[PATCH v2 1/2] OMAP: 4430SDP: Register the card detect GPIO properly

[PATCH v2 1/2] OMAP: 4430SDP: Register the card detect GPIO properly

[Silesh C V]

Without this the HSMMC driver takes GPIO 0 to be the card detect gpio
and requests/configures it. This will give rise to issues when another
driver needs to use GPIO 0. On 4430SDP, the card detection is through
TWL 6030.

Signed-off-by: Silesh C V <silesh@ti.com>
---
Changes for v2 :
	- Made it a series to make sure this one goes before the mux fix.

 arch/arm/mach-omap2/board-4430sdp.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 63de2d3..7a1460f 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -327,6 +327,7 @@ static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
+		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
 	},
 	{}	/* Terminator */
-- 
1.7.1

[PATCH v2 2/2] OMAP: HSMMC: Fix GPIO muxing

[Silesh C V]

Use generic gpio call to check the validity of the gpio. Note that
this includes gpio 0 also which was missing before.

Signed-off-by: Silesh C V <silesh@ti.com>
---
 arch/arm/mach-omap2/hsmmc.c |    7 +++----
 1 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 66868c5..a9b45c7 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -13,6 +13,7 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <mach/hardware.h>
 #include <plat/mmc.h>
 #include <plat/omap-pm.h>
@@ -213,12 +214,10 @@ static int nop_mmc_set_power(struct device *dev, int slot, int power_on,
 static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
 			int controller_nr)
 {
-	if ((mmc_controller->slots[0].switch_pin > 0) && \
-		(mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
+	if (gpio_is_valid(mmc_controller->slots[0].switch_pin))
 		omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
 					OMAP_PIN_INPUT_PULLUP);
-	if ((mmc_controller->slots[0].gpio_wp > 0) && \
-		(mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
+	if (gpio_is_valid(mmc_controller->slots[0].gpio_wp))
 		omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
 					OMAP_PIN_INPUT_PULLUP);
 	if (cpu_is_omap34xx()) {
-- 
1.7.1