From mboxrd@z Thu Jan 1 00:00:00 1970 From: shawn.guo@linaro.org (Shawn Guo) Date: Wed, 15 Jun 2011 19:15:20 +0800 Subject: [PATCH v2 2/4] mmc: sdhci-esdhc-imx: SDHCI_CARD_PRESENT does not get cleared In-Reply-To: <1308136522-3403-1-git-send-email-shawn.guo@linaro.org> References: <1308136522-3403-1-git-send-email-shawn.guo@linaro.org> Message-ID: <1308136522-3403-3-git-send-email-shawn.guo@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The function esdhc_readl_le intends to clear bit SDHCI_CARD_PRESENT, when the card detect gpio tells there is no card. But it does not clear the bit actually. The patch gives a fix on that. Signed-off-by: Shawn Guo --- drivers/mmc/host/sdhci-esdhc-imx.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 248b8e5..94097c0 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -84,7 +84,7 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg) if (boarddata && gpio_is_valid(boarddata->cd_gpio) && gpio_get_value(boarddata->cd_gpio)) /* no card, if a valid gpio says so... */ - val &= SDHCI_CARD_PRESENT; + val &= ~SDHCI_CARD_PRESENT; else /* ... in all other cases assume card is present */ val |= SDHCI_CARD_PRESENT; -- 1.7.4.1