linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: ccross@android.com (Colin Cross)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] ARM: vfp: Use cpu pm notifiers to save vfp state
Date: Sun, 12 Jun 2011 17:43:45 -0700	[thread overview]
Message-ID: <1307925825-28566-4-git-send-email-ccross@android.com> (raw)
In-Reply-To: <1307925825-28566-1-git-send-email-ccross@android.com>

When the cpu is powered down in a low power mode, the vfp
registers may be reset.

This patch uses CPU_PM_ENTER and CPU_PM_EXIT notifiers to save
and restore the cpu's vfp registers.

Signed-off-by: Colin Cross <ccross@android.com>
---
 arch/arm/vfp/vfpmodule.c |   40 ++++++++++++++++++++++++++++++++++++++++
 1 files changed, 40 insertions(+), 0 deletions(-)

diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index f25e7ec..6f08dbe 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -21,6 +21,7 @@
 #include <asm/cputype.h>
 #include <asm/thread_notify.h>
 #include <asm/vfp.h>
+#include <asm/cpu_pm.h>
 
 #include "vfpinstr.h"
 #include "vfp.h"
@@ -169,6 +170,44 @@ static struct notifier_block vfp_notifier_block = {
 	.notifier_call	= vfp_notifier,
 };
 
+#ifdef CONFIG_CPU_PM
+static int vfp_cpu_pm_notifier(struct notifier_block *self, unsigned long cmd,
+	void *v)
+{
+	u32 fpexc = fmrx(FPEXC);
+	unsigned int cpu = smp_processor_id();
+
+	switch (cmd) {
+	case CPU_PM_ENTER:
+		if (last_VFP_context[cpu]) {
+			fmxr(FPEXC, fpexc | FPEXC_EN);
+			vfp_save_state(last_VFP_context[cpu], fpexc);
+			/* force a reload when coming back from idle */
+			last_VFP_context[cpu] = NULL;
+			fmxr(FPEXC, fpexc & ~FPEXC_EN);
+		}
+		break;
+	case CPU_PM_ENTER_FAILED:
+	case CPU_PM_EXIT:
+		/* make sure VFP is disabled when leaving idle */
+		fmxr(FPEXC, fpexc & ~FPEXC_EN);
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block vfp_cpu_pm_notifier_block = {
+	.notifier_call = vfp_cpu_pm_notifier,
+};
+
+static void vfp_cpu_pm_init(void)
+{
+	cpu_pm_register_notifier(&vfp_cpu_pm_notifier_block);
+}
+#else
+static inline void vfp_cpu_pm_init(void) { }
+#endif
+
 /*
  * Raise a SIGFPE for the current process.
  * sicode describes the signal being raised.
@@ -563,6 +602,7 @@ static int __init vfp_init(void)
 		vfp_vector = vfp_support_entry;
 
 		thread_register_notifier(&vfp_notifier_block);
+		vfp_cpu_pm_init();
 		vfp_pm_init();
 
 		/*
-- 
1.7.4.1

  parent reply	other threads:[~2011-06-13  0:43 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-13  0:43 [PATCH 0/3] CPU PM notifiers Colin Cross
2011-06-13  0:43 ` [PATCH 1/3] ARM: Add cpu power management notifiers Colin Cross
2011-06-13  1:57   ` Rob Herring
2011-06-13 22:17   ` Kevin Hilman
2011-06-14  6:15     ` Colin Cross
2011-06-16  0:12       ` Kevin Hilman
2011-06-13  0:43 ` [PATCH 2/3] ARM: gic: Use cpu pm notifiers to save gic state Colin Cross
2011-06-13 10:41   ` Lorenzo Pieralisi
2011-06-13  0:43 ` Colin Cross [this message]
2011-06-13 18:37 ` [PATCH 0/3] CPU PM notifiers Rafael J. Wysocki
2011-06-13 18:55   ` Colin Cross
2011-06-14 21:00     ` Rafael J. Wysocki
2011-06-14 21:19       ` Colin Cross
2011-06-14 21:34         ` Rafael J. Wysocki
2011-06-14 21:40           ` Colin Cross
2011-06-14 22:12             ` Rafael J. Wysocki
2011-06-15  6:54               ` Santosh Shilimkar
2011-06-15 23:13               ` Rafael J. Wysocki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1307925825-28566-4-git-send-email-ccross@android.com \
    --to=ccross@android.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).