linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: kgene.kim@samsung.com (Kukjin Kim)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/7] ARM: EXYNOS4: Support system level power down configuration
Date: Wed, 22 Jun 2011 17:46:39 +0900	[thread overview]
Message-ID: <1308732405-16664-2-git-send-email-kgene.kim@samsung.com> (raw)
In-Reply-To: <1308732405-16664-1-git-send-email-kgene.kim@samsung.com>

From: Jaecheol Lee <jc.lee@samsung.com>

EXYNOS4 supports 3 different system level power down mode by PMU (Power
Management Unit). Each power down mode need to configure many PMU registers
with different value. This patch supports function to configure PMU registers
with pre-defined values in PMU code. This function may be used by PM code and
AFTR/LPA support driver.

Signed-off-by: Jaecheol Lee <jc.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos4/Makefile           |    2 +-
 arch/arm/mach-exynos4/include/mach/pmu.h |   27 +++++
 arch/arm/mach-exynos4/pmu.c              |  175 ++++++++++++++++++++++++++++++
 3 files changed, 203 insertions(+), 1 deletions(-)
 create mode 100644 arch/arm/mach-exynos4/include/mach/pmu.h
 create mode 100644 arch/arm/mach-exynos4/pmu.c

diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index 60fe5ec..880f902 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -13,7 +13,7 @@ obj-				:=
 # Core support for EXYNOS4 system
 
 obj-$(CONFIG_CPU_EXYNOS4210)	+= cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_EXYNOS4210)	+= setup-i2c0.o irq-eint.o dma.o
+obj-$(CONFIG_CPU_EXYNOS4210)	+= setup-i2c0.o irq-eint.o dma.o pmu.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o
 obj-$(CONFIG_CPU_FREQ)		+= cpufreq.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
diff --git a/arch/arm/mach-exynos4/include/mach/pmu.h b/arch/arm/mach-exynos4/include/mach/pmu.h
new file mode 100644
index 0000000..4f9c976
--- /dev/null
+++ b/arch/arm/mach-exynos4/include/mach/pmu.h
@@ -0,0 +1,27 @@
+/* linux/arch/arm/mach-exynos4/include/mach/pmu.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * EXYNOS4210 - PMU(Power Management Unit) support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_PMU_H
+#define __ASM_ARCH_PMU_H __FILE__
+
+enum sys_powerdown {
+	SYS_AFTR,
+	SYS_LPA,
+	SYS_SLEEP,
+	NUM_SYS_POWERDOWN,
+};
+
+extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode);
+extern int exynos4_enter_lp(unsigned long *saveblk, long);
+extern void exynos4_idle_resume(void);
+
+#endif /* __ASM_ARCH_PMU_H */
diff --git a/arch/arm/mach-exynos4/pmu.c b/arch/arm/mach-exynos4/pmu.c
new file mode 100644
index 0000000..7ea9eb2
--- /dev/null
+++ b/arch/arm/mach-exynos4/pmu.c
@@ -0,0 +1,175 @@
+/* linux/arch/arm/mach-exynos4/pmu.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * EXYNOS4210 - CPU PMU(Power Management Unit) support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#include <mach/regs-clock.h>
+#include <mach/pmu.h>
+
+static void __iomem *sys_powerdown_reg[] = {
+	S5P_ARM_CORE0_LOWPWR,
+	S5P_DIS_IRQ_CORE0,
+	S5P_DIS_IRQ_CENTRAL0,
+	S5P_ARM_CORE1_LOWPWR,
+	S5P_DIS_IRQ_CORE1,
+	S5P_DIS_IRQ_CENTRAL1,
+	S5P_ARM_COMMON_LOWPWR,
+	S5P_L2_0_LOWPWR,
+	S5P_L2_1_LOWPWR,
+	S5P_CMU_ACLKSTOP_LOWPWR,
+	S5P_CMU_SCLKSTOP_LOWPWR,
+	S5P_CMU_RESET_LOWPWR,
+	S5P_APLL_SYSCLK_LOWPWR,
+	S5P_MPLL_SYSCLK_LOWPWR,
+	S5P_VPLL_SYSCLK_LOWPWR,
+	S5P_EPLL_SYSCLK_LOWPWR,
+	S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR,
+	S5P_CMU_RESET_GPSALIVE_LOWPWR,
+	S5P_CMU_CLKSTOP_CAM_LOWPWR,
+	S5P_CMU_CLKSTOP_TV_LOWPWR,
+	S5P_CMU_CLKSTOP_MFC_LOWPWR,
+	S5P_CMU_CLKSTOP_G3D_LOWPWR,
+	S5P_CMU_CLKSTOP_LCD0_LOWPWR,
+	S5P_CMU_CLKSTOP_LCD1_LOWPWR,
+	S5P_CMU_CLKSTOP_MAUDIO_LOWPWR,
+	S5P_CMU_CLKSTOP_GPS_LOWPWR,
+	S5P_CMU_RESET_CAM_LOWPWR,
+	S5P_CMU_RESET_TV_LOWPWR,
+	S5P_CMU_RESET_MFC_LOWPWR,
+	S5P_CMU_RESET_G3D_LOWPWR,
+	S5P_CMU_RESET_LCD0_LOWPWR,
+	S5P_CMU_RESET_LCD1_LOWPWR,
+	S5P_CMU_RESET_MAUDIO_LOWPWR,
+	S5P_CMU_RESET_GPS_LOWPWR,
+	S5P_TOP_BUS_LOWPWR,
+	S5P_TOP_RETENTION_LOWPWR,
+	S5P_TOP_PWR_LOWPWR,
+	S5P_LOGIC_RESET_LOWPWR,
+	S5P_ONENAND_MEM_LOWPWR,
+	S5P_MODIMIF_MEM_LOWPWR,
+	S5P_G2D_ACP_MEM_LOWPWR,
+	S5P_USBOTG_MEM_LOWPWR,
+	S5P_HSMMC_MEM_LOWPWR,
+	S5P_CSSYS_MEM_LOWPWR,
+	S5P_SECSS_MEM_LOWPWR,
+	S5P_PCIE_MEM_LOWPWR,
+	S5P_SATA_MEM_LOWPWR,
+	S5P_PAD_RETENTION_DRAM_LOWPWR,
+	S5P_PAD_RETENTION_MAUDIO_LOWPWR,
+	S5P_PAD_RETENTION_GPIO_LOWPWR,
+	S5P_PAD_RETENTION_UART_LOWPWR,
+	S5P_PAD_RETENTION_MMCA_LOWPWR,
+	S5P_PAD_RETENTION_MMCB_LOWPWR,
+	S5P_PAD_RETENTION_EBIA_LOWPWR,
+	S5P_PAD_RETENTION_EBIB_LOWPWR,
+	S5P_PAD_RETENTION_ISOLATION_LOWPWR,
+	S5P_PAD_RETENTION_ALV_SEL_LOWPWR,
+	S5P_XUSBXTI_LOWPWR,
+	S5P_XXTI_LOWPWR,
+	S5P_EXT_REGULATOR_LOWPWR,
+	S5P_GPIO_MODE_LOWPWR,
+	S5P_GPIO_MODE_MAUDIO_LOWPWR,
+	S5P_CAM_LOWPWR,
+	S5P_TV_LOWPWR,
+	S5P_MFC_LOWPWR,
+	S5P_G3D_LOWPWR,
+	S5P_LCD0_LOWPWR,
+	S5P_LCD1_LOWPWR,
+	S5P_MAUDIO_LOWPWR,
+	S5P_GPS_LOWPWR,
+	S5P_GPS_ALIVE_LOWPWR,
+};
+
+static const unsigned int sys_powerdown_val[][NUM_SYS_POWERDOWN] = {
+	/* { AFTR, LPA, SLEEP }*/
+	{ 0, 0, 2 },	/* ARM_CORE0 */
+	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CORE0 */
+	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CENTRAL0 */
+	{ 0, 0, 2 },	/* ARM_CORE1 */
+	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CORE1 */
+	{ 0, 0, 0 },	/* ARM_DIS_IRQ_CENTRAL1 */
+	{ 0, 0, 2 },	/* ARM_COMMON */
+	{ 2, 2, 3 },	/* ARM_CPU_L2_0 */
+	{ 2, 2, 3 },	/* ARM_CPU_L2_1 */
+	{ 1, 0, 0 },	/* CMU_ACLKSTOP */
+	{ 1, 0, 0 },	/* CMU_SCLKSTOP */
+	{ 1, 1, 0 },	/* CMU_RESET */
+	{ 1, 0, 0 },	/* APLL_SYSCLK */
+	{ 1, 0, 0 },	/* MPLL_SYSCLK */
+	{ 1, 0, 0 },	/* VPLL_SYSCLK */
+	{ 1, 1, 0 },	/* EPLL_SYSCLK */
+	{ 1, 1, 0 },	/* CMU_CLKSTOP_GPS_ALIVE */
+	{ 1, 1, 0 },	/* CMU_RESET_GPS_ALIVE */
+	{ 1, 1, 0 },	/* CMU_CLKSTOP_CAM */
+	{ 1, 1, 0 },	/* CMU_CLKSTOP_TV */
+	{ 1, 1, 0 },	/* CMU_CLKSTOP_MFC */
+	{ 1, 1, 0 },	/* CMU_CLKSTOP_G3D */
+	{ 1, 1, 0 },	/* CMU_CLKSTOP_LCD0 */
+	{ 1, 1, 0 },	/* CMU_CLKSTOP_LCD1 */
+	{ 1, 1, 0 },	/* CMU_CLKSTOP_MAUDIO */
+	{ 1, 1, 0 },	/* CMU_CLKSTOP_GPS */
+	{ 1, 1, 0 },	/* CMU_RESET_CAM */
+	{ 1, 1, 0 },	/* CMU_RESET_TV */
+	{ 1, 1, 0 },	/* CMU_RESET_MFC */
+	{ 1, 1, 0 },	/* CMU_RESET_G3D */
+	{ 1, 1, 0 },	/* CMU_RESET_LCD0 */
+	{ 1, 1, 0 },	/* CMU_RESET_LCD1 */
+	{ 1, 1, 0 },	/* CMU_RESET_MAUDIO */
+	{ 1, 1, 0 },	/* CMU_RESET_GPS */
+	{ 3, 0, 0 },	/* TOP_BUS */
+	{ 1, 0, 1 },	/* TOP_RETENTION */
+	{ 3, 0, 3 },	/* TOP_PWR */
+	{ 1, 1, 0 },	/* LOGIC_RESET */
+	{ 3, 0, 0 },	/* ONENAND_MEM */
+	{ 3, 0, 0 },	/* MODIMIF_MEM */
+	{ 3, 0, 0 },	/* G2D_ACP_MEM */
+	{ 3, 0, 0 },	/* USBOTG_MEM */
+	{ 3, 0, 0 },	/* HSMMC_MEM */
+	{ 3, 0, 0 },	/* CSSYS_MEM */
+	{ 3, 0, 0 },	/* SECSS_MEM */
+	{ 3, 0, 0 },	/* PCIE_MEM */
+	{ 3, 0, 0 },	/* SATA_MEM */
+	{ 1, 0, 0 },	/* PAD_RETENTION_DRAM */
+	{ 1, 1, 0 },	/* PAD_RETENTION_MAUDIO */
+	{ 1, 0, 0 },	/* PAD_RETENTION_GPIO */
+	{ 1, 0, 0 },	/* PAD_RETENTION_UART */
+	{ 1, 0, 0 },	/* PAD_RETENTION_MMCA */
+	{ 1, 0, 0 },	/* PAD_RETENTION_MMCB */
+	{ 1, 0, 0 },	/* PAD_RETENTION_EBIA */
+	{ 1, 0, 0 },	/* PAD_RETENTION_EBIB */
+	{ 1, 0, 0 },	/* PAD_RETENTION_ISOLATION */
+	{ 1, 0, 0 },	/* PAD_RETENTION_ALV_SEL */
+	{ 1, 1, 0 },	/* XUSBXTI */
+	{ 1, 1, 0 },	/* XXTI */
+	{ 1, 1, 0 },	/* EXT_REGULATOR */
+	{ 1, 0, 0 },	/* GPIO_MODE */
+	{ 1, 1, 0 },	/* GPIO_MODE_MAUDIO */
+	{ 7, 0, 0 },	/* CAM */
+	{ 7, 0, 0 },	/* TV */
+	{ 7, 0, 0 },	/* MFC */
+	{ 7, 0, 0 },	/* G3D */
+	{ 7, 0, 0 },	/* LCD0 */
+	{ 7, 0, 0 },	/* LCD1 */
+	{ 7, 7, 0 },	/* MAUDIO */
+	{ 7, 0, 0 },	/* GPS */
+	{ 7, 0, 0 },	/* GPS_ALIVE */
+};
+
+void exynos4_sys_powerdown_conf(enum sys_powerdown mode)
+{
+	unsigned int count = ARRAY_SIZE(sys_powerdown_reg);
+
+	for (; count > 0; count--)
+		__raw_writel(sys_powerdown_val[count - 1][mode],
+				sys_powerdown_reg[count - 1]);
+}
-- 
1.7.1

  reply	other threads:[~2011-06-22  8:46 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-22  8:46 [PATCH 0/7] ARM: EXYNOS4: Update PM Kukjin Kim
2011-06-22  8:46 ` Kukjin Kim [this message]
2011-06-22  8:46 ` [PATCH 2/7] ARM: EXYNOS4: Remove PMU configuration for S2RAM Kukjin Kim
2011-06-22  8:46 ` [PATCH 3/7] ARM: EXYNOS4: Add support PM with external GIC Kukjin Kim
2011-06-22  8:46 ` [PATCH 4/7] ARM: EXYNOS4: Support early wakeup while entering sleep mode Kukjin Kim
2011-06-22 14:57   ` Russell King - ARM Linux
2011-06-24  7:42     ` Kukjin Kim
2011-06-24  9:37       ` Russell King - ARM Linux
2011-06-24 10:22         ` Russell King - ARM Linux
2011-07-01  1:03           ` Kukjin Kim
2011-07-01  7:44             ` Russell King - ARM Linux
2011-07-04  9:42               ` Kukjin Kim
2011-07-04  9:52                 ` Russell King - ARM Linux
2011-06-29  4:58         ` Kukjin Kim
2011-06-22  8:46 ` [PATCH 5/7] ARM: EXYNOS4: Add save/restore function for PLL Kukjin Kim
2011-06-22  8:46 ` [PATCH 6/7] ARM: EXYNOS4: Add save/restore for more ARM registers Kukjin Kim
2011-06-22 14:54   ` Russell King - ARM Linux
2011-06-23  6:39     ` Kukjin Kim
2011-06-23  7:51       ` Russell King - ARM Linux
2011-06-23  8:00         ` Kukjin Kim
2011-06-22  8:46 ` [PATCH 7/7] ARM: EXYNOS4: Move S5P_CENTRAL_SEQ_CONFIGURATION setting for PM Kukjin Kim
2011-06-22 12:10   ` Sergei Shtylyov
2011-06-23  8:05     ` Kukjin Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1308732405-16664-2-git-send-email-kgene.kim@samsung.com \
    --to=kgene.kim@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).