sii902x_probe,
+	.remove = sii902x_remove,
+	.driver = {
+		.name = "sii902x",
+	},
+	.id_table = sii902x_ids,
+};
+
+static int __init sii902x_init(void)
+{
+	return i2c_add_driver(&sii902x_i2c_driver);
+}
+
+static void __exit sii902x_exit(void)
+{
+	i2c_del_driver(&sii902x_i2c_driver);
+}
+
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_DESCRIPTION("Silicon Image sii902x HDMI transmitter driver");
+MODULE_LICENSE("GPL");
+
+module_init(sii902x_init);
+module_exit(sii902x_exit);
-- 
1.7.5.3

  parent reply	other threads:[~2011-06-07 10:45 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-07 10:45 [RFC PATCH] KMS support for i.MX51/53 Sascha Hauer
2011-06-07 10:45 ` [PATCH 1/5] DRM: add i.MX IPUv3 base driver Sascha Hauer
2011-06-07 15:45   ` Fabio Estevam
2011-06-07 10:45 ` [PATCH 2/5] DRM i.MX IPU: Add support for IPU submodules Sascha Hauer
2011-06-07 10:45 ` [PATCH 3/5] DRM: Add drm encoder/connector helper Sascha Hauer
2011-06-07 10:45 ` Sascha Hauer [this message]
2011-07-08 20:42   ` [PATCH 4/5] DRM: Add support for the sii902x HDMI/DVI encoder Alex Deucher
2011-07-08 21:01   ` Michał Mirosław
2011-07-12 13:21     ` Sascha Hauer
2011-06-07 10:45 ` [PATCH 5/5] DRM: Add i.MX IPUv3 support Sascha Hauer
2011-06-07 11:17 ` [RFC PATCH] KMS support for i.MX51/53 Alan Cox
2011-06-07 19:12   ` Sascha Hauer
2011-06-07 19:59     ` Alan Cox
2011-06-08  8:54       ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1307443550-25549-5-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).