From: nicolas.pitre@linaro.org (Nicolas Pitre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 32/52] ARM: mach-orion5x: convert boot_params to atag_offset
Date: Tue, 05 Jul 2011 22:47:17 -0400 [thread overview]
Message-ID: <1309920457-21913-32-git-send-email-nicolas.pitre@linaro.org> (raw)
In-Reply-To: <1309920457-21913-1-git-send-email-nicolas.pitre@linaro.org>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
arch/arm/mach-orion5x/d2net-setup.c | 4 ++--
arch/arm/mach-orion5x/db88f5281-setup.c | 2 +-
arch/arm/mach-orion5x/dns323-setup.c | 2 +-
arch/arm/mach-orion5x/edmini_v2-setup.c | 2 +-
arch/arm/mach-orion5x/kurobox_pro-setup.c | 4 ++--
arch/arm/mach-orion5x/ls-chl-setup.c | 2 +-
arch/arm/mach-orion5x/ls_hgl-setup.c | 2 +-
arch/arm/mach-orion5x/lsmini-setup.c | 2 +-
arch/arm/mach-orion5x/mss2-setup.c | 2 +-
arch/arm/mach-orion5x/mv2120-setup.c | 2 +-
arch/arm/mach-orion5x/net2big-setup.c | 2 +-
arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c | 2 +-
arch/arm/mach-orion5x/rd88f5181l-ge-setup.c | 2 +-
arch/arm/mach-orion5x/rd88f5182-setup.c | 2 +-
arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c | 2 +-
arch/arm/mach-orion5x/terastation_pro2-setup.c | 2 +-
arch/arm/mach-orion5x/ts209-setup.c | 2 +-
arch/arm/mach-orion5x/ts409-setup.c | 2 +-
arch/arm/mach-orion5x/ts78xx-setup.c | 2 +-
arch/arm/mach-orion5x/wnr854t-setup.c | 2 +-
arch/arm/mach-orion5x/wrt350n-v2-setup.c | 2 +-
21 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 19cf5bf..8c83009 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -336,7 +336,7 @@ static void __init d2net_init(void)
#ifdef CONFIG_MACH_D2NET
MACHINE_START(D2NET, "LaCie d2 Network")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = d2net_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
@@ -348,7 +348,7 @@ MACHINE_END
#ifdef CONFIG_MACH_BIGDISK
MACHINE_START(BIGDISK, "LaCie Big Disk Network")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = d2net_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index f95d3cb..5af3a76 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -358,7 +358,7 @@ static void __init db88f5281_init(void)
MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = db88f5281_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 855e0e7..23c46af 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -730,7 +730,7 @@ static void __init dns323_init(void)
/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
MACHINE_START(DNS323, "D-Link DNS-323")
/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = dns323_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
index b67cff0..70a4e92 100644
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -251,7 +251,7 @@ static void __init edmini_v2_init(void)
/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2")
/* Maintainer: Christopher Moore <moore@free.fr> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = edmini_v2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index c0eb646..6323ec3 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -379,7 +379,7 @@ static void __init kurobox_pro_init(void)
#ifdef CONFIG_MACH_KUROBOX_PRO
MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = kurobox_pro_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
@@ -392,7 +392,7 @@ MACHINE_END
#ifdef CONFIG_MACH_LINKSTATION_PRO
MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = kurobox_pro_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 5065803..9503fff 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -318,7 +318,7 @@ static void __init lschl_init(void)
MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
/* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = lschl_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index 8503d0a..ed6d772 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -265,7 +265,7 @@ static void __init ls_hgl_init(void)
MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = ls_hgl_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index 9c82723..743f7f1 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -267,7 +267,7 @@ static void __init lsmini_init(void)
#ifdef CONFIG_MACH_LINKSTATION_MINI
MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
/* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = lsmini_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 59263b7..5062060 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -261,7 +261,7 @@ static void __init mss2_init(void)
MACHINE_START(MSS2, "Maxtor Shared Storage II")
/* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = mss2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 63ff10c..b3356ad 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -229,7 +229,7 @@ static void __init mv2120_init(void)
/* Warning: HP uses a wrong mach-type (=526) in their bootloader */
MACHINE_START(MV2120, "HP Media Vault mv2120")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = mv2120_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index e43b39c..6197c79 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -419,7 +419,7 @@ static void __init net2big_init(void)
/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
MACHINE_START(NET2BIG, "LaCie 2Big Network")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = net2big_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 9eec7c2..e241b55 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -169,7 +169,7 @@ subsys_initcall(rd88f5181l_fxo_pci_init);
MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
/* Maintainer: Nicolas Pitre <nico@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f5181l_fxo_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 0cc90bb..7ef3e43 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -181,7 +181,7 @@ subsys_initcall(rd88f5181l_ge_pci_init);
MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f5181l_ge_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 48da39b..3352c07 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -305,7 +305,7 @@ static void __init rd88f5182_init(void)
MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f5182_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index ad2eba9..e06fdae 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -122,7 +122,7 @@ subsys_initcall(rd88f6183ap_ge_pci_init);
MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f6183ap_ge_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 29ce826..2b7164f 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -358,7 +358,7 @@ static void __init tsp2_init(void)
MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
/* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = tsp2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 47162fd..cae76f4 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -322,7 +322,7 @@ static void __init qnap_ts209_init(void)
MACHINE_START(TS209, "QNAP TS-109/TS-209")
/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = qnap_ts209_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 5aacc7a..6c4ffe2 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -311,7 +311,7 @@ static void __init qnap_ts409_init(void)
MACHINE_START(TS409, "QNAP TS-409")
/* Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = qnap_ts409_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 6b7b541..6c75cd3 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -621,7 +621,7 @@ static void __init ts78xx_init(void)
MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
/* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = ts78xx_init,
.map_io = ts78xx_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 444a1c7..612a7c4 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -172,7 +172,7 @@ subsys_initcall(wnr854t_pci_init);
MACHINE_START(WNR854T, "Netgear WNR854T")
/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = wnr854t_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index d1952be..9c73237 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -260,7 +260,7 @@ subsys_initcall(wrt350n_v2_pci_init);
MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = wrt350n_v2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
--
1.7.4
next prev parent reply other threads:[~2011-07-06 2:47 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-06 2:46 [PATCH 01/52] ARM: introduce atag_offset to replace boot_params Nicolas Pitre
2011-07-06 2:46 ` [PATCH 02/52] ARM: mach-clps711x: convert boot_params to atag_offset Nicolas Pitre
2011-07-06 2:46 ` [PATCH 03/52] ARM: mach-cns3xxx: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 04/52] ARM: mach-davinci: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 05/52] ARM: mach-dove: convert boot-params " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 06/52] ARM: mach-ebsa110: convert boot_params " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 07/52] ARM: mach-ep93xx: " Nicolas Pitre
2011-07-07 16:32 ` H Hartley Sweeten
2011-07-07 16:59 ` Nicolas Pitre
2011-07-07 17:20 ` H Hartley Sweeten
2011-07-07 18:20 ` Nicolas Pitre
2011-07-06 2:46 ` [PATCH 08/52] ARM: mach-exynos4: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 09/52] ARM: mach-footbridge: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 10/52] ARM: mach-gemini: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 11/52] ARM: mach-h720x: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 12/52] ARM: mach-imx: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 13/52] ARM: mach-integrator: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 14/52] ARM: mach-iop13xx: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 15/52] ARM: mach-iop32x: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 16/52] ARM: mach-iop33x: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 17/52] ARM: mach-ixp2000: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 18/52] ARM: mach-ixp23xx: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 19/52] ARM: mach-ixp4xx: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 20/52] ARM: mach-kirkwood: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 21/52] ARM: mach-ks8695: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 22/52] ARM: mach-loki: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 23/52] ARM: mach-lpc32xx: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 24/52] ARM: mach-msm: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 25/52] ARM: mach-mv78xx0: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 26/52] ARM: mach-mx5: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 27/52] ARM: mach-netx: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 28/52] ARM: mach-nomadik: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 29/52] ARM: mach-nuc93x: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 30/52] ARM: mach-omap1: " Nicolas Pitre
2011-07-07 14:28 ` Tony Lindgren
2011-07-06 2:47 ` [PATCH 31/52] ARM: mach-omap2: " Nicolas Pitre
2011-07-07 14:28 ` Tony Lindgren
2011-07-07 15:35 ` Nicolas Pitre
2011-07-06 2:47 ` Nicolas Pitre [this message]
2011-07-06 2:47 ` [PATCH 33/52] ARM: mach-pnx4008: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 34/52] ARM: mach-pxa: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 35/52] ARM: mach-realview: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 36/52] ARM: mach-rpc: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 37/52] ARM: mach-s3c24*: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 38/52] ARM: mach-s5p64x0: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 39/52] ARM: mach-s3c64xx: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 40/52] ARM: mach-s5pc100, mach-s5pv210: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 41/52] ARM: mach-sa1100: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 42/52] ARM: mach-shark: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 43/52] ARM: mach-spear*: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 44/52] ARM: mach-tcc8k: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 45/52] ARM: mach-tegra: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 46/52] ARM: mach-u300: " Nicolas Pitre
2011-07-08 13:12 ` Linus Walleij
2011-07-08 21:20 ` Russell King - ARM Linux
2011-07-06 2:47 ` [PATCH 47/52] ARM: mach-ux500: convert boot-params " Nicolas Pitre
2011-07-08 13:18 ` Linus Walleij
2011-07-06 2:47 ` [PATCH 48/52] ARM: mach-versatile: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 49/52] ARM: vexpress: convert boot_params " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 50/52] ARM: mach-vt8500: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 51/52] ARM: mach-w90x900: remove useless boot_params entries Nicolas Pitre
2011-07-06 2:47 ` [PATCH 52/52] ARM: remove boot_params from struct machine_desc Nicolas Pitre
2011-07-06 4:28 ` [PATCH 01/52] ARM: introduce atag_offset to replace boot_params Stephen Boyd
2011-07-06 12:54 ` Nicolas Pitre
2011-07-06 17:59 ` Stephen Boyd
2011-07-07 0:43 ` H Hartley Sweeten
2011-07-07 4:04 ` Nicolas Pitre
2011-07-07 18:28 ` H Hartley Sweeten
2011-07-07 11:37 ` Sergei Shtylyov
2011-07-07 15:37 ` Nicolas Pitre
2011-07-07 15:45 ` Arnd Bergmann
2011-07-08 20:36 ` Russell King - ARM Linux
2011-07-08 21:20 ` Nicolas Pitre
2011-07-11 14:59 ` Nicolas Pitre
2011-07-11 17:17 ` H Hartley Sweeten
2011-07-12 20:48 ` Petr Štetiar
2011-07-12 21:39 ` H Hartley Sweeten
2011-07-15 6:48 ` Petr Štetiar
2011-07-15 22:40 ` H Hartley Sweeten
2011-07-16 2:44 ` Nicolas Pitre
2011-07-13 3:22 ` Nicolas Pitre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1309920457-21913-32-git-send-email-nicolas.pitre@linaro.org \
--to=nicolas.pitre@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).