From mboxrd@z Thu Jan 1 00:00:00 1970 From: b-cousson@ti.com (Benoit Cousson) Date: Fri, 1 Jul 2011 22:41:27 +0200 Subject: [PATCH v2 04/18] OMAP4: clock data: Add sddiv to USB DPLL In-Reply-To: <1309552901-8944-1-git-send-email-b-cousson@ti.com> References: <1309552901-8944-1-git-send-email-b-cousson@ti.com> Message-ID: <1309552901-8944-5-git-send-email-b-cousson@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The USB DPLL is a J-Type DPLL with the sddiv extra parameter. On the other hand, the UNIPRO is not a J-Type and thus does not require this flag. Add it in USB DPLL and remove it in UNIPRO DPLL. Signed-off-by: Benoit Cousson Cc: Paul Walmsley --- arch/arm/mach-omap2/clock44xx_data.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 72a3976..bd2aa4b 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -949,7 +949,6 @@ static struct dpll_data dpll_unipro_dd = { .enable_mask = OMAP4430_DPLL_EN_MASK, .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, - .sddiv_mask = OMAP4430_DPLL_SD_DIV_MASK, .max_multiplier = OMAP4430_MAX_DPLL_MULT, .max_divider = OMAP4430_MAX_DPLL_DIV, .min_divider = 1, @@ -1015,6 +1014,7 @@ static struct dpll_data dpll_usb_dd = { .enable_mask = OMAP4430_DPLL_EN_MASK, .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .sddiv_mask = OMAP4430_DPLL_SD_DIV_MASK, .max_multiplier = OMAP4430_MAX_DPLL_MULT, .max_divider = OMAP4430_MAX_DPLL_DIV, .min_divider = 1, -- 1.7.0.4