From: nicolas.pitre@linaro.org (Nicolas Pitre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 20/52] ARM: mach-kirkwood: convert boot_params to atag_offset
Date: Tue, 05 Jul 2011 22:47:05 -0400 [thread overview]
Message-ID: <1309920457-21913-20-git-send-email-nicolas.pitre@linaro.org> (raw)
In-Reply-To: <1309920457-21913-1-git-send-email-nicolas.pitre@linaro.org>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
arch/arm/mach-kirkwood/d2net_v2-setup.c | 2 +-
arch/arm/mach-kirkwood/db88f6281-bp-setup.c | 2 +-
arch/arm/mach-kirkwood/dockstar-setup.c | 2 +-
arch/arm/mach-kirkwood/guruplug-setup.c | 2 +-
arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c | 2 +-
arch/arm/mach-kirkwood/netspace_v2-setup.c | 6 +++---
arch/arm/mach-kirkwood/netxbig_v2-setup.c | 4 ++--
arch/arm/mach-kirkwood/openrd-setup.c | 6 +++---
arch/arm/mach-kirkwood/rd88f6192-nas-setup.c | 2 +-
arch/arm/mach-kirkwood/rd88f6281-setup.c | 2 +-
arch/arm/mach-kirkwood/sheevaplug-setup.c | 4 ++--
arch/arm/mach-kirkwood/t5325-setup.c | 2 +-
arch/arm/mach-kirkwood/ts219-setup.c | 2 +-
arch/arm/mach-kirkwood/ts41x-setup.c | 2 +-
14 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index 043cfd5..f457e07 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -221,7 +221,7 @@ static void __init d2net_v2_init(void)
}
MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = d2net_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index bff04e0..ff4c21c 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -97,7 +97,7 @@ subsys_initcall(db88f6281_pci_init);
MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
/* Maintainer: Saeed Bishara <saeed@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = db88f6281_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index f14dfb8..e4d199b 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -102,7 +102,7 @@ static void __init dockstar_init(void)
}
MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = dockstar_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index 41d1b40..6c40f78 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -121,7 +121,7 @@ static void __init guruplug_init(void)
MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
/* Maintainer: Siddarth Gore <gores@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = guruplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 00cca22..9a1e917 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -163,7 +163,7 @@ subsys_initcall(mv88f6281gtw_ge_pci_init);
MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = mv88f6281gtw_ge_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 7cdab57..8849bcc 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -258,7 +258,7 @@ static void __init netspace_v2_init(void)
#ifdef CONFIG_MACH_NETSPACE_V2
MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -269,7 +269,7 @@ MACHINE_END
#ifdef CONFIG_MACH_INETSPACE_V2
MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -280,7 +280,7 @@ MACHINE_END
#ifdef CONFIG_MACH_NETSPACE_MAX_V2
MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 6be627d..1ba12c4 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -399,7 +399,7 @@ static void __init netxbig_v2_init(void)
#ifdef CONFIG_MACH_NET2BIG_V2
MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -410,7 +410,7 @@ MACHINE_END
#ifdef CONFIG_MACH_NET5BIG_V2
MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index f69beef..5660ca6 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -214,7 +214,7 @@ subsys_initcall(openrd_pci_init);
#ifdef CONFIG_MACH_OPENRD_BASE
MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -226,7 +226,7 @@ MACHINE_END
#ifdef CONFIG_MACH_OPENRD_CLIENT
MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -238,7 +238,7 @@ MACHINE_END
#ifdef CONFIG_MACH_OPENRD_ULTIMATE
MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 75c6601..6663869 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -79,7 +79,7 @@ subsys_initcall(rd88f6192_pci_init);
MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
/* Maintainer: Saeed Bishara <saeed@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f6192_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 0f75494..66b3c05 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -115,7 +115,7 @@ subsys_initcall(rd88f6281_pci_init);
MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
/* Maintainer: Saeed Bishara <saeed@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f6281_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 17de0bf..8b102d6 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -138,7 +138,7 @@ static void __init sheevaplug_init(void)
#ifdef CONFIG_MACH_SHEEVAPLUG
MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
/* Maintainer: shadi Ammouri <shadi@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = sheevaplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -149,7 +149,7 @@ MACHINE_END
#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = sheevaplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index e6b9b1b..ea104fb 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -201,7 +201,7 @@ subsys_initcall(hp_t5325_pci_init);
MACHINE_START(T5325, "HP t5325 Thin Client")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = hp_t5325_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 68f32f2..262c034 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -132,7 +132,7 @@ subsys_initcall(ts219_pci_init);
MACHINE_START(TS219, "QNAP TS-119/TS-219")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = qnap_ts219_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index d5d0099..b68f5b4 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -176,7 +176,7 @@ subsys_initcall(ts41x_pci_init);
MACHINE_START(TS41X, "QNAP TS-41x")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = qnap_ts41x_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
--
1.7.4
next prev parent reply other threads:[~2011-07-06 2:47 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-06 2:46 [PATCH 01/52] ARM: introduce atag_offset to replace boot_params Nicolas Pitre
2011-07-06 2:46 ` [PATCH 02/52] ARM: mach-clps711x: convert boot_params to atag_offset Nicolas Pitre
2011-07-06 2:46 ` [PATCH 03/52] ARM: mach-cns3xxx: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 04/52] ARM: mach-davinci: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 05/52] ARM: mach-dove: convert boot-params " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 06/52] ARM: mach-ebsa110: convert boot_params " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 07/52] ARM: mach-ep93xx: " Nicolas Pitre
2011-07-07 16:32 ` H Hartley Sweeten
2011-07-07 16:59 ` Nicolas Pitre
2011-07-07 17:20 ` H Hartley Sweeten
2011-07-07 18:20 ` Nicolas Pitre
2011-07-06 2:46 ` [PATCH 08/52] ARM: mach-exynos4: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 09/52] ARM: mach-footbridge: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 10/52] ARM: mach-gemini: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 11/52] ARM: mach-h720x: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 12/52] ARM: mach-imx: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 13/52] ARM: mach-integrator: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 14/52] ARM: mach-iop13xx: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 15/52] ARM: mach-iop32x: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 16/52] ARM: mach-iop33x: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 17/52] ARM: mach-ixp2000: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 18/52] ARM: mach-ixp23xx: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 19/52] ARM: mach-ixp4xx: " Nicolas Pitre
2011-07-06 2:47 ` Nicolas Pitre [this message]
2011-07-06 2:47 ` [PATCH 21/52] ARM: mach-ks8695: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 22/52] ARM: mach-loki: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 23/52] ARM: mach-lpc32xx: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 24/52] ARM: mach-msm: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 25/52] ARM: mach-mv78xx0: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 26/52] ARM: mach-mx5: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 27/52] ARM: mach-netx: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 28/52] ARM: mach-nomadik: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 29/52] ARM: mach-nuc93x: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 30/52] ARM: mach-omap1: " Nicolas Pitre
2011-07-07 14:28 ` Tony Lindgren
2011-07-06 2:47 ` [PATCH 31/52] ARM: mach-omap2: " Nicolas Pitre
2011-07-07 14:28 ` Tony Lindgren
2011-07-07 15:35 ` Nicolas Pitre
2011-07-06 2:47 ` [PATCH 32/52] ARM: mach-orion5x: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 33/52] ARM: mach-pnx4008: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 34/52] ARM: mach-pxa: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 35/52] ARM: mach-realview: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 36/52] ARM: mach-rpc: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 37/52] ARM: mach-s3c24*: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 38/52] ARM: mach-s5p64x0: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 39/52] ARM: mach-s3c64xx: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 40/52] ARM: mach-s5pc100, mach-s5pv210: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 41/52] ARM: mach-sa1100: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 42/52] ARM: mach-shark: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 43/52] ARM: mach-spear*: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 44/52] ARM: mach-tcc8k: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 45/52] ARM: mach-tegra: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 46/52] ARM: mach-u300: " Nicolas Pitre
2011-07-08 13:12 ` Linus Walleij
2011-07-08 21:20 ` Russell King - ARM Linux
2011-07-06 2:47 ` [PATCH 47/52] ARM: mach-ux500: convert boot-params " Nicolas Pitre
2011-07-08 13:18 ` Linus Walleij
2011-07-06 2:47 ` [PATCH 48/52] ARM: mach-versatile: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 49/52] ARM: vexpress: convert boot_params " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 50/52] ARM: mach-vt8500: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 51/52] ARM: mach-w90x900: remove useless boot_params entries Nicolas Pitre
2011-07-06 2:47 ` [PATCH 52/52] ARM: remove boot_params from struct machine_desc Nicolas Pitre
2011-07-06 4:28 ` [PATCH 01/52] ARM: introduce atag_offset to replace boot_params Stephen Boyd
2011-07-06 12:54 ` Nicolas Pitre
2011-07-06 17:59 ` Stephen Boyd
2011-07-07 0:43 ` H Hartley Sweeten
2011-07-07 4:04 ` Nicolas Pitre
2011-07-07 18:28 ` H Hartley Sweeten
2011-07-07 11:37 ` Sergei Shtylyov
2011-07-07 15:37 ` Nicolas Pitre
2011-07-07 15:45 ` Arnd Bergmann
2011-07-08 20:36 ` Russell King - ARM Linux
2011-07-08 21:20 ` Nicolas Pitre
2011-07-11 14:59 ` Nicolas Pitre
2011-07-11 17:17 ` H Hartley Sweeten
2011-07-12 20:48 ` Petr Štetiar
2011-07-12 21:39 ` H Hartley Sweeten
2011-07-15 6:48 ` Petr Štetiar
2011-07-15 22:40 ` H Hartley Sweeten
2011-07-16 2:44 ` Nicolas Pitre
2011-07-13 3:22 ` Nicolas Pitre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1309920457-21913-20-git-send-email-nicolas.pitre@linaro.org \
--to=nicolas.pitre@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).