public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: b32955@freescale.com (Huang Shijie)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V4 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28
Date: Wed, 29 Jun 2011 15:54:40 +0800	[thread overview]
Message-ID: <1309334082-9501-2-git-send-email-b32955@freescale.com> (raw)
In-Reply-To: <1309334082-9501-1-git-send-email-b32955@freescale.com>

add GPMI-NFC support for imx23 and imx28.

Signed-off-by: Huang Shijie <b32955@freescale.com>
---
 arch/arm/mach-mxs/Kconfig                 |    2 +
 arch/arm/mach-mxs/include/mach/gpmi-nfc.h |   71 +++++++++++++++++++++++++++++
 2 files changed, 73 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-mxs/include/mach/gpmi-nfc.h

diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 1d3985f..a5b753a 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -32,6 +32,7 @@ config MACH_MX23EVK
 	select SOC_IMX23
 	select MXS_HAVE_AMBA_DUART
 	select MXS_HAVE_PLATFORM_AUART
+	select MXS_HAVE_PLATFORM_GPMI_NFC
 	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXSFB
 	help
@@ -46,6 +47,7 @@ config MACH_MX28EVK
 	select MXS_HAVE_PLATFORM_AUART
 	select MXS_HAVE_PLATFORM_FEC
 	select MXS_HAVE_PLATFORM_FLEXCAN
+	select MXS_HAVE_PLATFORM_GPMI_NFC
 	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXSFB
 	select MXS_OCOTP
diff --git a/arch/arm/mach-mxs/include/mach/gpmi-nfc.h b/arch/arm/mach-mxs/include/mach/gpmi-nfc.h
new file mode 100644
index 0000000..25fc605
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/gpmi-nfc.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __INCLUDE_GPMI_NFC_H
+#define __INCLUDE_GPMI_NFC_H
+
+/* The size of the resource is fixed. */
+#define RES_SIZE	6
+
+/* Resource names for the GPMI NFC driver. */
+#define GPMI_NFC_GPMI_REGS_ADDR_RES_NAME  "GPMI NFC GPMI Registers"
+#define GPMI_NFC_GPMI_INTERRUPT_RES_NAME  "GPMI NFC GPMI Interrupt"
+#define GPMI_NFC_BCH_REGS_ADDR_RES_NAME   "GPMI NFC BCH Registers"
+#define GPMI_NFC_BCH_INTERRUPT_RES_NAME   "GPMI NFC BCH Interrupt"
+#define GPMI_NFC_DMA_CHANNELS_RES_NAME    "GPMI NFC DMA Channels"
+#define GPMI_NFC_DMA_INTERRUPT_RES_NAME   "GPMI NFC DMA Interrupt"
+
+/**
+ * struct gpmi_nfc_platform_data - GPMI NFC driver platform data.
+ *
+ * This structure communicates platform-specific information to the GPMI NFC
+ * driver that can't be expressed as resources.
+ *
+ * @platform_init:           A pointer to a function the driver will call to
+ *                           initialize the platform (e.g., set up the pin mux).
+ * @platform_exit:           A pointer to a function the driver will call to
+ *                           exit the platform (e.g., free pins).
+ * @min_prop_delay_in_ns:    Minimum propagation delay of GPMI signals to and
+ *                           from the NAND Flash device, in nanoseconds.
+ * @max_prop_delay_in_ns:    Maximum propagation delay of GPMI signals to and
+ *                           from the NAND Flash device, in nanoseconds.
+ * @max_chip_count:          The maximum number of chips for which the driver
+ *                           should configure the hardware. This value most
+ *                           likely reflects the number of pins that are
+ *                           connected to a NAND Flash device. If this is
+ *                           greater than the SoC hardware can support, the
+ *                           driver will print a message and fail to initialize.
+ * @partitions:              An optional pointer to an array of partition
+ *                           descriptions.
+ * @partition_count:         The number of elements in the partitions array.
+ */
+struct gpmi_nfc_platform_data {
+	/* SoC hardware information. */
+	int		(*platform_init)(void);
+	void		(*platform_exit)(void);
+
+	/* NAND Flash information. */
+	unsigned int	min_prop_delay_in_ns;
+	unsigned int	max_prop_delay_in_ns;
+	unsigned int	max_chip_count;
+
+	/* Medium information. */
+	struct mtd_partition *partitions;
+	unsigned	partition_count;
+};
+#endif
-- 
1.7.0.4

  reply	other threads:[~2011-06-29  7:54 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-29  7:54 [PATCH V4 0/3] add the GPMI-NFC support for imx23/imx28 Huang Shijie
2011-06-29  7:54 ` Huang Shijie [this message]
2011-06-29  8:05   ` [PATCH V4 1/3] ARM: mxs: add " Uwe Kleine-König
2011-06-29  8:21     ` Huang Shijie
2011-06-29  7:54 ` [PATCH V4 2/3] ARM: mxs: add GPMI-NFC device for imx23 Huang Shijie
2011-06-29  8:08   ` Uwe Kleine-König
2011-06-29  9:21     ` Huang Shijie
2011-06-29  7:54 ` [PATCH V4 3/3] ARM: mxs: add GPMI-NFC device for imx28 Huang Shijie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1309334082-9501-2-git-send-email-b32955@freescale.com \
    --to=b32955@freescale.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox