[PATCH 01/52] ARM: introduce atag_offset to replace boot_params

[PATCH 01/52] ARM: introduce atag_offset to replace boot_params

[Nicolas Pitre]

The boot_params member of the mdesc structure is used to provide a
default physical address for the ATAG list.  Since this value is fixed
at compile time and often based on ARCH_PHYS_OFFSET, it gets in the way
of runtime PHYS_OFFSET usage.

Let's introduce atag_offset which should contains only the relative
offset from start of memory instead of an absolute value, in preparation
to move all instance of boot_params over to it.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/include/asm/mach/arch.h |    1 +
 arch/arm/kernel/setup.c          |    2 ++
 2 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 7b79a00..1bdf6e1 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -18,6 +18,7 @@ struct machine_desc {
 	unsigned int		nr;		/* architecture number	*/
 	const char		*name;		/* architecture name	*/
 	unsigned long		boot_params;	/* tagged list		*/
+	unsigned long		atag_offset;	/* tagged list (relative) */
 	const char		**dt_compat;	/* array of device tree
 						 * 'compatible' strings	*/
 
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index e0db84d..4cc3e2b 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -816,6 +816,8 @@ static struct machine_desc * __init setup_machine_tags(unsigned int nr)
 
 	if (__atags_pointer)
 		tags = phys_to_virt(__atags_pointer);
+	else if(mdesc->atag_offset)
+		tags = PAGE_OFFSET + mdesc->atag_offset;
 	else if (mdesc->boot_params) {
 #ifdef CONFIG_MMU
 		/*
-- 
1.7.4

[PATCH 02/52] ARM: mach-clps711x: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-clps711x/autcpu12.c     |    2 +-
 arch/arm/mach-clps711x/cdb89712.c     |    2 +-
 arch/arm/mach-clps711x/ceiva.c        |    2 +-
 arch/arm/mach-clps711x/clep7312.c     |    2 +-
 arch/arm/mach-clps711x/edb7211-arch.c |    2 +-
 arch/arm/mach-clps711x/fortunet.c     |    1 -
 arch/arm/mach-clps711x/p720t.c        |    2 +-
 7 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index 4a74b2c..0276091 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -64,7 +64,7 @@ void __init autcpu12_map_io(void)
 
 MACHINE_START(AUTCPU12, "autronix autcpu12")
 	/* Maintainer: Thomas Gleixner */
-	.boot_params	= 0xc0020000,
+	.atag_offset	= 0x20000,
 	.map_io		= autcpu12_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index 5a1689d..25b3bfd 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -55,7 +55,7 @@ static void __init cdb89712_map_io(void)
 
 MACHINE_START(CDB89712, "Cirrus-CDB89712")
 	/* Maintainer: Ray Lehtiniemi */
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.map_io		= cdb89712_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index 16481cf..1df9ec6 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -56,7 +56,7 @@ static void __init ceiva_map_io(void)
 
 MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
 	/* Maintainer: Rob Scott */
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.map_io		= ceiva_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c
index 67b5abb4..06c8abd 100644
--- a/arch/arm/mach-clps711x/clep7312.c
+++ b/arch/arm/mach-clps711x/clep7312.c
@@ -37,7 +37,7 @@ fixup_clep7312(struct machine_desc *desc, struct tag *tags,
 
 MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
 	/* Maintainer: Nobody */
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x0100,
 	.fixup		= fixup_clep7312,
 	.map_io		= clps711x_map_io,
 	.init_irq	= clps711x_init_irq,
diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c
index 98ca5b2..abf522d 100644
--- a/arch/arm/mach-clps711x/edb7211-arch.c
+++ b/arch/arm/mach-clps711x/edb7211-arch.c
@@ -57,7 +57,7 @@ fixup_edb7211(struct machine_desc *desc, struct tag *tags,
 
 MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	/* Maintainer: Jon McClintock */
-	.boot_params	= 0xc0020100,	/* 0xc0000000 - 0xc001ffff can be video RAM */
+	.atag_offset	= 0x20100,	/* 0xc0000000 - 0xc001ffff can be video RAM */
 	.fixup		= fixup_edb7211,
 	.map_io		= edb7211_map_io,
 	.reserve	= edb7211_reserve,
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index b1cb479..b6f7d86 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -75,7 +75,6 @@ fortunet_fixup(struct machine_desc *desc, struct tag *tags,
 
 MACHINE_START(FORTUNET, "ARM-FortuNet")
 	/* Maintainer: FortuNet Inc. */
-	.boot_params	= 0x00000000,
 	.fixup		= fortunet_fixup,
 	.map_io		= clps711x_map_io,
 	.init_irq	= clps711x_init_irq,
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index cefbce0..e7f75ae 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -89,7 +89,7 @@ static void __init p720t_map_io(void)
 
 MACHINE_START(P720T, "ARM-Prospector720T")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.fixup		= fixup_p720t,
 	.map_io		= p720t_map_io,
 	.init_irq	= clps711x_init_irq,
-- 
1.7.4

[PATCH 03/52] ARM: mach-cns3xxx: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-cns3xxx/cns3420vb.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 08e5c87..a501f54 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -196,7 +196,7 @@ static void __init cns3420_map_io(void)
 }
 
 MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= cns3420_map_io,
 	.init_irq	= cns3xxx_init_irq,
 	.timer		= &cns3xxx_timer,
-- 
1.7.4

[PATCH 04/52] ARM: mach-davinci: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-davinci/board-da830-evm.c     |    2 +-
 arch/arm/mach-davinci/board-da850-evm.c     |    2 +-
 arch/arm/mach-davinci/board-dm355-evm.c     |    2 +-
 arch/arm/mach-davinci/board-dm355-leopard.c |    2 +-
 arch/arm/mach-davinci/board-dm365-evm.c     |    2 +-
 arch/arm/mach-davinci/board-dm644x-evm.c    |    2 +-
 arch/arm/mach-davinci/board-dm646x-evm.c    |    4 ++--
 arch/arm/mach-davinci/board-mityomapl138.c  |    2 +-
 arch/arm/mach-davinci/board-neuros-osd2.c   |    2 +-
 arch/arm/mach-davinci/board-omapl138-hawk.c |    2 +-
 arch/arm/mach-davinci/board-sffsdr.c        |    2 +-
 arch/arm/mach-davinci/board-tnetv107x-evm.c |    2 +-
 12 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 84fd7868..26d94c0 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -676,7 +676,7 @@ static void __init da830_evm_map_io(void)
 }
 
 MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
-	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.atag_offset	= 0x100,
 	.map_io		= da830_evm_map_io,
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 29671ef..bcbe439 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1256,7 +1256,7 @@ static void __init da850_evm_map_io(void)
 }
 
 MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
-	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.atag_offset	= 0x100,
 	.map_io		= da850_evm_map_io,
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 241a6bd..6556628 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -351,7 +351,7 @@ static __init void dm355_evm_init(void)
 }
 
 MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
-	.boot_params  = (0x80000100),
+	.atag_offset  = 0x100,
 	.map_io	      = dm355_evm_map_io,
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index bee284c..b307470 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -270,7 +270,7 @@ static __init void dm355_leopard_init(void)
 }
 
 MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
-	.boot_params  = (0x80000100),
+	.atag_offset  = 0x100,
 	.map_io	      = dm355_leopard_map_io,
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 9844fa4..00ed6fb 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -612,7 +612,7 @@ static __init void dm365_evm_init(void)
 }
 
 MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
-	.boot_params	= (0x80000100),
+	.atag_offset	= 0x100,
 	.map_io		= dm365_evm_map_io,
 	.init_irq	= davinci_irq_init,
 	.timer		= &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 95607a1..a005e769 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -712,7 +712,7 @@ static __init void davinci_evm_init(void)
 
 MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
 	/* Maintainer: MontaVista Software <source@mvista.com> */
-	.boot_params  = (DAVINCI_DDR_BASE + 0x100),
+	.atag_offset  = 0x100,
 	.map_io	      = davinci_evm_map_io,
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 6d03643..c594518 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -797,7 +797,7 @@ void __init dm646x_board_setup_refclk(struct clk *clk)
 }
 
 MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
-	.boot_params  = (0x80000100),
+	.atag_offset  = 0x100,
 	.map_io       = davinci_map_io,
 	.init_irq     = davinci_irq_init,
 	.timer        = &davinci_timer,
@@ -806,7 +806,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
 MACHINE_END
 
 MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
-	.boot_params  = (0x80000100),
+	.atag_offset  = 0x100,
 	.map_io       = davinci_map_io,
 	.init_irq     = davinci_irq_init,
 	.timer        = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index b8d59ca..fac14c1 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -565,7 +565,7 @@ static void __init mityomapl138_map_io(void)
 }
 
 MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
-	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.atag_offset	= 0x100,
 	.map_io		= mityomapl138_map_io,
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index d60a800..38d6f64 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -272,7 +272,7 @@ static __init void davinci_ntosd2_init(void)
 
 MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
 	/* Maintainer: Neuros Technologies <neuros@groups.google.com> */
-	.boot_params	= (DAVINCI_DDR_BASE + 0x100),
+	.atag_offset	= 0x100,
 	.map_io		 = davinci_ntosd2_map_io,
 	.init_irq	= davinci_irq_init,
 	.timer		= &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 237332a..c6701e4 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -338,7 +338,7 @@ static void __init omapl138_hawk_map_io(void)
 }
 
 MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
-	.boot_params	= (DA8XX_DDR_BASE + 0x100),
+	.atag_offset	= 0x100,
 	.map_io		= omapl138_hawk_map_io,
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 5f4385c..5dd4da9 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -151,7 +151,7 @@ static __init void davinci_sffsdr_init(void)
 
 MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
 	/* Maintainer: Hugo Villeneuve hugo.villeneuve at lyrtech.com */
-	.boot_params  = (DAVINCI_DDR_BASE + 0x100),
+	.atag_offset  = 0x100,
 	.map_io	      = davinci_sffsdr_map_io,
 	.init_irq     = davinci_irq_init,
 	.timer	      = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index 7828920..90ee7b5 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -277,7 +277,7 @@ console_initcall(tnetv107x_evm_console_init);
 #endif
 
 MACHINE_START(TNETV107X, "TNETV107X EVM")
-	.boot_params	= (TNETV107X_DDR_BASE + 0x100),
+	.atag_offset	= 0x100,
 	.map_io		= tnetv107x_init,
 	.init_irq	= cp_intc_init,
 	.timer		= &davinci_timer,
-- 
1.7.4

[PATCH 05/52] ARM: mach-dove: convert boot-params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-dove/cm-a510.c       |    2 +-
 arch/arm/mach-dove/dove-db-setup.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
index 03e11f9..c8a406f 100644
--- a/arch/arm/mach-dove/cm-a510.c
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -87,7 +87,7 @@ static void __init cm_a510_init(void)
 }
 
 MACHINE_START(CM_A510, "Compulab CM-A510 Board")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= cm_a510_init,
 	.map_io		= dove_map_io,
 	.init_early	= dove_init_early,
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index 2ac34ec..11ea34e 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -94,7 +94,7 @@ static void __init dove_db_init(void)
 }
 
 MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= dove_db_init,
 	.map_io		= dove_map_io,
 	.init_early	= dove_init_early,
-- 
1.7.4

[PATCH 06/52] ARM: mach-ebsa110: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-ebsa110/core.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index f8a94d6..e9fb3f2 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -284,7 +284,7 @@ arch_initcall(ebsa110_init);
 
 MACHINE_START(EBSA110, "EBSA110")
 	/* Maintainer: Russell King */
-	.boot_params	= 0x00000400,
+	.atag_offset	= 0x400,
 	.reserve_lp0	= 1,
 	.reserve_lp2	= 1,
 	.soft_reboot	= 1,
-- 
1.7.4

[PATCH 07/52] ARM: mach-ep93xx: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-ep93xx/adssphere.c   |    2 +-
 arch/arm/mach-ep93xx/edb93xx.c     |   16 ++++++++--------
 arch/arm/mach-ep93xx/gesbc9312.c   |    2 +-
 arch/arm/mach-ep93xx/micro9.c      |    8 ++++----
 arch/arm/mach-ep93xx/simone.c      |    2 +-
 arch/arm/mach-ep93xx/snappercl15.c |    2 +-
 arch/arm/mach-ep93xx/ts72xx.c      |    2 +-
 7 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 61b98ce..0713448 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -33,7 +33,7 @@ static void __init adssphere_init_machine(void)
 
 MACHINE_START(ADSSPHERE, "ADS Sphere board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 9969bb1..257175e 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -240,7 +240,7 @@ static void __init edb93xx_init_machine(void)
 #ifdef CONFIG_MACH_EDB9301
 MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
@@ -251,7 +251,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9302
 MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
 	/* Maintainer: George Kashperko <george@chas.com.ua> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
@@ -262,7 +262,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9302A
 MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
@@ -273,7 +273,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9307
 MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
 	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
@@ -284,7 +284,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9307A
 MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
@@ -295,7 +295,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9312
 MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
 	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
@@ -306,7 +306,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9315
 MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
@@ -317,7 +317,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_EDB9315A
 MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 9bd3152..45ee205 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -33,7 +33,7 @@ static void __init gesbc9312_init_machine(void)
 
 MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 7adea62..e72f736 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -77,7 +77,7 @@ static void __init micro9_init_machine(void)
 #ifdef CONFIG_MACH_MICRO9H
 MACHINE_START(MICRO9, "Contec Micro9-High")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
@@ -88,7 +88,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_MICRO9M
 MACHINE_START(MICRO9M, "Contec Micro9-Mid")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
@@ -99,7 +99,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_MICRO9L
 MACHINE_START(MICRO9L, "Contec Micro9-Lite")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
@@ -110,7 +110,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_MICRO9S
 MACHINE_START(MICRO9S, "Contec Micro9-Slim")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index d96dc1c..ac66758 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -66,7 +66,7 @@ static void __init simone_init_machine(void)
 
 MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
 /* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index ac601fe..1b54039 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -163,7 +163,7 @@ static void __init snappercl15_init_machine(void)
 
 MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
 	/* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
-	.boot_params	= EP93XX_SDCE0_PHYS_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer 		= &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index c2d2cf4..1ade3c3 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -257,7 +257,7 @@ static void __init ts72xx_init_machine(void)
 
 MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ts72xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
-- 
1.7.4

[PATCH 07/52] ARM: mach-ep93xx: convert boot_params to atag_offset

[H Hartley Sweeten]

On Tuesday, July 05, 2011 7:47 PM, Nicolas Pitre wrote:
>
> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
> ---
>  arch/arm/mach-ep93xx/adssphere.c   |    2 +-
>  arch/arm/mach-ep93xx/edb93xx.c     |   16 ++++++++--------
>  arch/arm/mach-ep93xx/gesbc9312.c   |    2 +-
>  arch/arm/mach-ep93xx/micro9.c      |    8 ++++----
>  arch/arm/mach-ep93xx/simone.c      |    2 +-
>  arch/arm/mach-ep93xx/snappercl15.c |    2 +-
>  arch/arm/mach-ep93xx/ts72xx.c      |    2 +-
>  7 files changed, 17 insertions(+), 17 deletions(-)

For ep93xx, this appears to be dependant on your patch:

[PATCH 10/37] ARM: mach-ep93xx: remove mach/memory.h and Kconfig selection of SDRAM bank

Please make sure that the merge order of these patches does not
break anything...

Other than that, for the ep93xx part.

Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>

[PATCH 07/52] ARM: mach-ep93xx: convert boot_params to atag_offset

[Nicolas Pitre]

On Thu, 7 Jul 2011, H Hartley Sweeten wrote:

> On Tuesday, July 05, 2011 7:47 PM, Nicolas Pitre wrote:
> >
> > Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
> > ---
> >  arch/arm/mach-ep93xx/adssphere.c   |    2 +-
> >  arch/arm/mach-ep93xx/edb93xx.c     |   16 ++++++++--------
> >  arch/arm/mach-ep93xx/gesbc9312.c   |    2 +-
> >  arch/arm/mach-ep93xx/micro9.c      |    8 ++++----
> >  arch/arm/mach-ep93xx/simone.c      |    2 +-
> >  arch/arm/mach-ep93xx/snappercl15.c |    2 +-
> >  arch/arm/mach-ep93xx/ts72xx.c      |    2 +-
> >  7 files changed, 17 insertions(+), 17 deletions(-)
> 
> For ep93xx, this appears to be dependant on your patch:
> 
> [PATCH 10/37] ARM: mach-ep93xx: remove mach/memory.h and Kconfig selection of SDRAM bank

Actually this should be the other way around: this is a prerequisite for 
the removal patch, but this should only depend on the first patch (1/52) 
of the series.

> Please make sure that the merge order of these patches does not
> break anything...

Obviously.  I'm carrying them linearly in the same branch because of the 
ordering dependencies.

> Other than that, for the ep93xx part.
> 
> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>

Is this valid for both patches?

Thanks


Nicolas

[PATCH 07/52] ARM: mach-ep93xx: convert boot_params to atag_offset

[H Hartley Sweeten]

On Thursday, July 07, 2011 10:00 AM, Nicolas Pitre wrote:
> On Thu, 7 Jul 2011, H Hartley Sweeten wrote:
>> On Tuesday, July 05, 2011 7:47 PM, Nicolas Pitre wrote:
>>>
>>> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
>>> ---
>>>  arch/arm/mach-ep93xx/adssphere.c   |    2 +-
>>>  arch/arm/mach-ep93xx/edb93xx.c     |   16 ++++++++--------
>>>  arch/arm/mach-ep93xx/gesbc9312.c   |    2 +-
>>>  arch/arm/mach-ep93xx/micro9.c      |    8 ++++----
>>>  arch/arm/mach-ep93xx/simone.c      |    2 +-
>>>  arch/arm/mach-ep93xx/snappercl15.c |    2 +-
>>>  arch/arm/mach-ep93xx/ts72xx.c      |    2 +-
>>>  7 files changed, 17 insertions(+), 17 deletions(-)
>> 
>> For ep93xx, this appears to be dependant on your patch:
>> 
>> [PATCH 10/37] ARM: mach-ep93xx: remove mach/memory.h and Kconfig selection of SDRAM bank
>
> Actually this should be the other way around: this is a prerequisite for 
> the removal patch, but this should only depend on the first patch (1/52) 
> of the series.
>
>> Please make sure that the merge order of these patches does not
>> break anything...
>
> Obviously.  I'm carrying them linearly in the same branch because of the 
> ordering dependencies.

Sounds good.

>> Other than that, for the ep93xx part.
>> 
>> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
>
> Is this valid for both patches?

No. This patch only.

For patch 01/52 of this series, please fix the checkpatch.pl issue pointed
out by Sergei Shtylyov and the build warning I pointed out.

Once I see and test that updated patch I'll probably give you a Tested-by.

Thanks,
Hartley

[PATCH 07/52] ARM: mach-ep93xx: convert boot_params to atag_offset

[Nicolas Pitre]

On Thu, 7 Jul 2011, H Hartley Sweeten wrote:

> On Thursday, July 07, 2011 10:00 AM, Nicolas Pitre wrote:
> >> Other than that, for the ep93xx part.
> >> 
> >> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
> >
> > Is this valid for both patches?
> 
> No. This patch only.
> 
> For patch 01/52 of this series, please fix the checkpatch.pl issue pointed
> out by Sergei Shtylyov and the build warning I pointed out.

Both were fixed.

> Once I see and test that updated patch I'll probably give you a Tested-by.

Due to the number of patches, I won't repost them unless a major change 
happens.  However you can see their latest incarnation here:

	http://git.linaro.org/gitweb?p=people/nico/linux.git;a=shortlog;h=refs/heads/redux

or pull them from here:

	git://git.linaro.org/people/nico/linux.git redux

Note that this branch is still going through frequent rebasing.


Nicolas

[PATCH 08/52] ARM: mach-exynos4: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-exynos4/mach-armlex4210.c     |    2 +-
 arch/arm/mach-exynos4/mach-nuri.c           |    2 +-
 arch/arm/mach-exynos4/mach-smdkc210.c       |    2 +-
 arch/arm/mach-exynos4/mach-smdkv310.c       |    2 +-
 arch/arm/mach-exynos4/mach-universal_c210.c |    2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-exynos4/mach-armlex4210.c b/arch/arm/mach-exynos4/mach-armlex4210.c
index b482c62..f0ca6c1 100644
--- a/arch/arm/mach-exynos4/mach-armlex4210.c
+++ b/arch/arm/mach-exynos4/mach-armlex4210.c
@@ -207,7 +207,7 @@ static void __init armlex4210_machine_init(void)
 
 MACHINE_START(ARMLEX4210, "ARMLEX4210")
 	/* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= armlex4210_map_io,
 	.init_machine	= armlex4210_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c
index 642702b..c70ff9d 100644
--- a/arch/arm/mach-exynos4/mach-nuri.c
+++ b/arch/arm/mach-exynos4/mach-nuri.c
@@ -402,7 +402,7 @@ static void __init nuri_machine_init(void)
 
 MACHINE_START(NURI, "NURI")
 	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= nuri_map_io,
 	.init_machine	= nuri_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c
index e645f7a..b9a9909 100644
--- a/arch/arm/mach-exynos4/mach-smdkc210.c
+++ b/arch/arm/mach-exynos4/mach-smdkc210.c
@@ -215,7 +215,7 @@ static void __init smdkc210_machine_init(void)
 
 MACHINE_START(SMDKC210, "SMDKC210")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkc210_map_io,
 	.init_machine	= smdkc210_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index 1526764..3934274 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -240,7 +240,7 @@ static void __init smdkv310_machine_init(void)
 MACHINE_START(SMDKV310, "SMDKV310")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 	/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= smdkv310_map_io,
 	.init_machine	= smdkv310_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c
index 97d329f..df80cd8 100644
--- a/arch/arm/mach-exynos4/mach-universal_c210.c
+++ b/arch/arm/mach-exynos4/mach-universal_c210.c
@@ -642,7 +642,7 @@ static void __init universal_machine_init(void)
 
 MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= exynos4_init_irq,
 	.map_io		= universal_map_io,
 	.init_machine	= universal_machine_init,
-- 
1.7.4

[PATCH 09/52] ARM: mach-footbridge: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-footbridge/cats-hw.c      |    2 +-
 arch/arm/mach-footbridge/ebsa285.c      |    2 +-
 arch/arm/mach-footbridge/netwinder-hw.c |    2 +-
 arch/arm/mach-footbridge/personal.c     |    2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index 5b1a8db..a3da5d1 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -86,7 +86,7 @@ fixup_cats(struct machine_desc *desc, struct tag *tags,
 
 MACHINE_START(CATS, "Chalice-CATS")
 	/* Maintainer: Philip Blundell */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.soft_reboot	= 1,
 	.fixup		= fixup_cats,
 	.map_io		= footbridge_map_io,
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index 2ef69ff..012210c 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -15,7 +15,7 @@
 
 MACHINE_START(EBSA285, "EBSA285")
 	/* Maintainer: Russell King */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.video_start	= 0x000a0000,
 	.video_end	= 0x000bffff,
 	.map_io		= footbridge_map_io,
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index 06e514f..d8c1c92 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -648,7 +648,7 @@ fixup_netwinder(struct machine_desc *desc, struct tag *tags,
 
 MACHINE_START(NETWINDER, "Rebel-NetWinder")
 	/* Maintainer: Russell King/Rebel.com */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.video_start	= 0x000a0000,
 	.video_end	= 0x000bffff,
 	.reserve_lp0	= 1,
diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c
index 3285e91..f41dba3 100644
--- a/arch/arm/mach-footbridge/personal.c
+++ b/arch/arm/mach-footbridge/personal.c
@@ -15,7 +15,7 @@
 
 MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer")
 	/* Maintainer: Jamey Hicks / George France */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= footbridge_map_io,
 	.init_irq	= footbridge_init_irq,
 	.timer		= &footbridge_timer,
-- 
1.7.4

[PATCH 10/52] ARM: mach-gemini: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-gemini/board-nas4220b.c |    2 +-
 arch/arm/mach-gemini/board-rut1xx.c   |    2 +-
 arch/arm/mach-gemini/board-wbd111.c   |    2 +-
 arch/arm/mach-gemini/board-wbd222.c   |    2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c
index 0cf7a07..5927d3c 100644
--- a/arch/arm/mach-gemini/board-nas4220b.c
+++ b/arch/arm/mach-gemini/board-nas4220b.c
@@ -102,7 +102,7 @@ static void __init ib4220b_init(void)
 }
 
 MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
-	.boot_params	= 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= gemini_map_io,
 	.init_irq	= gemini_init_irq,
 	.timer		= &ib4220b_timer,
diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c
index 4fa09af..cd7437a 100644
--- a/arch/arm/mach-gemini/board-rut1xx.c
+++ b/arch/arm/mach-gemini/board-rut1xx.c
@@ -86,7 +86,7 @@ static void __init rut1xx_init(void)
 }
 
 MACHINE_START(RUT100, "Teltonika RUT100")
-	.boot_params	= 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= gemini_map_io,
 	.init_irq	= gemini_init_irq,
 	.timer		= &rut1xx_timer,
diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c
index 88cc422..a367880 100644
--- a/arch/arm/mach-gemini/board-wbd111.c
+++ b/arch/arm/mach-gemini/board-wbd111.c
@@ -129,7 +129,7 @@ static void __init wbd111_init(void)
 }
 
 MACHINE_START(WBD111, "Wiliboard WBD-111")
-	.boot_params	= 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= gemini_map_io,
 	.init_irq	= gemini_init_irq,
 	.timer		= &wbd111_timer,
diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c
index 3a22034..f382811 100644
--- a/arch/arm/mach-gemini/board-wbd222.c
+++ b/arch/arm/mach-gemini/board-wbd222.c
@@ -129,7 +129,7 @@ static void __init wbd222_init(void)
 }
 
 MACHINE_START(WBD222, "Wiliboard WBD-222")
-	.boot_params	= 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= gemini_map_io,
 	.init_irq	= gemini_init_irq,
 	.timer		= &wbd222_timer,
-- 
1.7.4

[PATCH 11/52] ARM: mach-h720x: convert boot_params to atag_offset

[Nicolas Pitre]

The value used for boot_params in h7201-eval.c is nonsensical, given that
PLAT_PHYS_OFFSET is defined to 0x40000000.  Left unchanged to purposely
break the build to get its maintainer's attention.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-h720x/h7202-eval.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index 884584a..284a134 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -71,7 +71,7 @@ static void __init init_eval_h7202(void)
 
 MACHINE_START(H7202, "Hynix HMS30C7202")
 	/* Maintainer: Robert Schwebel, Pengutronix */
-	.boot_params	= 0x40000100,
+	.atag_offset	= 0x100,
 	.map_io		= h720x_map_io,
 	.init_irq	= h7202_init_irq,
 	.timer		= &h7202_timer,
-- 
1.7.4

[PATCH 12/52] ARM: mach-imx: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-imx/mach-armadillo5x0.c       |    2 +-
 arch/arm/mach-imx/mach-cpuimx27.c           |    2 +-
 arch/arm/mach-imx/mach-cpuimx35.c           |    2 +-
 arch/arm/mach-imx/mach-eukrea_cpuimx25.c    |    2 +-
 arch/arm/mach-imx/mach-imx27_visstrim_m10.c |    2 +-
 arch/arm/mach-imx/mach-imx27ipcam.c         |    2 +-
 arch/arm/mach-imx/mach-imx27lite.c          |    2 +-
 arch/arm/mach-imx/mach-kzm_arm11_01.c       |    2 +-
 arch/arm/mach-imx/mach-mx1ads.c             |    4 ++--
 arch/arm/mach-imx/mach-mx21ads.c            |    2 +-
 arch/arm/mach-imx/mach-mx25_3ds.c           |    2 +-
 arch/arm/mach-imx/mach-mx27_3ds.c           |    2 +-
 arch/arm/mach-imx/mach-mx27ads.c            |    2 +-
 arch/arm/mach-imx/mach-mx31_3ds.c           |    2 +-
 arch/arm/mach-imx/mach-mx31ads.c            |    2 +-
 arch/arm/mach-imx/mach-mx31lilly.c          |    2 +-
 arch/arm/mach-imx/mach-mx31lite.c           |    2 +-
 arch/arm/mach-imx/mach-mx31moboard.c        |    2 +-
 arch/arm/mach-imx/mach-mx35_3ds.c           |    2 +-
 arch/arm/mach-imx/mach-mxt_td60.c           |    2 +-
 arch/arm/mach-imx/mach-pca100.c             |    2 +-
 arch/arm/mach-imx/mach-pcm037.c             |    2 +-
 arch/arm/mach-imx/mach-pcm038.c             |    2 +-
 arch/arm/mach-imx/mach-pcm043.c             |    2 +-
 arch/arm/mach-imx/mach-qong.c               |    2 +-
 arch/arm/mach-imx/mach-scb9328.c            |    2 +-
 26 files changed, 27 insertions(+), 27 deletions(-)

diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index ffb40ff..a67c9a9 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -556,7 +556,7 @@ static struct sys_timer armadillo5x0_timer = {
 
 MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	/* Maintainer: Alberto Panizzo  */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 46a2e41..75e27d6 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -309,7 +309,7 @@ static struct sys_timer eukrea_cpuimx27_timer = {
 };
 
 MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
-	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 3f8ef82..96c950e 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -192,7 +192,7 @@ struct sys_timer eukrea_cpuimx35_timer = {
 
 MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35")
 	/* Maintainer: Eukrea Electromatique */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx35_map_io,
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 148cff2..f79dc99 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -161,7 +161,7 @@ static struct sys_timer eukrea_cpuimx25_timer = {
 
 MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25")
 	/* Maintainer: Eukrea Electromatique */
-	.boot_params = MX25_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx25_map_io,
 	.init_early = imx25_init_early,
 	.init_irq = mx25_init_irq,
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 7ae43b1..dacc261 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -260,7 +260,7 @@ static struct sys_timer visstrim_m10_timer = {
 };
 
 MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
-	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index 9be6cd6..d350497 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -69,7 +69,7 @@ static struct sys_timer mx27ipcam_timer = {
 
 MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index 8411405..e4a44fd 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -75,7 +75,7 @@ static struct sys_timer mx27lite_timer = {
 };
 
 MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
-	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 1ecae20..eaae2a3 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -269,7 +269,7 @@ static struct sys_timer kzm_timer = {
 };
 
 MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = kzm_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 38ec5cb..6c10391 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -143,7 +143,7 @@ struct sys_timer mx1ads_timer = {
 
 MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	/* Maintainer: Sascha Hauer, Pengutronix */
-	.boot_params = MX1_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx1_map_io,
 	.init_early = imx1_init_early,
 	.init_irq = mx1_init_irq,
@@ -152,7 +152,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 MACHINE_END
 
 MACHINE_START(MXLADS, "Freescale MXLADS")
-	.boot_params = MX1_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx1_map_io,
 	.init_early = imx1_init_early,
 	.init_irq = mx1_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 74ac889..bbae21d 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -303,7 +303,7 @@ static struct sys_timer mx21ads_timer = {
 
 MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = MX21_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx21ads_map_io,
 	.init_early = imx21_init_early,
 	.init_irq = mx21_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index 58ea3fd..3e584cb 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -249,7 +249,7 @@ static struct sys_timer mx25pdk_timer = {
 
 MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = MX25_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx25_map_io,
 	.init_early = imx25_init_early,
 	.init_irq = mx25_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 6e1accf..96ae14f 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -308,7 +308,7 @@ static struct sys_timer mx27pdk_timer = {
 
 MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 1db7950..cf9ef52 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -343,7 +343,7 @@ static void __init mx27ads_map_io(void)
 
 MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx27ads_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index 9b98244..8b0e770 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -761,7 +761,7 @@ static void __init mx31_3ds_reserve(void)
 
 MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index f4dee02..f87a598 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -533,7 +533,7 @@ static struct sys_timer mx31ads_timer = {
 
 MACHINE_START(MX31ADS, "Freescale MX31ADS")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx31ads_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31ads_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 410e676..9baad65 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -293,7 +293,7 @@ static struct sys_timer mx31lilly_timer = {
 };
 
 MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index ac9b4ca..efa990a 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -278,7 +278,7 @@ struct sys_timer mx31lite_timer = {
 
 MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx31lite_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index eaa51e4..d6bcdea 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -573,7 +573,7 @@ static void __init mx31moboard_reserve(void)
 
 MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	/* Maintainer: Valentin Longchamp, EPFL Mobots group */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.reserve = mx31moboard_reserve,
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 882880a..5784550 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -215,7 +215,7 @@ struct sys_timer mx35pdk_timer = {
 
 MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	/* Maintainer: Freescale Semiconductor, Inc */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx35_map_io,
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index 2774541..bcffca4 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -265,7 +265,7 @@ static struct sys_timer mxt_td60_timer = {
 
 MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
 	/* maintainer: Maxtrack Industrial */
-	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index bbddc5a..3478a92 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -433,7 +433,7 @@ static struct sys_timer pca100_timer = {
 };
 
 MACHINE_START(PCA100, "phyCARD-i.MX27")
-	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 89c213b..b14b2dd 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -686,7 +686,7 @@ static void __init pcm037_reserve(void)
 
 MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	/* Maintainer: Pengutronix */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.reserve = pcm037_reserve,
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 853bb87..8c9cca3 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -347,7 +347,7 @@ static struct sys_timer pcm038_timer = {
 };
 
 MACHINE_START(PCM038, "phyCORE-i.MX27")
-	.boot_params = MX27_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,
 	.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 0264416..041c08d 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -414,7 +414,7 @@ struct sys_timer pcm043_timer = {
 
 MACHINE_START(PCM043, "Phytec Phycore pcm043")
 	/* Maintainer: Pengutronix */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx35_map_io,
 	.init_early = imx35_init_early,
 	.init_irq = mx35_init_irq,
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index c163287..a58a837 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -260,7 +260,7 @@ static struct sys_timer qong_timer = {
 
 MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	/* Maintainer: DENX Software Engineering GmbH */
-	.boot_params = MX3x_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx31_map_io,
 	.init_early = imx31_init_early,
 	.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index dcaee04..1d7532e 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -146,7 +146,7 @@ static struct sys_timer scb9328_timer = {
 
 MACHINE_START(SCB9328, "Synertronixx scb9328")
 	/* Sascha Hauer */
-	.boot_params = 0x08000100,
+	.atag_offset = 100,
 	.map_io = mx1_map_io,
 	.init_early = imx1_init_early,
 	.init_irq = mx1_init_irq,
-- 
1.7.4

[PATCH 13/52] ARM: mach-integrator: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-integrator/integrator_ap.c |    2 +-
 arch/arm/mach-integrator/integrator_cp.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 2fbbdd5..eaa95bd 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -457,7 +457,7 @@ static struct sys_timer ap_timer = {
 
 MACHINE_START(INTEGRATOR, "ARM-Integrator")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.reserve	= integrator_reserve,
 	.map_io		= ap_map_io,
 	.init_early	= integrator_init_early,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 4eb03ab..5de49c3 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -492,7 +492,7 @@ static struct sys_timer cp_timer = {
 
 MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.reserve	= integrator_reserve,
 	.map_io		= intcp_map_io,
 	.init_early	= intcp_init_early,
-- 
1.7.4

[PATCH 14/52] ARM: mach-iop13xx: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-iop13xx/iq81340mc.c |    2 +-
 arch/arm/mach-iop13xx/iq81340sc.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 9b5a63f5..5e99e92 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -91,7 +91,7 @@ static struct sys_timer iq81340mc_timer = {
 
 MACHINE_START(IQ81340MC, "Intel IQ81340MC")
 	/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
-	.boot_params    = 0x00000100,
+	.atag_offset    = 0x100,
 	.map_io         = iop13xx_map_io,
 	.init_irq       = iop13xx_init_irq,
 	.timer          = &iq81340mc_timer,
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index df3492a..cd9e274 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -93,7 +93,7 @@ static struct sys_timer iq81340sc_timer = {
 
 MACHINE_START(IQ81340SC, "Intel IQ81340SC")
 	/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
-	.boot_params    = 0x00000100,
+	.atag_offset    = 0x100,
 	.map_io         = iop13xx_map_io,
 	.init_irq       = iop13xx_init_irq,
 	.timer          = &iq81340sc_timer,
-- 
1.7.4

[PATCH 15/52] ARM: mach-iop32x: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-iop32x/em7210.c   |    2 +-
 arch/arm/mach-iop32x/glantank.c |    2 +-
 arch/arm/mach-iop32x/iq31244.c  |    4 ++--
 arch/arm/mach-iop32x/iq80321.c  |    2 +-
 arch/arm/mach-iop32x/n2100.c    |    2 +-
 5 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 779f924..4fb35c3 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -203,7 +203,7 @@ static void __init em7210_init_machine(void)
 }
 
 MACHINE_START(EM7210, "Lanner EM7210")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= em7210_map_io,
 	.init_irq	= iop32x_init_irq,
 	.timer		= &em7210_timer,
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index c6b6f9c..c6d6426f 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -207,7 +207,7 @@ static void __init glantank_init_machine(void)
 
 MACHINE_START(GLANTANK, "GLAN Tank")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= glantank_map_io,
 	.init_irq	= iop32x_init_irq,
 	.timer		= &glantank_timer,
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index fde962c..787e96a 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -313,7 +313,7 @@ __setup("force_ep80219", force_ep80219_setup);
 
 MACHINE_START(IQ31244, "Intel IQ31244")
 	/* Maintainer: Intel Corp. */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= iq31244_map_io,
 	.init_irq	= iop32x_init_irq,
 	.timer		= &iq31244_timer,
@@ -327,7 +327,7 @@ MACHINE_END
  */
 MACHINE_START(EP80219, "Intel EP80219")
 	/* Maintainer: Intel Corp. */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= iq31244_map_io,
 	.init_irq	= iop32x_init_irq,
 	.timer		= &iq31244_timer,
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 3a95950e..cf57896 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -186,7 +186,7 @@ static void __init iq80321_init_machine(void)
 
 MACHINE_START(IQ80321, "Intel IQ80321")
 	/* Maintainer: Intel Corp. */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= iq80321_map_io,
 	.init_irq	= iop32x_init_irq,
 	.timer		= &iq80321_timer,
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 626aa37..2683a14 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -327,7 +327,7 @@ static void __init n2100_init_machine(void)
 
 MACHINE_START(N2100, "Thecus N2100")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= n2100_map_io,
 	.init_irq	= iop32x_init_irq,
 	.timer		= &n2100_timer,
-- 
1.7.4

[PATCH 16/52] ARM: mach-iop33x: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-iop33x/iq80331.c |    2 +-
 arch/arm/mach-iop33x/iq80332.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index c565f8d..2ef2e37 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -141,7 +141,7 @@ static void __init iq80331_init_machine(void)
 
 MACHINE_START(IQ80331, "Intel IQ80331")
 	/* Maintainer: Intel Corp. */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= iop3xx_map_io,
 	.init_irq	= iop33x_init_irq,
 	.timer		= &iq80331_timer,
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 36a9efb..56838b5 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -141,7 +141,7 @@ static void __init iq80332_init_machine(void)
 
 MACHINE_START(IQ80332, "Intel IQ80332")
 	/* Maintainer: Intel Corp. */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= iop3xx_map_io,
 	.init_irq	= iop33x_init_irq,
 	.timer		= &iq80332_timer,
-- 
1.7.4

[PATCH 17/52] ARM: mach-ixp2000: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-ixp2000/enp2611.c  |    2 +-
 arch/arm/mach-ixp2000/ixdp2400.c |    2 +-
 arch/arm/mach-ixp2000/ixdp2800.c |    2 +-
 arch/arm/mach-ixp2000/ixdp2x01.c |    6 +++---
 4 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 88663ab..6e843d97 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -253,7 +253,7 @@ static void __init enp2611_init_machine(void)
 
 MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= enp2611_map_io,
 	.init_irq	= ixp2000_init_irq,
 	.timer		= &enp2611_timer,
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index dfffc1e..62fea84 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -170,7 +170,7 @@ void __init ixdp2400_init_irq(void)
 
 MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= ixdp2x00_map_io,
 	.init_irq	= ixdp2400_init_irq,
 	.timer		= &ixdp2400_timer,
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index cd4c9bc..ae73e73 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -285,7 +285,7 @@ void __init ixdp2800_init_irq(void)
 
 MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= ixdp2x00_map_io,
 	.init_irq	= ixdp2800_init_irq,
 	.timer		= &ixdp2800_timer,
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 84835b2..12b6e08 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -416,7 +416,7 @@ static void __init ixdp2x01_init_machine(void)
 #ifdef CONFIG_ARCH_IXDP2401
 MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= ixdp2x01_map_io,
 	.init_irq	= ixdp2x01_init_irq,
 	.timer		= &ixdp2x01_timer,
@@ -427,7 +427,7 @@ MACHINE_END
 #ifdef CONFIG_ARCH_IXDP2801
 MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= ixdp2x01_map_io,
 	.init_irq	= ixdp2x01_init_irq,
 	.timer		= &ixdp2x01_timer,
@@ -440,7 +440,7 @@ MACHINE_END
  */
 MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= ixdp2x01_map_io,
 	.init_irq	= ixdp2x01_init_irq,
 	.timer		= &ixdp2x01_timer,
-- 
1.7.4

[PATCH 18/52] ARM: mach-ixp23xx: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-ixp23xx/espresso.c   |    2 +-
 arch/arm/mach-ixp23xx/ixdp2351.c   |    2 +-
 arch/arm/mach-ixp23xx/roadrunner.c |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index e25e5fe..30dd316 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -88,6 +88,6 @@ MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso")
 	.map_io		= ixp23xx_map_io,
 	.init_irq	= ixp23xx_init_irq,
 	.timer		= &ixp23xx_timer,
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= espresso_init,
 MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index 8dcba17..566f56f 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -331,6 +331,6 @@ MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform")
 	.map_io		= ixdp2351_map_io,
 	.init_irq	= ixdp2351_init_irq,
 	.timer		= &ixp23xx_timer,
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= ixdp2351_init,
 MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index 8fe0c62..611fdbc 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -174,6 +174,6 @@ MACHINE_START(ROADRUNNER, "ADI Engineering RoadRunner Development Platform")
 	.map_io		= ixp23xx_map_io,
 	.init_irq	= ixp23xx_init_irq,
 	.timer		= &ixp23xx_timer,
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= roadrunner_init,
 MACHINE_END
-- 
1.7.4

[PATCH 19/52] ARM: mach-ixp4xx: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-ixp4xx/avila-setup.c       |    4 ++--
 arch/arm/mach-ixp4xx/coyote-setup.c      |    4 ++--
 arch/arm/mach-ixp4xx/dsmg600-setup.c     |    2 +-
 arch/arm/mach-ixp4xx/fsg-setup.c         |    2 +-
 arch/arm/mach-ixp4xx/gateway7001-setup.c |    2 +-
 arch/arm/mach-ixp4xx/goramo_mlr.c        |    2 +-
 arch/arm/mach-ixp4xx/gtwx5715-setup.c    |    2 +-
 arch/arm/mach-ixp4xx/ixdp425-setup.c     |    8 ++++----
 arch/arm/mach-ixp4xx/nas100d-setup.c     |    2 +-
 arch/arm/mach-ixp4xx/nslu2-setup.c       |    2 +-
 arch/arm/mach-ixp4xx/vulcan-setup.c      |    2 +-
 arch/arm/mach-ixp4xx/wg302v2-setup.c     |    2 +-
 12 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 05bf40d..8133f24 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -167,7 +167,7 @@ MACHINE_START(AVILA, "Gateworks Avila Network Platform")
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= avila_init,
 #if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
 	.dma_zone_size	= SZ_64M,
@@ -185,7 +185,7 @@ MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= avila_init,
 #if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
 	.dma_zone_size	= SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 0adf01b..b1d9ef0 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -112,7 +112,7 @@ MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= coyote_init,
 #if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
 	.dma_zone_size	= SZ_64M,
@@ -130,7 +130,7 @@ MACHINE_START(IXDPG425, "Intel IXDPG425")
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= coyote_init,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 3eb8861..d927e11 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -279,7 +279,7 @@ static void __init dsmg600_init(void)
 
 MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
 	/* Maintainer: www.nslu2-linux.org */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer          = &dsmg600_timer,
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index d26bd4b..65544d3 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -273,7 +273,7 @@ MACHINE_START(FSG, "Freecom FSG-3")
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= fsg_init,
 #if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
 	.dma_zone_size	= SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index 85e179e..27849d4 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -99,7 +99,7 @@ MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= gateway7001_init,
 #if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
 	.dma_zone_size	= SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index 34955e8..5a85b0f 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -499,7 +499,7 @@ MACHINE_START(GORAMO_MLR, "MultiLink")
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= gmlr_init,
 #if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
 	.dma_zone_size	= SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 283e128..92dfa7e 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -167,7 +167,7 @@ MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)")
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= gtwx5715_init,
 #if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
 	.dma_zone_size	= SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index d89e11f..5454b66 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -256,7 +256,7 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= ixdp425_init,
 #if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
 	.dma_zone_size	= SZ_64M,
@@ -270,7 +270,7 @@ MACHINE_START(IXDP465, "Intel IXDP465 Development Platform")
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= ixdp425_init,
 #if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
 	.dma_zone_size	= SZ_64M,
@@ -284,7 +284,7 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= ixdp425_init,
 #if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
 	.dma_zone_size	= SZ_64M,
@@ -298,7 +298,7 @@ MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform")
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= ixdp425_init,
 #if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
 	.dma_zone_size	= SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 5cb107b..be70a49 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -314,7 +314,7 @@ static void __init nas100d_init(void)
 
 MACHINE_START(NAS100D, "Iomega NAS 100d")
 	/* Maintainer: www.nslu2-linux.org */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer          = &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 446375d..12a5949 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -300,7 +300,7 @@ static void __init nslu2_init(void)
 
 MACHINE_START(NSLU2, "Linksys NSLU2")
 	/* Maintainer: www.nslu2-linux.org */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer          = &nslu2_timer,
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 4a2d4e7..b9aa133 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -239,7 +239,7 @@ MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan")
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= vulcan_init,
 #if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
 	.dma_zone_size	= SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index 5397237..fcd04f8 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -100,7 +100,7 @@ MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
 	.map_io		= ixp4xx_map_io,
 	.init_irq	= ixp4xx_init_irq,
 	.timer		= &ixp4xx_timer,
-	.boot_params	= 0x0100,
+	.atag_offset	= 0x100,
 	.init_machine	= wg302v2_init,
 #if defined(config_PCI) && !defined(CONFIG_IXP4XX_INDIRECT_PCI)
 	.dma_zone_size	= SZ_64M,
-- 
1.7.4

[PATCH 20/52] ARM: mach-kirkwood: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-kirkwood/d2net_v2-setup.c        |    2 +-
 arch/arm/mach-kirkwood/db88f6281-bp-setup.c    |    2 +-
 arch/arm/mach-kirkwood/dockstar-setup.c        |    2 +-
 arch/arm/mach-kirkwood/guruplug-setup.c        |    2 +-
 arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c |    2 +-
 arch/arm/mach-kirkwood/netspace_v2-setup.c     |    6 +++---
 arch/arm/mach-kirkwood/netxbig_v2-setup.c      |    4 ++--
 arch/arm/mach-kirkwood/openrd-setup.c          |    6 +++---
 arch/arm/mach-kirkwood/rd88f6192-nas-setup.c   |    2 +-
 arch/arm/mach-kirkwood/rd88f6281-setup.c       |    2 +-
 arch/arm/mach-kirkwood/sheevaplug-setup.c      |    4 ++--
 arch/arm/mach-kirkwood/t5325-setup.c           |    2 +-
 arch/arm/mach-kirkwood/ts219-setup.c           |    2 +-
 arch/arm/mach-kirkwood/ts41x-setup.c           |    2 +-
 14 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index 043cfd5..f457e07 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -221,7 +221,7 @@ static void __init d2net_v2_init(void)
 }
 
 MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= d2net_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index bff04e0..ff4c21c 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -97,7 +97,7 @@ subsys_initcall(db88f6281_pci_init);
 
 MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
 	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= db88f6281_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index f14dfb8..e4d199b 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -102,7 +102,7 @@ static void __init dockstar_init(void)
 }
 
 MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= dockstar_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index 41d1b40..6c40f78 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -121,7 +121,7 @@ static void __init guruplug_init(void)
 
 MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
 	/* Maintainer: Siddarth Gore <gores@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= guruplug_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 00cca22..9a1e917 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -163,7 +163,7 @@ subsys_initcall(mv88f6281gtw_ge_pci_init);
 
 MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= mv88f6281gtw_ge_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 7cdab57..8849bcc 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -258,7 +258,7 @@ static void __init netspace_v2_init(void)
 
 #ifdef CONFIG_MACH_NETSPACE_V2
 MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
@@ -269,7 +269,7 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_INETSPACE_V2
 MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
@@ -280,7 +280,7 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_NETSPACE_MAX_V2
 MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 6be627d..1ba12c4 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -399,7 +399,7 @@ static void __init netxbig_v2_init(void)
 
 #ifdef CONFIG_MACH_NET2BIG_V2
 MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= netxbig_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
@@ -410,7 +410,7 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_NET5BIG_V2
 MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= netxbig_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index f69beef..5660ca6 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -214,7 +214,7 @@ subsys_initcall(openrd_pci_init);
 #ifdef CONFIG_MACH_OPENRD_BASE
 MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
 	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= openrd_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
@@ -226,7 +226,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_OPENRD_CLIENT
 MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
 	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= openrd_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
@@ -238,7 +238,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_OPENRD_ULTIMATE
 MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
 	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= openrd_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 75c6601..6663869 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -79,7 +79,7 @@ subsys_initcall(rd88f6192_pci_init);
 
 MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
 	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= rd88f6192_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 0f75494..66b3c05 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -115,7 +115,7 @@ subsys_initcall(rd88f6281_pci_init);
 
 MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
 	/* Maintainer: Saeed Bishara <saeed@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= rd88f6281_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 17de0bf..8b102d6 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -138,7 +138,7 @@ static void __init sheevaplug_init(void)
 #ifdef CONFIG_MACH_SHEEVAPLUG
 MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
 	/* Maintainer: shadi Ammouri <shadi@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= sheevaplug_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
@@ -149,7 +149,7 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
 MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= sheevaplug_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index e6b9b1b..ea104fb 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -201,7 +201,7 @@ subsys_initcall(hp_t5325_pci_init);
 
 MACHINE_START(T5325, "HP t5325 Thin Client")
 	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= hp_t5325_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 68f32f2..262c034 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -132,7 +132,7 @@ subsys_initcall(ts219_pci_init);
 
 MACHINE_START(TS219, "QNAP TS-119/TS-219")
 	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= qnap_ts219_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index d5d0099..b68f5b4 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -176,7 +176,7 @@ subsys_initcall(ts41x_pci_init);
 
 MACHINE_START(TS41X, "QNAP TS-41x")
 	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= qnap_ts41x_init,
 	.map_io		= kirkwood_map_io,
 	.init_early	= kirkwood_init_early,
-- 
1.7.4

[PATCH 21/52] ARM: mach-ks8695: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-ks8695/board-acs5k.c  |    2 +-
 arch/arm/mach-ks8695/board-dsm320.c |    2 +-
 arch/arm/mach-ks8695/board-micrel.c |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index 3ca4f8e..a5fcc7c 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -223,7 +223,7 @@ static void __init acs5k_init(void)
 
 MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board")
 	/* Maintainer: Simtec Electronics. */
-	.boot_params	= KS8695_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
 	.init_machine	= acs5k_init,
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
index ada92b6..197f67b 100644
--- a/arch/arm/mach-ks8695/board-dsm320.c
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -121,7 +121,7 @@ static void __init dsm320_init(void)
 
 MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player")
 	/* Maintainer: Simtec Electronics. */
-	.boot_params	= KS8695_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
 	.init_machine	= dsm320_init,
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index c7ad09b..cdd309a 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -53,7 +53,7 @@ static void __init micrel_init(void)
 
 MACHINE_START(KS8695, "KS8695 Centaur Development Board")
 	/* Maintainer: Micrel Semiconductor Inc. */
-	.boot_params	= KS8695_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= ks8695_map_io,
 	.init_irq	= ks8695_init_irq,
 	.init_machine	= micrel_init,
-- 
1.7.4

[PATCH 22/52] ARM: mach-loki: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-loki/lb88rc8480-setup.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-loki/lb88rc8480-setup.c b/arch/arm/mach-loki/lb88rc8480-setup.c
index 35eae4e..cd4fa76 100644
--- a/arch/arm/mach-loki/lb88rc8480-setup.c
+++ b/arch/arm/mach-loki/lb88rc8480-setup.c
@@ -90,7 +90,7 @@ static void __init lb88rc8480_init(void)
 
 MACHINE_START(LB88RC8480, "Marvell LB88RC8480 Development Board")
 	/* Maintainer: Ke Wei <kewei@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= lb88rc8480_init,
 	.map_io		= loki_map_io,
 	.init_early	= loki_init_early,
-- 
1.7.4

[PATCH 23/52] ARM: mach-lpc32xx: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-lpc32xx/phy3250.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 7993b09..9b621e1 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -382,7 +382,7 @@ arch_initcall(lpc32xx_display_uid);
 
 MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller")
 	/* Maintainer: Kevin Wells, NXP Semiconductors */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.map_io		= lpc32xx_map_io,
 	.init_irq	= lpc32xx_init_irq,
 	.timer		= &lpc32xx_timer,
-- 
1.7.4

[PATCH 24/52] ARM: mach-msm: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-msm/board-halibut.c  |    2 +-
 arch/arm/mach-msm/board-mahimahi.c |    2 +-
 arch/arm/mach-msm/board-msm7x27.c  |    8 ++++----
 arch/arm/mach-msm/board-msm7x30.c  |    6 +++---
 arch/arm/mach-msm/board-qsd8x50.c  |    4 ++--
 arch/arm/mach-msm/board-sapphire.c |    2 +-
 arch/arm/mach-msm/board-trout.c    |    2 +-
 7 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 18a3c97..16c86f8 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -93,7 +93,7 @@ static void __init halibut_map_io(void)
 }
 
 MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.fixup		= halibut_fixup,
 	.map_io		= halibut_map_io,
 	.init_irq	= halibut_init_irq,
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
index 7a9a03e..8a1672e 100644
--- a/arch/arm/mach-msm/board-mahimahi.c
+++ b/arch/arm/mach-msm/board-mahimahi.c
@@ -74,7 +74,7 @@ static void __init mahimahi_map_io(void)
 extern struct sys_timer msm_timer;
 
 MACHINE_START(MAHIMAHI, "mahimahi")
-	.boot_params	= 0x20000100,
+	.atag_offset	= 0x100,
 	.fixup		= mahimahi_fixup,
 	.map_io		= mahimahi_map_io,
 	.init_irq	= msm_init_irq,
diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
index c03f269..a807655 100644
--- a/arch/arm/mach-msm/board-msm7x27.c
+++ b/arch/arm/mach-msm/board-msm7x27.c
@@ -130,7 +130,7 @@ static void __init msm7x2x_map_io(void)
 }
 
 MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
-	.boot_params	= PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
@@ -138,7 +138,7 @@ MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
 MACHINE_END
 
 MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
-	.boot_params	= PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
@@ -146,7 +146,7 @@ MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
 MACHINE_END
 
 MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
-	.boot_params	= PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
@@ -154,7 +154,7 @@ MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
 MACHINE_END
 
 MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
-	.boot_params	= PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= msm7x2x_map_io,
 	.init_irq	= msm7x2x_init_irq,
 	.init_machine	= msm7x2x_init,
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index b7a8496..5a2ab68 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -106,7 +106,7 @@ static void __init msm7x30_map_io(void)
 }
 
 MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
-	.boot_params = PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = msm7x30_map_io,
 	.init_irq = msm7x30_init_irq,
 	.init_machine = msm7x30_init,
@@ -114,7 +114,7 @@ MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
 MACHINE_END
 
 MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
-	.boot_params = PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = msm7x30_map_io,
 	.init_irq = msm7x30_init_irq,
 	.init_machine = msm7x30_init,
@@ -122,7 +122,7 @@ MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
 MACHINE_END
 
 MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
-	.boot_params = PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = msm7x30_map_io,
 	.init_irq = msm7x30_init_irq,
 	.init_machine = msm7x30_init,
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 6a96911..51109b1 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -193,7 +193,7 @@ static void __init qsd8x50_init(void)
 }
 
 MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
-	.boot_params = PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = qsd8x50_map_io,
 	.init_irq = qsd8x50_init_irq,
 	.init_machine = qsd8x50_init,
@@ -201,7 +201,7 @@ MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
 MACHINE_END
 
 MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
-	.boot_params = PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = qsd8x50_map_io,
 	.init_irq = qsd8x50_init_irq,
 	.init_machine = qsd8x50_init,
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 68f930f..dc0bcb5 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -105,7 +105,7 @@ static void __init sapphire_map_io(void)
 
 MACHINE_START(SAPPHIRE, "sapphire")
 /* Maintainer: Brian Swetland <swetland@google.com> */
-	.boot_params    = PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset    = 0x100,
 	.fixup          = sapphire_fixup,
 	.map_io         = sapphire_map_io,
 	.init_irq       = sapphire_init_irq,
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index 8143867..22d5694 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -93,7 +93,7 @@ static void __init trout_map_io(void)
 }
 
 MACHINE_START(TROUT, "HTC Dream")
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.fixup		= trout_fixup,
 	.map_io		= trout_map_io,
 	.init_irq	= trout_init_irq,
-- 
1.7.4

[PATCH 25/52] ARM: mach-mv78xx0: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-mv78xx0/buffalo-wxl-setup.c  |    2 +-
 arch/arm/mach-mv78xx0/db78x00-bp-setup.c   |    2 +-
 arch/arm/mach-mv78xx0/rd78x00-masa-setup.c |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index 20f3f12..0e94268 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -145,7 +145,7 @@ subsys_initcall(wxl_pci_init);
 
 MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
 	/* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= wxl_init,
 	.map_io		= mv78xx0_map_io,
 	.init_early	= mv78xx0_init_early,
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index df5aebe..50b85ae 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -93,7 +93,7 @@ subsys_initcall(db78x00_pci_init);
 
 MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= db78x00_init,
 	.map_io		= mv78xx0_map_io,
 	.init_early	= mv78xx0_init_early,
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
index d927f14..e85222e 100644
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -78,7 +78,7 @@ subsys_initcall(rd78x00_pci_init);
 
 MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= rd78x00_masa_init,
 	.map_io		= mv78xx0_map_io,
 	.init_early	= mv78xx0_init_early,
-- 
1.7.4

[PATCH 26/52] ARM: mach-mx5: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-mx5/board-cpuimx51.c     |    2 +-
 arch/arm/mach-mx5/board-cpuimx51sd.c   |    2 +-
 arch/arm/mach-mx5/board-mx51_3ds.c     |    2 +-
 arch/arm/mach-mx5/board-mx51_babbage.c |    2 +-
 arch/arm/mach-mx5/board-mx51_efikamx.c |    2 +-
 arch/arm/mach-mx5/board-mx51_efikasb.c |    2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 4efa02e..6621ecf 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -295,7 +295,7 @@ static struct sys_timer mxc_timer = {
 
 MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
 	/* Maintainer: Eric B?nard <eric@eukrea.com> */
-	.boot_params = MX51_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index 5ef25a5..92945ca 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -329,7 +329,7 @@ static struct sys_timer mxc_timer = {
 
 MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
 	/* Maintainer: Eric B?nard <eric@eukrea.com> */
-	.boot_params = MX51_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 63dfbea..1a6b925 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -166,7 +166,7 @@ static struct sys_timer mx51_3ds_timer = {
 
 MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = MX51_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index c7b3fab..b055b61 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -394,7 +394,7 @@ static struct sys_timer mx51_babbage_timer = {
 
 MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
 	/* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
-	.boot_params = MX51_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index 6e36231..a262e77 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -285,7 +285,7 @@ static struct sys_timer mx51_efikamx_timer = {
 
 MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
 	/* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */
-	.boot_params = MX51_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 474fc6e..e794d41 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -271,7 +271,7 @@ static struct sys_timer mx51_efikasb_timer = {
 };
 
 MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
-	.boot_params = MX51_PHYS_OFFSET + 0x100,
+	.atag_offset = 0x100,
 	.map_io = mx51_map_io,
 	.init_early = imx51_init_early,
 	.init_irq = mx51_init_irq,
-- 
1.7.4

[PATCH 27/52] ARM: mach-netx: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-netx/nxdb500.c    |    2 +-
 arch/arm/mach-netx/nxdkn.c      |    2 +-
 arch/arm/mach-netx/nxeb500hmi.c |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index ca8b203..90903dd 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -200,7 +200,7 @@ static void __init nxdb500_init(void)
 }
 
 MACHINE_START(NXDB500, "Hilscher nxdb500")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
 	.timer		= &netx_timer,
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index d775cbe..c63384a 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -93,7 +93,7 @@ static void __init nxdkn_init(void)
 }
 
 MACHINE_START(NXDKN, "Hilscher nxdkn")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
 	.timer		= &netx_timer,
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index de369cd..8f548ec 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -177,7 +177,7 @@ static void __init nxeb500hmi_init(void)
 }
 
 MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.map_io		= netx_map_io,
 	.init_irq	= netx_init_irq,
 	.timer		= &netx_timer,
-- 
1.7.4

[PATCH 28/52] ARM: mach-nomadik: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-nomadik/board-nhk8815.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 1399303..398a75f 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -276,7 +276,7 @@ static void __init nhk8815_platform_init(void)
 
 MACHINE_START(NOMADIK, "NHK8815")
 	/* Maintainer: ST MicroElectronics */
-	.boot_params	= 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= cpu8815_map_io,
 	.init_irq	= cpu8815_init_irq,
 	.timer		= &nomadik_timer,
-- 
1.7.4

[PATCH 29/52] ARM: mach-nuc93x: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-nuc93x/mach-nuc932evb.c |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-nuc93x/mach-nuc932evb.c b/arch/arm/mach-nuc93x/mach-nuc932evb.c
index d702570..1f741b1 100644
--- a/arch/arm/mach-nuc93x/mach-nuc932evb.c
+++ b/arch/arm/mach-nuc93x/mach-nuc932evb.c
@@ -35,7 +35,6 @@ static void __init nuc932evb_init(void)
 
 MACHINE_START(NUC932EVB, "NUC932EVB")
 	/* Maintainer: Wan ZongShun */
-	.boot_params	= 0,
 	.map_io		= nuc932evb_map_io,
 	.init_irq	= nuc93x_init_irq,
 	.init_machine	= nuc932evb_init,
-- 
1.7.4

[PATCH 30/52] ARM: mach-omap1: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-omap1/board-ams-delta.c |    2 +-
 arch/arm/mach-omap1/board-fsample.c   |    2 +-
 arch/arm/mach-omap1/board-generic.c   |    2 +-
 arch/arm/mach-omap1/board-h2.c        |    2 +-
 arch/arm/mach-omap1/board-h3.c        |    2 +-
 arch/arm/mach-omap1/board-htcherald.c |    2 +-
 arch/arm/mach-omap1/board-innovator.c |    2 +-
 arch/arm/mach-omap1/board-nokia770.c  |    2 +-
 arch/arm/mach-omap1/board-osk.c       |    2 +-
 arch/arm/mach-omap1/board-palmte.c    |    2 +-
 arch/arm/mach-omap1/board-palmtt.c    |    2 +-
 arch/arm/mach-omap1/board-palmz71.c   |    2 +-
 arch/arm/mach-omap1/board-perseus2.c  |    2 +-
 arch/arm/mach-omap1/board-sx1.c       |    2 +-
 arch/arm/mach-omap1/board-voiceblue.c |    2 +-
 15 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index de88c92..e501586 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -386,7 +386,7 @@ static void __init ams_delta_map_io(void)
 
 MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	/* Maintainer: Jonathan McDowell <noodles@earth.li> */
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= ams_delta_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= ams_delta_init_irq,
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 87f173d..944709b 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -389,7 +389,7 @@ static void __init omap_fsample_map_io(void)
 
 MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
 /* Maintainer: Brian Swetland <swetland@google.com> */
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= omap_fsample_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_fsample_init_irq,
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 23f4ab9..eeb89f1 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -94,7 +94,7 @@ static void __init omap_generic_map_io(void)
 
 MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
 	/* Maintainer: Tony Lindgren <tony@atomide.com> */
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= omap_generic_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_generic_init_irq,
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index ba3bd09..90e41e8 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -461,7 +461,7 @@ static void __init h2_map_io(void)
 
 MACHINE_START(OMAP_H2, "TI-H2")
 	/* Maintainer: Imre Deak <imre.deak@nokia.com> */
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= h2_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= h2_init_irq,
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index ac48677..685d91d 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -449,7 +449,7 @@ static void __init h3_map_io(void)
 
 MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
 	/* Maintainer: Texas Instruments, Inc. */
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= h3_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= h3_init_irq,
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index ba05a51..7d923ba 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -611,7 +611,7 @@ static void __init htcherald_init_irq(void)
 MACHINE_START(HERALD, "HTC Herald")
 	/* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
 	/* Maintainer: wing-linux.sourceforge.net */
-	.boot_params    = 0x10000100,
+	.atag_offset    = 0x100,
 	.map_io         = htcherald_map_io,
 	.reserve	= omap_reserve,
 	.init_irq       = htcherald_init_irq,
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 2d9b8cb..3d505f3 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -459,7 +459,7 @@ static void __init innovator_map_io(void)
 
 MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
 	/* Maintainer: MontaVista Software, Inc. */
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= innovator_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= innovator_init_irq,
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index cfd0849..abcddd8 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -264,7 +264,7 @@ static void __init omap_nokia770_map_io(void)
 }
 
 MACHINE_START(NOKIA770, "Nokia 770")
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= omap_nokia770_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_nokia770_init_irq,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index e68dfde..319ff26 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -583,7 +583,7 @@ static void __init osk_map_io(void)
 
 MACHINE_START(OMAP_OSK, "TI-OSK")
 	/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= osk_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= osk_init_irq,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index c9d38f4..73beff9 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -275,7 +275,7 @@ static void __init omap_palmte_map_io(void)
 }
 
 MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= omap_palmte_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_palmte_init_irq,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index f04f2d3..424cec1 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -321,7 +321,7 @@ static void __init omap_palmtt_map_io(void)
 }
 
 MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= omap_palmtt_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_palmtt_init_irq,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 45f01d2..cfa8ea7 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -341,7 +341,7 @@ omap_palmz71_map_io(void)
 }
 
 MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= omap_palmz71_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_palmz71_init_irq,
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 3c8ee84..d4ec492 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -350,7 +350,7 @@ static void __init omap_perseus2_map_io(void)
 
 MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
 	/* Maintainer: Kevin Hilman <kjh@hilman.org> */
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= omap_perseus2_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_perseus2_init_irq,
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 0ad781d..c7f829b 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -421,7 +421,7 @@ static void __init omap_sx1_map_io(void)
 }
 
 MACHINE_START(SX1, "OMAP310 based Siemens SX1")
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= omap_sx1_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= omap_sx1_init_irq,
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 65d2420..a1def14 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -301,7 +301,7 @@ static void __init voiceblue_init(void)
 
 MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
 	/* Maintainer: Ladislav Michl <michl@2n.cz> */
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.map_io		= voiceblue_map_io,
 	.reserve	= omap_reserve,
 	.init_irq	= voiceblue_init_irq,
-- 
1.7.4

[PATCH 30/52] ARM: mach-omap1: convert boot_params to atag_offset

[Tony Lindgren]

* Nicolas Pitre <nicolas.pitre@linaro.org> [110706 06:15]:
> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

Acked-by: Tony Lindgren <tony@atomide.com>

[PATCH 31/52] ARM: mach-omap2: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-omap2/board-2430sdp.c        |    2 +-
 arch/arm/mach-omap2/board-3430sdp.c        |    2 +-
 arch/arm/mach-omap2/board-3630sdp.c        |    2 +-
 arch/arm/mach-omap2/board-4430sdp.c        |    2 +-
 arch/arm/mach-omap2/board-am3517crane.c    |    2 +-
 arch/arm/mach-omap2/board-am3517evm.c      |    2 +-
 arch/arm/mach-omap2/board-apollon.c        |    2 +-
 arch/arm/mach-omap2/board-cm-t35.c         |    2 +-
 arch/arm/mach-omap2/board-cm-t3517.c       |    2 +-
 arch/arm/mach-omap2/board-devkit8000.c     |    2 +-
 arch/arm/mach-omap2/board-generic.c        |    2 +-
 arch/arm/mach-omap2/board-h4.c             |    2 +-
 arch/arm/mach-omap2/board-igep0020.c       |    4 ++--
 arch/arm/mach-omap2/board-ldp.c            |    2 +-
 arch/arm/mach-omap2/board-n8x0.c           |    6 +++---
 arch/arm/mach-omap2/board-omap3beagle.c    |    2 +-
 arch/arm/mach-omap2/board-omap3evm.c       |    2 +-
 arch/arm/mach-omap2/board-omap3logic.c     |    4 ++--
 arch/arm/mach-omap2/board-omap3pandora.c   |    2 +-
 arch/arm/mach-omap2/board-omap3stalker.c   |    2 +-
 arch/arm/mach-omap2/board-omap3touchbook.c |    2 +-
 arch/arm/mach-omap2/board-omap4panda.c     |    2 +-
 arch/arm/mach-omap2/board-overo.c          |    2 +-
 arch/arm/mach-omap2/board-rm680.c          |    2 +-
 arch/arm/mach-omap2/board-rx51.c           |    2 +-
 arch/arm/mach-omap2/board-ti8168evm.c      |    2 +-
 arch/arm/mach-omap2/board-zoom.c           |    4 ++--
 27 files changed, 32 insertions(+), 32 deletions(-)

diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 5de6eac..0ffe335 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -256,7 +256,7 @@ static void __init omap_2430sdp_map_io(void)
 
 MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap_2430sdp_map_io,
 	.init_early	= omap_2430sdp_init_early,
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 5dac974..a4c89e1 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -800,7 +800,7 @@ static void __init omap_3430sdp_init(void)
 
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_3430sdp_init_early,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index a5933cc..f3c1c68 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -215,7 +215,7 @@ static void __init omap_sdp_init(void)
 }
 
 MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_sdp_init_early,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 63de2d3..b949cc0 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -767,7 +767,7 @@ static void __init omap_4430sdp_map_io(void)
 
 MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap_4430sdp_map_io,
 	.init_early	= omap_4430sdp_init_early,
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 5e438a7..d24ad37 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -100,7 +100,7 @@ static void __init am3517_crane_init(void)
 }
 
 MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= am3517_crane_init_early,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 63af417..743dbd9 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -490,7 +490,7 @@ static void __init am3517_evm_init(void)
 }
 
 MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= am3517_evm_init_early,
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index b124bdf..afd7b4f 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -350,7 +350,7 @@ static void __init omap_apollon_map_io(void)
 
 MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap_apollon_map_io,
 	.init_early	= omap_apollon_init_early,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 77456de..9909786 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -642,7 +642,7 @@ static void __init cm_t35_init(void)
 }
 
 MACHINE_START(CM_T35, "Compulab CM-T35")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= cm_t35_init_early,
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index c3a9fd3..783a46c 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -300,7 +300,7 @@ static void __init cm_t3517_init(void)
 }
 
 MACHINE_START(CM_T3517, "Compulab CM-T3517")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve        = omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= cm_t3517_init_early,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 34956ec..660ab39 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -701,7 +701,7 @@ static void __init devkit8000_init(void)
 }
 
 MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= devkit8000_init_early,
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 73e3c31..1e42820 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -66,7 +66,7 @@ static void __init omap_generic_map_io(void)
 /* XXX This machine entry name should be updated */
 MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap_generic_map_io,
 	.init_early	= omap_generic_init_early,
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index bac7933..2f5b94e 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -382,7 +382,7 @@ static void __init omap_h4_map_io(void)
 
 MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap_h4_map_io,
 	.init_early	= omap_h4_init_early,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 0c1bfca..dbdd203 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -699,7 +699,7 @@ static void __init igep_init(void)
 }
 
 MACHINE_START(IGEP0020, "IGEP v2 board")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= igep_init_early,
@@ -709,7 +709,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
 MACHINE_END
 
 MACHINE_START(IGEP0030, "IGEP OMAP3 module")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= igep_init_early,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index f7d6038..62c65fe 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -346,7 +346,7 @@ static void __init omap_ldp_init(void)
 }
 
 MACHINE_START(OMAP_LDP, "OMAP LDP board")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_ldp_init_early,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 8d74318..43bb006 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -695,7 +695,7 @@ static void __init n8x0_init_machine(void)
 }
 
 MACHINE_START(NOKIA_N800, "Nokia N800")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= n8x0_map_io,
 	.init_early	= n8x0_init_early,
@@ -705,7 +705,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
 MACHINE_END
 
 MACHINE_START(NOKIA_N810, "Nokia N810")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= n8x0_map_io,
 	.init_early	= n8x0_init_early,
@@ -715,7 +715,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
 MACHINE_END
 
 MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= n8x0_map_io,
 	.init_early	= n8x0_init_early,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 7f21d24..b0da303 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -593,7 +593,7 @@ static void __init omap3_beagle_init(void)
 
 MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3_beagle_init_early,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b4d4346..2f62db1 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -736,7 +736,7 @@ static void __init omap3_evm_init(void)
 
 MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3_evm_init_early,
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 60d9be4..95f728f 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -212,7 +212,7 @@ static void __init omap3logic_init(void)
 }
 
 MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3logic_init_early,
 	.init_irq	= omap_init_irq,
@@ -221,7 +221,7 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
 MACHINE_END
 
 MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3logic_init_early,
 	.init_irq	= omap_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 23f71d4..c072141 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -639,7 +639,7 @@ static void __init omap3pandora_init(void)
 }
 
 MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3pandora_init_early,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 0c108a2..b8fc04d 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -555,7 +555,7 @@ static void __init omap3_stalker_init(void)
 
 MACHINE_START(SBC3530, "OMAP3 STALKER")
 	/* Maintainer: Jason Lam -lzg at ema-tech.com */
-	.boot_params		= 0x80000100,
+	.atag_offset		= 0x100,
 	.map_io			= omap3_map_io,
 	.init_early		= omap3_stalker_init_early,
 	.init_irq		= omap3_stalker_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 5f649fa..324ada5 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -443,7 +443,7 @@ static void __init omap3_touchbook_init(void)
 
 MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
 	/* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap3_touchbook_init_early,
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 0cfe200..2a37784 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -710,7 +710,7 @@ static void __init omap4_panda_map_io(void)
 
 MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
 	/* Maintainer: David Anders - Texas Instruments Inc */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap4_panda_map_io,
 	.init_early	= omap4_panda_init_early,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 175e1ab..7fae10f 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -611,7 +611,7 @@ static void __init overo_init(void)
 }
 
 MACHINE_START(OVERO, "Gumstix Overo")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= overo_init_early,
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 42d10b1..b5b78b6 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -159,7 +159,7 @@ static void __init rm680_map_io(void)
 }
 
 MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= rm680_map_io,
 	.init_early	= rm680_init_early,
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index fec4cac..897f17f 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -156,7 +156,7 @@ static void __init rx51_reserve(void)
 
 MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= rx51_reserve,
 	.map_io		= rx51_map_io,
 	.init_early	= rx51_init_early,
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index 09fa7bf..76847cb 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -53,7 +53,7 @@ static void __init ti8168_evm_map_io(void)
 
 MACHINE_START(TI8168EVM, "ti8168evm")
 	/* Maintainer: Texas Instruments */
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.map_io		= ti8168_evm_map_io,
 	.init_early	= ti8168_init_early,
 	.init_irq	= ti8168_evm_init_irq,
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 4b133d7..3e35ab6 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -133,7 +133,7 @@ static void __init omap_zoom_init(void)
 }
 
 MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_zoom_init_early,
@@ -143,7 +143,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 MACHINE_END
 
 MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
-	.boot_params	= 0x80000100,
+	.atag_offset	= 0x100,
 	.reserve	= omap_reserve,
 	.map_io		= omap3_map_io,
 	.init_early	= omap_zoom_init_early,
-- 
1.7.4

[PATCH 31/52] ARM: mach-omap2: convert boot_params to atag_offset

[Tony Lindgren]

* Nicolas Pitre <nicolas.pitre@linaro.org> [110706 06:04]:
> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

Acked-by: Tony Lindgren <tony@atomide.com>

[PATCH 31/52] ARM: mach-omap2: convert boot_params to atag_offset

[Nicolas Pitre]

On Thu, 7 Jul 2011, Tony Lindgren wrote:

> * Nicolas Pitre <nicolas.pitre@linaro.org> [110706 06:04]:
> > Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
> 
> Acked-by: Tony Lindgren <tony@atomide.com>

Thanks for all the ACKs.


Nicolas

[PATCH 32/52] ARM: mach-orion5x: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-orion5x/d2net-setup.c            |    4 ++--
 arch/arm/mach-orion5x/db88f5281-setup.c        |    2 +-
 arch/arm/mach-orion5x/dns323-setup.c           |    2 +-
 arch/arm/mach-orion5x/edmini_v2-setup.c        |    2 +-
 arch/arm/mach-orion5x/kurobox_pro-setup.c      |    4 ++--
 arch/arm/mach-orion5x/ls-chl-setup.c           |    2 +-
 arch/arm/mach-orion5x/ls_hgl-setup.c           |    2 +-
 arch/arm/mach-orion5x/lsmini-setup.c           |    2 +-
 arch/arm/mach-orion5x/mss2-setup.c             |    2 +-
 arch/arm/mach-orion5x/mv2120-setup.c           |    2 +-
 arch/arm/mach-orion5x/net2big-setup.c          |    2 +-
 arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c   |    2 +-
 arch/arm/mach-orion5x/rd88f5181l-ge-setup.c    |    2 +-
 arch/arm/mach-orion5x/rd88f5182-setup.c        |    2 +-
 arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c   |    2 +-
 arch/arm/mach-orion5x/terastation_pro2-setup.c |    2 +-
 arch/arm/mach-orion5x/ts209-setup.c            |    2 +-
 arch/arm/mach-orion5x/ts409-setup.c            |    2 +-
 arch/arm/mach-orion5x/ts78xx-setup.c           |    2 +-
 arch/arm/mach-orion5x/wnr854t-setup.c          |    2 +-
 arch/arm/mach-orion5x/wrt350n-v2-setup.c       |    2 +-
 21 files changed, 23 insertions(+), 23 deletions(-)

diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 19cf5bf..8c83009 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -336,7 +336,7 @@ static void __init d2net_init(void)
 
 #ifdef CONFIG_MACH_D2NET
 MACHINE_START(D2NET, "LaCie d2 Network")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= d2net_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
@@ -348,7 +348,7 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_BIGDISK
 MACHINE_START(BIGDISK, "LaCie Big Disk Network")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= d2net_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index f95d3cb..5af3a76 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -358,7 +358,7 @@ static void __init db88f5281_init(void)
 
 MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
 	/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= db88f5281_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 855e0e7..23c46af 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -730,7 +730,7 @@ static void __init dns323_init(void)
 /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
 MACHINE_START(DNS323, "D-Link DNS-323")
 	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= dns323_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
index b67cff0..70a4e92 100644
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -251,7 +251,7 @@ static void __init edmini_v2_init(void)
 /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
 MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2")
 	/* Maintainer: Christopher Moore <moore@free.fr> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= edmini_v2_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index c0eb646..6323ec3 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -379,7 +379,7 @@ static void __init kurobox_pro_init(void)
 #ifdef CONFIG_MACH_KUROBOX_PRO
 MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
 	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= kurobox_pro_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
@@ -392,7 +392,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_LINKSTATION_PRO
 MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
 	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= kurobox_pro_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 5065803..9503fff 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -318,7 +318,7 @@ static void __init lschl_init(void)
 
 MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
 	/* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= lschl_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index 8503d0a..ed6d772 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -265,7 +265,7 @@ static void __init ls_hgl_init(void)
 
 MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
 	/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= ls_hgl_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index 9c82723..743f7f1 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -267,7 +267,7 @@ static void __init lsmini_init(void)
 #ifdef CONFIG_MACH_LINKSTATION_MINI
 MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
 	/* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= lsmini_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 59263b7..5062060 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -261,7 +261,7 @@ static void __init mss2_init(void)
 
 MACHINE_START(MSS2, "Maxtor Shared Storage II")
 	/* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= mss2_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 63ff10c..b3356ad 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -229,7 +229,7 @@ static void __init mv2120_init(void)
 /* Warning: HP uses a wrong mach-type (=526) in their bootloader */
 MACHINE_START(MV2120, "HP Media Vault mv2120")
 	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= mv2120_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index e43b39c..6197c79 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -419,7 +419,7 @@ static void __init net2big_init(void)
 
 /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
 MACHINE_START(NET2BIG, "LaCie 2Big Network")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= net2big_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 9eec7c2..e241b55 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -169,7 +169,7 @@ subsys_initcall(rd88f5181l_fxo_pci_init);
 
 MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
 	/* Maintainer: Nicolas Pitre <nico@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= rd88f5181l_fxo_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 0cc90bb..7ef3e43 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -181,7 +181,7 @@ subsys_initcall(rd88f5181l_ge_pci_init);
 
 MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= rd88f5181l_ge_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 48da39b..3352c07 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -305,7 +305,7 @@ static void __init rd88f5182_init(void)
 
 MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
 	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= rd88f5182_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index ad2eba9..e06fdae 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -122,7 +122,7 @@ subsys_initcall(rd88f6183ap_ge_pci_init);
 
 MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= rd88f6183ap_ge_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 29ce826..2b7164f 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -358,7 +358,7 @@ static void __init tsp2_init(void)
 
 MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
 	/* Maintainer:  Sylver Bruneau <sylver.bruneau@googlemail.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= tsp2_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 47162fd..cae76f4 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -322,7 +322,7 @@ static void __init qnap_ts209_init(void)
 
 MACHINE_START(TS209, "QNAP TS-109/TS-209")
 	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= qnap_ts209_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 5aacc7a..6c4ffe2 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -311,7 +311,7 @@ static void __init qnap_ts409_init(void)
 
 MACHINE_START(TS409, "QNAP TS-409")
 	/* Maintainer:  Sylver Bruneau <sylver.bruneau@gmail.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= qnap_ts409_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 6b7b541..6c75cd3 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -621,7 +621,7 @@ static void __init ts78xx_init(void)
 
 MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
 	/* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= ts78xx_init,
 	.map_io		= ts78xx_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 444a1c7..612a7c4 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -172,7 +172,7 @@ subsys_initcall(wnr854t_pci_init);
 
 MACHINE_START(WNR854T, "Netgear WNR854T")
 	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= wnr854t_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index d1952be..9c73237 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -260,7 +260,7 @@ subsys_initcall(wrt350n_v2_pci_init);
 
 MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.init_machine	= wrt350n_v2_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
-- 
1.7.4

[PATCH 33/52] ARM: mach-pnx4008: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-pnx4008/core.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index 6339975..cdb95e7 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -264,7 +264,7 @@ extern struct sys_timer pnx4008_timer;
 
 MACHINE_START(PNX4008, "Philips PNX4008")
 	/* Maintainer: MontaVista Software Inc. */
-	.boot_params		= 0x80000100,
+	.atag_offset		= 0x100,
 	.map_io 		= pnx4008_map_io,
 	.init_irq 		= pnx4008_init_irq,
 	.init_machine 		= pnx4008_init,
-- 
1.7.4

[PATCH 34/52] ARM: mach-pxa: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-pxa/balloon3.c       |    2 +-
 arch/arm/mach-pxa/capc7117.c       |    2 +-
 arch/arm/mach-pxa/cm-x2xx.c        |    2 +-
 arch/arm/mach-pxa/cm-x300.c        |    2 +-
 arch/arm/mach-pxa/colibri-pxa270.c |    4 ++--
 arch/arm/mach-pxa/colibri-pxa300.c |    2 +-
 arch/arm/mach-pxa/colibri-pxa320.c |    2 +-
 arch/arm/mach-pxa/csb726.c         |    2 +-
 arch/arm/mach-pxa/em-x270.c        |    4 ++--
 arch/arm/mach-pxa/eseries.c        |   12 ++++++------
 arch/arm/mach-pxa/ezx.c            |   12 ++++++------
 arch/arm/mach-pxa/gumstix.c        |    2 +-
 arch/arm/mach-pxa/h5000.c          |    2 +-
 arch/arm/mach-pxa/himalaya.c       |    2 +-
 arch/arm/mach-pxa/hx4700.c         |    2 +-
 arch/arm/mach-pxa/icontrol.c       |    2 +-
 arch/arm/mach-pxa/littleton.c      |    2 +-
 arch/arm/mach-pxa/lpd270.c         |    2 +-
 arch/arm/mach-pxa/magician.c       |    2 +-
 arch/arm/mach-pxa/mainstone.c      |    2 +-
 arch/arm/mach-pxa/mioa701.c        |    2 +-
 arch/arm/mach-pxa/mp900.c          |    2 +-
 arch/arm/mach-pxa/palmld.c         |    2 +-
 arch/arm/mach-pxa/palmt5.c         |    2 +-
 arch/arm/mach-pxa/palmtc.c         |    2 +-
 arch/arm/mach-pxa/palmte2.c        |    2 +-
 arch/arm/mach-pxa/palmtreo.c       |    4 ++--
 arch/arm/mach-pxa/palmtx.c         |    2 +-
 arch/arm/mach-pxa/palmz72.c        |    2 +-
 arch/arm/mach-pxa/pcm027.c         |    2 +-
 arch/arm/mach-pxa/raumfeld.c       |    6 +++---
 arch/arm/mach-pxa/saar.c           |    2 +-
 arch/arm/mach-pxa/saarb.c          |    2 +-
 arch/arm/mach-pxa/stargate2.c      |    4 ++--
 arch/arm/mach-pxa/tavorevb.c       |    2 +-
 arch/arm/mach-pxa/tavorevb3.c      |    2 +-
 arch/arm/mach-pxa/trizeps4.c       |    4 ++--
 arch/arm/mach-pxa/viper.c          |    2 +-
 arch/arm/mach-pxa/vpac270.c        |    2 +-
 arch/arm/mach-pxa/xcep.c           |    2 +-
 arch/arm/mach-pxa/z2.c             |    2 +-
 arch/arm/mach-pxa/zeus.c           |    2 +-
 arch/arm/mach-pxa/zylonite.c       |    2 +-
 43 files changed, 60 insertions(+), 60 deletions(-)

diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 810a982..07c055e 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -827,5 +827,5 @@ MACHINE_START(BALLOON3, "Balloon3")
 	.init_irq	= balloon3_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= balloon3_init,
-	.boot_params	= PLAT_PHYS_OFFSET + 0x100,
+	.atag_offset	= 0x100,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 4284513..4846dd4 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -148,7 +148,7 @@ static void __init capc7117_init(void)
 
 MACHINE_START(CAPC7117,
 	      "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
-	.boot_params = 0xa0000100,
+	.atag_offset = 0x100,
 	.map_io = pxa3xx_map_io,
 	.init_irq = pxa3xx_init_irq,
 	.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index bc55d07..9d921cb 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -512,7 +512,7 @@ static void __init cmx2xx_map_io(void)
 #endif
 
 MACHINE_START(ARMCORE, "Compulab CM-X2XX")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= cmx2xx_map_io,
 	.nr_irqs	= CMX2XX_NR_IRQS,
 	.init_irq	= cmx2xx_init_irq,
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index b2248e7..0bd0c15 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -856,7 +856,7 @@ static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
 }
 
 MACHINE_START(CM_X300, "CM-X300 module")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 7545a48..5f2d30b 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -306,7 +306,7 @@ static void __init colibri_pxa270_income_init(void)
 }
 
 MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
-	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.init_machine	= colibri_pxa270_init,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
@@ -314,7 +314,7 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
 MACHINE_END
 
 MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.init_machine	= colibri_pxa270_income_init,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 66dd81c..e6f3cd9 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -183,7 +183,7 @@ void __init colibri_pxa300_init(void)
 }
 
 MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
-	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.init_machine	= colibri_pxa300_init,
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index ff9ff5f..de99efa 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -254,7 +254,7 @@ void __init colibri_pxa320_init(void)
 }
 
 MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
-	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.init_machine	= colibri_pxa320_init,
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 0481c29..9cbd37b 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -273,7 +273,7 @@ static void __init csb726_init(void)
 }
 
 MACHINE_START(CSB726, "Cogent CSB726")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io         = pxa27x_map_io,
 	.init_irq       = pxa27x_init_irq,
 	.init_machine   = csb726_init,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index f8a6e9d..677a435 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1299,7 +1299,7 @@ static void __init em_x270_init(void)
 }
 
 MACHINE_START(EM_X270, "Compulab EM-X270")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
@@ -1307,7 +1307,7 @@ MACHINE_START(EM_X270, "Compulab EM-X270")
 MACHINE_END
 
 MACHINE_START(EXEDA, "Compulab eXeda")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 2e3970f..2d827d9 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -189,7 +189,7 @@ static void __init e330_init(void)
 
 MACHINE_START(E330, "Toshiba e330")
 	/* Maintainer: Ian Molton (spyro at f2s.com) */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
@@ -238,7 +238,7 @@ static void __init e350_init(void)
 
 MACHINE_START(E350, "Toshiba e350")
 	/* Maintainer: Ian Molton (spyro at f2s.com) */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
@@ -360,7 +360,7 @@ static void __init e400_init(void)
 
 MACHINE_START(E400, "Toshiba e400")
 	/* Maintainer: Ian Molton (spyro at f2s.com) */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
@@ -548,7 +548,7 @@ static void __init e740_init(void)
 
 MACHINE_START(E740, "Toshiba e740")
 	/* Maintainer: Ian Molton (spyro at f2s.com) */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
@@ -739,7 +739,7 @@ static void __init e750_init(void)
 
 MACHINE_START(E750, "Toshiba e750")
 	/* Maintainer: Ian Molton (spyro at f2s.com) */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
@@ -943,7 +943,7 @@ static void __init e800_init(void)
 
 MACHINE_START(E800, "Toshiba e800")
 	/* Maintainer: Ian Molton (spyro at f2s.com) */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index d88aed8..0d263e0 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -797,7 +797,7 @@ static void __init a780_init(void)
 }
 
 MACHINE_START(EZX_A780, "Motorola EZX A780")
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
@@ -862,7 +862,7 @@ static void __init e680_init(void)
 }
 
 MACHINE_START(EZX_E680, "Motorola EZX E680")
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
@@ -927,7 +927,7 @@ static void __init a1200_init(void)
 }
 
 MACHINE_START(EZX_A1200, "Motorola EZX A1200")
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
@@ -1117,7 +1117,7 @@ static void __init a910_init(void)
 }
 
 MACHINE_START(EZX_A910, "Motorola EZX A910")
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
@@ -1182,7 +1182,7 @@ static void __init e6_init(void)
 }
 
 MACHINE_START(EZX_E6, "Motorola EZX E6")
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
@@ -1221,7 +1221,7 @@ static void __init e2_init(void)
 }
 
 MACHINE_START(EZX_E2, "Motorola EZX E2")
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index d65e4bd..c7753ae 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -233,7 +233,7 @@ static void __init gumstix_init(void)
 }
 
 MACHINE_START(GUMSTIX, "Gumstix")
-	.boot_params	= 0xa0000100, /* match u-boot bi_boot_params */
+	.atag_offset	= 0x100, /* match u-boot bi_boot_params */
 	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index 657db46..3b994f7 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -202,7 +202,7 @@ static void __init h5000_init(void)
 }
 
 MACHINE_START(H5400, "HP iPAQ H5000")
-	.boot_params = 0xa0000100,
+	.atag_offset = 0x100,
 	.map_io = pxa25x_map_io,
 	.init_irq = pxa25x_init_irq,
 	.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index e8603eb..7161340 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -159,7 +159,7 @@ static void __init himalaya_init(void)
 
 
 MACHINE_START(HIMALAYA, "HTC Himalaya")
-	.boot_params = 0xa0000100,
+	.atag_offset = 0x100,
 	.map_io = pxa25x_map_io,
 	.init_irq = pxa25x_init_irq,
 	.init_machine = himalaya_init,
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index f941a49..322ea99 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -870,7 +870,7 @@ static void __init hx4700_init(void)
 }
 
 MACHINE_START(H4700, "HP iPAQ HX4700")
-	.boot_params  = 0xa0000100,
+	.atag_offset  = 0x100,
 	.map_io       = pxa27x_map_io,
 	.nr_irqs      = HX4700_NR_IRQS,
 	.init_irq     = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index 6cedc81..8c08bcf 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -191,7 +191,7 @@ static void __init icontrol_init(void)
 }
 
 MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index e5e326d..ebc3b7f 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -437,7 +437,7 @@ static void __init littleton_init(void)
 }
 
 MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa3xx_map_io,
 	.nr_irqs	= LITTLETON_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 6cf8180..3fb82e4 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -499,7 +499,7 @@ static void __init lpd270_map_io(void)
 
 MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
 	/* Maintainer: Peter Barada */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= lpd270_map_io,
 	.nr_irqs	= LPD270_NR_IRQS,
 	.init_irq	= lpd270_init_irq,
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index e192057..f14c3c7 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -764,7 +764,7 @@ static void __init magician_init(void)
 
 
 MACHINE_START(MAGICIAN, "HTC Magician")
-	.boot_params = 0xa0000100,
+	.atag_offset = 0x100,
 	.map_io = pxa27x_map_io,
 	.nr_irqs = MAGICIAN_NR_IRQS,
 	.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 3479e2b..92227ff 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -616,7 +616,7 @@ static void __init mainstone_map_io(void)
 
 MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
 	/* Maintainer: MontaVista Software Inc. */
-	.boot_params	= 0xa0000100,	/* BLOB boot parameter setting */
+	.atag_offset	= 0x100,	/* BLOB boot parameter setting */
 	.map_io		= mainstone_map_io,
 	.nr_irqs	= MAINSTONE_NR_IRQS,
 	.init_irq	= mainstone_init_irq,
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index e347013..918589c 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -791,7 +791,7 @@ static void mioa701_machine_exit(void)
 }
 
 MACHINE_START(MIOA701, "MIO A701")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= &pxa27x_map_io,
 	.init_irq	= &pxa27x_init_irq,
 	.init_machine	= mioa701_machine_init,
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 59cce78..3acd0c4 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -92,7 +92,7 @@ static void __init mp900c_init(void)
 
 /* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
 MACHINE_START(NEC_MP900, "MobilePro900/C")
-	.boot_params	= 0xa0220100,
+	.atag_offset	= 0x220100,
 	.timer		= &pxa_timer,
 	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 4061ecd..e4ccdf7 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -342,7 +342,7 @@ static void __init palmld_init(void)
 }
 
 MACHINE_START(PALMLD, "Palm LifeDrive")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= palmld_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index df4d7d0..651c6ff 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -202,7 +202,7 @@ static void __init palmt5_init(void)
 }
 
 MACHINE_START(PALMT5, "Palm Tungsten|T5")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa27x_map_io,
 	.reserve	= palmt5_reserve,
 	.init_irq	= pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index fb06bd0..991c65c 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -538,7 +538,7 @@ static void __init palmtc_init(void)
 };
 
 MACHINE_START(PALMTC, "Palm Tungsten|C")
-	.boot_params 	= 0xa0000100,
+	.atag_offset 	= 0x100,
 	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 726f5b9..03dfe5e 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -356,7 +356,7 @@ static void __init palmte2_init(void)
 }
 
 MACHINE_START(PALMTE2, "Palm Tungsten|E2")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 20d1b18..bda7f28 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -440,7 +440,7 @@ static void __init centro_init(void)
 }
 
 MACHINE_START(TREO680, "Palm Treo 680")
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa27x_map_io,
 	.reserve	= treo_reserve,
 	.init_irq       = pxa27x_init_irq,
@@ -449,7 +449,7 @@ MACHINE_START(TREO680, "Palm Treo 680")
 MACHINE_END
 
 MACHINE_START(CENTRO, "Palm Centro 685")
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa27x_map_io,
 	.reserve	= treo_reserve,
 	.init_irq       = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 595f002..8718f06 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -364,7 +364,7 @@ static void __init palmtx_init(void)
 }
 
 MACHINE_START(PALMTX, "Palm T|X")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= palmtx_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 65f24f0..1587aa4 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -398,7 +398,7 @@ static void __init palmz72_init(void)
 }
 
 MACHINE_START(PALMZ72, "Palm Zire72")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 1fc8a66..b487337 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -258,7 +258,7 @@ static void __init pcm027_map_io(void)
 
 MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
 	/* Maintainer: Pengutronix */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pcm027_map_io,
 	.nr_irqs	= PCM027_NR_IRQS,
 	.init_irq	= pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index d130f77..32cc3ea 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -1087,7 +1087,7 @@ static void __init raumfeld_speaker_init(void)
 
 #ifdef CONFIG_MACH_RAUMFELD_RC
 MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
-	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.init_machine	= raumfeld_controller_init,
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
@@ -1097,7 +1097,7 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_RAUMFELD_CONNECTOR
 MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
-	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.init_machine	= raumfeld_connector_init,
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
@@ -1107,7 +1107,7 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_RAUMFELD_SPEAKER
 MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
-	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.init_machine	= raumfeld_speaker_init,
 	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index fee97a9..2e7ae07 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -596,7 +596,7 @@ static void __init saar_init(void)
 
 MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
 	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa3xx_map_io,
 	.init_irq       = pxa3xx_init_irq,
 	.timer          = &pxa_timer,
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index 9322fe5..d34b5c8 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -103,7 +103,7 @@ static void __init saarb_init(void)
 }
 
 MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa_map_io,
 	.nr_irqs	= SAARB_NR_IRQS,
 	.init_irq       = pxa95x_init_irq,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index cb5611d..c4c5c3c 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -1003,7 +1003,7 @@ MACHINE_START(INTELMOTE2, "IMOTE 2")
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= imote2_init,
-	.boot_params	= 0xA0000100,
+	.atag_offset	= 0x100,
 MACHINE_END
 #endif
 
@@ -1014,6 +1014,6 @@ MACHINE_START(STARGATE2, "Stargate 2")
 	.init_irq = pxa27x_init_irq,
 	.timer = &pxa_timer,
 	.init_machine = stargate2_init,
-	.boot_params = 0xA0000100,
+	.atag_offset = 0x100,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 53d4a47..105bd36 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -489,7 +489,7 @@ static void __init tavorevb_init(void)
 
 MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
 	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
-	.boot_params    = 0xa0000100,
+	.atag_offset    = 0x100,
 	.map_io         = pxa3xx_map_io,
 	.init_irq       = pxa3xx_init_irq,
 	.timer          = &pxa_timer,
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index 79f4422..a47bcf5 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -125,7 +125,7 @@ static void __init evb3_init(void)
 }
 
 MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io         = pxa3xx_map_io,
 	.nr_irqs	= TAVOREVB3_NR_IRQS,
 	.init_irq       = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 687417a..1bac844 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -554,7 +554,7 @@ static void __init trizeps4_map_io(void)
 
 MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
 	/* MAINTAINER("J?rgen Schindele") */
-	.boot_params	= TRIZEPS4_SDRAM_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.init_machine	= trizeps4_init,
 	.map_io		= trizeps4_map_io,
 	.init_irq	= pxa27x_init_irq,
@@ -563,7 +563,7 @@ MACHINE_END
 
 MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
 	/* MAINTAINER("J?rgen Schindele") */
-	.boot_params	= TRIZEPS4_SDRAM_BASE + 0x100,
+	.atag_offset	= 0x100,
 	.init_machine	= trizeps4_init,
 	.map_io		= trizeps4_map_io,
 	.init_irq	= pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 903218e..e879382 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -992,7 +992,7 @@ static void __init viper_map_io(void)
 
 MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
 	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= viper_map_io,
 	.init_irq	= viper_init_irq,
 	.timer          = &pxa_timer,
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 67bd414..6fc0f08 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -716,7 +716,7 @@ static void __init vpac270_init(void)
 }
 
 MACHINE_START(VPAC270, "Voipac PXA270")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index f55f8f2..5b06203 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -181,7 +181,7 @@ static void __init xcep_init(void)
 }
 
 MACHINE_START(XCEP, "Iskratel XCEP")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.init_machine	= xcep_init,
 	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index fbe9e02..ec91c4c 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -701,7 +701,7 @@ static void __init z2_init(void)
 }
 
 MACHINE_START(ZIPIT2, "Zipit Z2")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 00363c7..56fa747 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -904,7 +904,7 @@ static void __init zeus_map_io(void)
 
 MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
 	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= zeus_map_io,
 	.nr_irqs	= ZEUS_NR_IRQS,
 	.init_irq	= zeus_init_irq,
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 5821185..0b41ff6 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -422,7 +422,7 @@ static void __init zylonite_init(void)
 }
 
 MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
-	.boot_params	= 0xa0000100,
+	.atag_offset	= 0x100,
 	.map_io		= pxa3xx_map_io,
 	.nr_irqs	= ZYLONITE_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
-- 
1.7.4

[PATCH 35/52] ARM: mach-realview: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-realview/realview_eb.c     |    2 +-
 arch/arm/mach-realview/realview_pb1176.c |    2 +-
 arch/arm/mach-realview/realview_pb11mp.c |    2 +-
 arch/arm/mach-realview/realview_pba8.c   |    2 +-
 arch/arm/mach-realview/realview_pbx.c    |    2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 006a11b..714993d 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -463,7 +463,7 @@ static void __init realview_eb_init(void)
 
 MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= PLAT_PHYS_OFFSET + 0x00000100,
+	.atag_offset	= 0x100,
 	.fixup		= realview_fixup,
 	.map_io		= realview_eb_map_io,
 	.init_early	= realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index a43ca35..ba55b47 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -358,7 +358,7 @@ static void __init realview_pb1176_init(void)
 
 MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= PLAT_PHYS_OFFSET + 0x00000100,
+	.atag_offset	= 0x100,
 	.fixup		= realview_pb1176_fixup,
 	.map_io		= realview_pb1176_map_io,
 	.init_early	= realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 1f56fef..516e73e 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -360,7 +360,7 @@ static void __init realview_pb11mp_init(void)
 
 MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= PLAT_PHYS_OFFSET + 0x00000100,
+	.atag_offset	= 0x100,
 	.fixup		= realview_fixup,
 	.map_io		= realview_pb11mp_map_io,
 	.init_early	= realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 64374d7..0398e75 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -310,7 +310,7 @@ static void __init realview_pba8_init(void)
 
 MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= PLAT_PHYS_OFFSET + 0x00000100,
+	.atag_offset	= 0x100,
 	.fixup		= realview_fixup,
 	.map_io		= realview_pba8_map_io,
 	.init_early	= realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 1f9eae6..3bebb50 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -393,7 +393,7 @@ static void __init realview_pbx_init(void)
 
 MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= PLAT_PHYS_OFFSET + 0x00000100,
+	.atag_offset	= 0x100,
 	.fixup		= realview_pbx_fixup,
 	.map_io		= realview_pbx_map_io,
 	.init_early	= realview_init_early,
-- 
1.7.4

[PATCH 36/52] ARM: mach-rpc: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-rpc/riscpc.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index fd086ff..3e3d7d7 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -222,7 +222,7 @@ extern struct sys_timer ioc_timer;
 
 MACHINE_START(RISCPC, "Acorn-RiscPC")
 	/* Maintainer: Russell King */
-	.boot_params	= 0x10000100,
+	.atag_offset	= 0x100,
 	.reserve_lp0	= 1,
 	.reserve_lp1	= 1,
 	.map_io		= rpc_map_io,
-- 
1.7.4

[PATCH 37/52] ARM: mach-s3c24*: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-s3c2410/mach-amlm5900.c   |    2 +-
 arch/arm/mach-s3c2410/mach-bast.c       |    2 +-
 arch/arm/mach-s3c2410/mach-h1940.c      |    2 +-
 arch/arm/mach-s3c2410/mach-n30.c        |    4 ++--
 arch/arm/mach-s3c2410/mach-otom.c       |    2 +-
 arch/arm/mach-s3c2410/mach-qt2410.c     |    2 +-
 arch/arm/mach-s3c2410/mach-smdk2410.c   |    2 +-
 arch/arm/mach-s3c2410/mach-tct_hammer.c |    2 +-
 arch/arm/mach-s3c2410/mach-vr1000.c     |    2 +-
 arch/arm/mach-s3c2412/mach-jive.c       |    2 +-
 arch/arm/mach-s3c2412/mach-smdk2413.c   |    6 +++---
 arch/arm/mach-s3c2412/mach-vstms.c      |    2 +-
 arch/arm/mach-s3c2416/mach-smdk2416.c   |    2 +-
 arch/arm/mach-s3c2440/mach-anubis.c     |    2 +-
 arch/arm/mach-s3c2440/mach-at2440evb.c  |    2 +-
 arch/arm/mach-s3c2440/mach-gta02.c      |    2 +-
 arch/arm/mach-s3c2440/mach-mini2440.c   |    2 +-
 arch/arm/mach-s3c2440/mach-nexcoder.c   |    2 +-
 arch/arm/mach-s3c2440/mach-osiris.c     |    2 +-
 arch/arm/mach-s3c2440/mach-rx1950.c     |    2 +-
 arch/arm/mach-s3c2440/mach-rx3715.c     |    2 +-
 arch/arm/mach-s3c2440/mach-smdk2440.c   |    2 +-
 arch/arm/mach-s3c2443/mach-smdk2443.c   |    2 +-
 23 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index dabc141..7983894 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -236,7 +236,7 @@ static void __init amlm5900_init(void)
 }
 
 MACHINE_START(AML_M5900, "AML_M5900")
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= amlm5900_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= amlm5900_init,
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 1e2d536..a20ae1a 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -657,7 +657,7 @@ static void __init bast_init(void)
 
 MACHINE_START(BAST, "Simtec-BAST")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= bast_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= bast_init,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 2a2fa06..556c535 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -744,7 +744,7 @@ static void __init h1940_init(void)
 
 MACHINE_START(H1940, "IPAQ-H1940")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= h1940_map_io,
 	.reserve	= h1940_reserve,
 	.init_irq	= h1940_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 079dcaa..1dc3e32 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -586,7 +586,7 @@ MACHINE_START(N30, "Acer-N30")
 	/* Maintainer: Christer Weinigel <christer@weinigel.se>,
 				Ben Dooks <ben-linux@fluff.org>
 	*/
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.timer		= &s3c24xx_timer,
 	.init_machine	= n30_init,
 	.init_irq	= s3c24xx_init_irq,
@@ -596,7 +596,7 @@ MACHINE_END
 MACHINE_START(N35, "Acer-N35")
 	/* Maintainer: Christer Weinigel <christer@weinigel.se>
 	*/
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.timer		= &s3c24xx_timer,
 	.init_machine	= n30_init,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index 0aa16cd..f03f3fd 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -116,7 +116,7 @@ static void __init otom11_init(void)
 
 MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
 	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= otom11_map_io,
 	.init_machine	= otom11_init,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index e8f49fe..33fd832 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -362,7 +362,7 @@ static void __init qt2410_machine_init(void)
 }
 
 MACHINE_START(QT2410, "QT2410")
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= qt2410_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= qt2410_machine_init,
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index e17f033..99c9dfd 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -111,7 +111,7 @@ static void __init smdk2410_init(void)
 MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
 				    * to SMDK2410 */
 	/* Maintainer: Jonas Dietsche */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= smdk2410_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= smdk2410_init,
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index 43c2b83..e0d0b6f 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -146,7 +146,7 @@ static void __init tct_hammer_init(void)
 }
 
 MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= tct_hammer_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= tct_hammer_init,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 6ccce5a..df47e8e 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -400,7 +400,7 @@ static void __init vr1000_init(void)
 
 MACHINE_START(VR1000, "Thorcom-VR1000")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= vr1000_map_io,
 	.init_machine	= vr1000_init,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 85dcaeb..6a143ea 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -668,7 +668,7 @@ static void __init jive_machine_init(void)
 
 MACHINE_START(JIVE, "JIVE")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= jive_map_io,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 834cfb6..d6325ed 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -128,7 +128,7 @@ static void __init smdk2413_machine_init(void)
 
 MACHINE_START(S3C2413, "S3C2413")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 
 	.fixup		= smdk2413_fixup,
 	.init_irq	= s3c24xx_init_irq,
@@ -139,7 +139,7 @@ MACHINE_END
 
 MACHINE_START(SMDK2412, "SMDK2412")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 
 	.fixup		= smdk2413_fixup,
 	.init_irq	= s3c24xx_init_irq,
@@ -150,7 +150,7 @@ MACHINE_END
 
 MACHINE_START(SMDK2413, "SMDK2413")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 
 	.fixup		= smdk2413_fixup,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 83544eb..5955c15 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -156,7 +156,7 @@ static void __init vstms_init(void)
 }
 
 MACHINE_START(VSTMS, "VSTMS")
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 
 	.fixup		= vstms_fixup,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c
index ac27ebb..a9eee53 100644
--- a/arch/arm/mach-s3c2416/mach-smdk2416.c
+++ b/arch/arm/mach-s3c2416/mach-smdk2416.c
@@ -245,7 +245,7 @@ static void __init smdk2416_machine_init(void)
 
 MACHINE_START(SMDK2416, "SMDK2416")
 	/* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2416_map_io,
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index d708678..74f92fc 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -498,7 +498,7 @@ static void __init anubis_init(void)
 
 MACHINE_START(ANUBIS, "Simtec-Anubis")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= anubis_map_io,
 	.init_machine	= anubis_init,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 6c98b78..38887ee 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -233,7 +233,7 @@ static void __init at2440evb_init(void)
 
 
 MACHINE_START(AT2440EVB, "AT2440EVB")
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= at2440evb_map_io,
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 7166620..d085f48 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -596,7 +596,7 @@ static void __init gta02_machine_init(void)
 
 MACHINE_START(NEO1973_GTA02, "GTA02")
 	/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= gta02_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= gta02_machine_init,
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index dd3120d..9e4251f 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -676,7 +676,7 @@ static void __init mini2440_init(void)
 
 MACHINE_START(MINI2440, "MINI2440")
 	/* Maintainer: Michel Pollet <buserror@gmail.com> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= mini2440_map_io,
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 37dd306..61c0bf1 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -151,7 +151,7 @@ static void __init nexcoder_init(void)
 
 MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= nexcoder_map_io,
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index d885363..dc142eb 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -447,7 +447,7 @@ static void __init osiris_init(void)
 
 MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= osiris_map_io,
 	.init_irq	= s3c24xx_init_irq,
 	.init_machine	= osiris_init,
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 27ea950..684dbb3 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -825,7 +825,7 @@ static void __init rx1950_reserve(void)
 
 MACHINE_START(RX1950, "HP iPAQ RX1950")
     /* Maintainers: Vasily Khoruzhick */
-	.boot_params = S3C2410_SDRAM_PA + 0x100,
+	.atag_offset = 0x100,
 	.map_io = rx1950_map_io,
 	.reserve	= rx1950_reserve,
 	.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 1472b1a..e19499c 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -218,7 +218,7 @@ static void __init rx3715_init_machine(void)
 
 MACHINE_START(RX3715, "IPAQ-RX3715")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= rx3715_map_io,
 	.reserve	= rx3715_reserve,
 	.init_irq	= rx3715_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index eedfe0f..36eeb41 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -175,7 +175,7 @@ static void __init smdk2440_machine_init(void)
 
 MACHINE_START(S3C2440, "SMDK2440")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2440_map_io,
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 514275e..bec107e0 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -139,7 +139,7 @@ static void __init smdk2443_machine_init(void)
 
 MACHINE_START(SMDK2443, "SMDK2443")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.atag_offset	= 0x100,
 
 	.init_irq	= s3c24xx_init_irq,
 	.map_io		= smdk2443_map_io,
-- 
1.7.4

[PATCH 38/52] ARM: mach-s5p64x0: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-s5p64x0/mach-smdk6440.c |    2 +-
 arch/arm/mach-s5p64x0/mach-smdk6450.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 2d559f1..8810ee6 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -199,7 +199,7 @@ static void __init smdk6440_machine_init(void)
 
 MACHINE_START(SMDK6440, "SMDK6440")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.boot_params	= S5P64X0_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 
 	.init_irq	= s5p6440_init_irq,
 	.map_io		= smdk6440_map_io,
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index d19c469..2d4a269 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -218,7 +218,7 @@ static void __init smdk6450_machine_init(void)
 
 MACHINE_START(SMDK6450, "SMDK6450")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.boot_params	= S5P64X0_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 
 	.init_irq	= s5p6450_init_irq,
 	.map_io		= smdk6450_map_io,
-- 
1.7.4

[PATCH 39/52] ARM: mach-s3c64xx: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-s3c64xx/mach-anw6410.c  |    2 +-
 arch/arm/mach-s3c64xx/mach-hmt.c      |    2 +-
 arch/arm/mach-s3c64xx/mach-mini6410.c |    2 +-
 arch/arm/mach-s3c64xx/mach-ncp.c      |    2 +-
 arch/arm/mach-s3c64xx/mach-real6410.c |    2 +-
 arch/arm/mach-s3c64xx/mach-smartq5.c  |    2 +-
 arch/arm/mach-s3c64xx/mach-smartq7.c  |    2 +-
 arch/arm/mach-s3c64xx/mach-smdk6400.c |    2 +-
 arch/arm/mach-s3c64xx/mach-smdk6410.c |    2 +-
 9 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index a53cf14..58d8cb5 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -233,7 +233,7 @@ static void __init anw6410_machine_init(void)
 
 MACHINE_START(ANW6410, "A&W6410")
 	/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= anw6410_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index b263958..c4d4d98 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -265,7 +265,7 @@ static void __init hmt_machine_init(void)
 
 MACHINE_START(HMT, "Airgoo-HMT")
 	/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= hmt_map_io,
 	.init_machine	= hmt_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 89f35e0..92b1f35 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -349,7 +349,7 @@ static void __init mini6410_machine_init(void)
 
 MACHINE_START(MINI6410, "MINI6410")
 	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= mini6410_map_io,
 	.init_machine	= mini6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index c498649..5c846be 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -97,7 +97,7 @@ static void __init ncp_machine_init(void)
 
 MACHINE_START(NCP, "NCP")
 	/* Maintainer: Samsung Electronics */
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= ncp_map_io,
 	.init_machine	= ncp_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 4957ab0..0c62366 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -329,7 +329,7 @@ static void __init real6410_machine_init(void)
 
 MACHINE_START(REAL6410, "REAL6410")
 	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= real6410_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 3a3e5ac..22be187 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -146,7 +146,7 @@ static void __init smartq5_machine_init(void)
 
 MACHINE_START(SMARTQ5, "SmartQ 5")
 	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= smartq_map_io,
 	.init_machine	= smartq5_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index e653758..5513f61 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -162,7 +162,7 @@ static void __init smartq7_machine_init(void)
 
 MACHINE_START(SMARTQ7, "SmartQ 7")
 	/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= smartq_map_io,
 	.init_machine	= smartq7_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 3cca642..6fd5e95 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -85,7 +85,7 @@ static void __init smdk6400_machine_init(void)
 
 MACHINE_START(SMDK6400, "SMDK6400")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 
 	.init_irq	= s3c6400_init_irq,
 	.map_io		= smdk6400_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 2c0353a..b21f1b2 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -745,7 +745,7 @@ static void __init smdk6410_machine_init(void)
 
 MACHINE_START(SMDK6410, "SMDK6410")
 	/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
-	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 
 	.init_irq	= s3c6410_init_irq,
 	.map_io		= smdk6410_map_io,
-- 
1.7.4

[PATCH 40/52] ARM: mach-s5pc100, mach-s5pv210: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-s5pc100/mach-smdkc100.c |    2 +-
 arch/arm/mach-s5pv210/mach-aquila.c   |    2 +-
 arch/arm/mach-s5pv210/mach-goni.c     |    2 +-
 arch/arm/mach-s5pv210/mach-smdkc110.c |    2 +-
 arch/arm/mach-s5pv210/mach-smdkv210.c |    2 +-
 arch/arm/mach-s5pv210/mach-torbreck.c |    2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 0525cb3..4328a02 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -281,7 +281,7 @@ static void __init smdkc100_machine_init(void)
 
 MACHINE_START(SMDKC100, "SMDKC100")
 	/* Maintainer: Byungho Min <bhmin@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s5pc100_init_irq,
 	.map_io		= smdkc100_map_io,
 	.init_machine	= smdkc100_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 4e1d8ff..95d3c8e 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -678,7 +678,7 @@ MACHINE_START(AQUILA, "Aquila")
 	/* Maintainers:
 	   Marek Szyprowski <m.szyprowski@samsung.com>
 	   Kyungmin Park <kyungmin.park@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= aquila_map_io,
 	.init_machine	= aquila_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 31d5aa7..cfa18ac 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -888,7 +888,7 @@ static void __init goni_machine_init(void)
 
 MACHINE_START(GONI, "GONI")
 	/* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= goni_map_io,
 	.init_machine	= goni_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 6c412c8..f7266bb 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -136,7 +136,7 @@ static void __init smdkc110_machine_init(void)
 
 MACHINE_START(SMDKC110, "SMDKC110")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= smdkc110_map_io,
 	.init_machine	= smdkc110_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index c6a9e86..535de9f 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -346,7 +346,7 @@ static void __init smdkv210_machine_init(void)
 
 MACHINE_START(SMDKV210, "SMDKV210")
 	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= smdkv210_map_io,
 	.init_machine	= smdkv210_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 925fc0d..97cc066 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -125,7 +125,7 @@ static void __init torbreck_machine_init(void)
 
 MACHINE_START(TORBRECK, "TORBRECK")
 	/* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */
-	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.atag_offset	= 0x100,
 	.init_irq	= s5pv210_init_irq,
 	.map_io		= torbreck_map_io,
 	.init_machine	= torbreck_machine_init,
-- 
1.7.4

[PATCH 41/52] ARM: mach-sa1100: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-sa1100/assabet.c    |    2 +-
 arch/arm/mach-sa1100/badge4.c     |    2 +-
 arch/arm/mach-sa1100/h3100.c      |    2 +-
 arch/arm/mach-sa1100/h3600.c      |    2 +-
 arch/arm/mach-sa1100/hackkit.c    |    2 +-
 arch/arm/mach-sa1100/jornada720.c |    2 +-
 arch/arm/mach-sa1100/lart.c       |    2 +-
 arch/arm/mach-sa1100/nanoengine.c |    2 +-
 arch/arm/mach-sa1100/shannon.c    |    2 +-
 arch/arm/mach-sa1100/simpad.c     |    2 +-
 10 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 26257df..d40da5f 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -447,7 +447,7 @@ static void __init assabet_map_io(void)
 
 
 MACHINE_START(ASSABET, "Intel-Assabet")
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.fixup		= fixup_assabet,
 	.map_io		= assabet_map_io,
 	.init_irq	= sa1100_init_irq,
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b4311b0..bda83e1 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -302,7 +302,7 @@ static void __init badge4_map_io(void)
 }
 
 MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.map_io		= badge4_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index 03d7376..b30733a 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -84,7 +84,7 @@ static void __init h3100_mach_init(void)
 }
 
 MACHINE_START(H3100, "Compaq iPAQ H3100")
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.map_io		= h3100_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 965f64a..6fd324d 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -125,7 +125,7 @@ static void __init h3600_mach_init(void)
 }
 
 MACHINE_START(H3600, "Compaq iPAQ H3600")
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.map_io		= h3600_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index db5e434..30f4a55 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -195,7 +195,7 @@ static void __init hackkit_init(void)
  */
 
 MACHINE_START(HACKKIT, "HackKit Cpu Board")
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.map_io		= hackkit_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 176c066..0bb520d 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -364,7 +364,7 @@ static void __init jornada720_mach_init(void)
 
 MACHINE_START(JORNADA720, "HP Jornada 720")
 	/* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.map_io		= jornada720_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 7b9556b..5bc59d0 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -61,7 +61,7 @@ static void __init lart_map_io(void)
 }
 
 MACHINE_START(LART, "LART")
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.map_io		= lart_map_io,
 	.init_irq	= sa1100_init_irq,
 	.init_machine	= lart_init,
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 72087f0..032f388 100644
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -111,7 +111,7 @@ static void __init nanoengine_init(void)
 }
 
 MACHINE_START(NANOENGINE, "BSE nanoEngine")
-	.boot_params	= 0xc0000000,
+	.atag_offset	= 0x100,
 	.map_io		= nanoengine_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 7917b24..1cccbf5 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -82,7 +82,7 @@ static void __init shannon_map_io(void)
 }
 
 MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.map_io		= shannon_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index cfb7607..a1c2427 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -229,7 +229,7 @@ arch_initcall(simpad_init);
 
 MACHINE_START(SIMPAD, "Simpad")
 	/* Maintainer: Holger Freyther */
-	.boot_params	= 0xc0000100,
+	.atag_offset	= 0x100,
 	.map_io		= simpad_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
-- 
1.7.4

[PATCH 42/52] ARM: mach-shark: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-shark/core.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index 1173082..042d5d8 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -154,7 +154,7 @@ static struct sys_timer shark_timer = {
 
 MACHINE_START(SHARK, "Shark")
 	/* Maintainer: Alexander Schulz */
-	.boot_params	= 0x08003000,
+	.atag_offset	= 0x3000,
 	.map_io		= shark_map_io,
 	.init_irq	= shark_init_irq,
 	.timer		= &shark_timer,
-- 
1.7.4

[PATCH 43/52] ARM: mach-spear*: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-spear3xx/spear300_evb.c |    2 +-
 arch/arm/mach-spear3xx/spear310_evb.c |    2 +-
 arch/arm/mach-spear3xx/spear320_evb.c |    2 +-
 arch/arm/mach-spear6xx/spear600_evb.c |    2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
index 69006f6..a5ff98e 100644
--- a/arch/arm/mach-spear3xx/spear300_evb.c
+++ b/arch/arm/mach-spear3xx/spear300_evb.c
@@ -64,7 +64,7 @@ static void __init spear300_evb_init(void)
 }
 
 MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
-	.boot_params	=	0x00000100,
+	.atag_offset	=	0x100,
 	.map_io		=	spear3xx_map_io,
 	.init_irq	=	spear3xx_init_irq,
 	.timer		=	&spear3xx_timer,
diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
index c8684ce..45d180d 100644
--- a/arch/arm/mach-spear3xx/spear310_evb.c
+++ b/arch/arm/mach-spear3xx/spear310_evb.c
@@ -70,7 +70,7 @@ static void __init spear310_evb_init(void)
 }
 
 MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
-	.boot_params	=	0x00000100,
+	.atag_offset	=	0x100,
 	.map_io		=	spear3xx_map_io,
 	.init_irq	=	spear3xx_init_irq,
 	.timer		=	&spear3xx_timer,
diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
index a12b353..2287984 100644
--- a/arch/arm/mach-spear3xx/spear320_evb.c
+++ b/arch/arm/mach-spear3xx/spear320_evb.c
@@ -68,7 +68,7 @@ static void __init spear320_evb_init(void)
 }
 
 MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
-	.boot_params	=	0x00000100,
+	.atag_offset	=	0x100,
 	.map_io		=	spear3xx_map_io,
 	.init_irq	=	spear3xx_init_irq,
 	.timer		=	&spear3xx_timer,
diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c
index f19cefe..8238fe3 100644
--- a/arch/arm/mach-spear6xx/spear600_evb.c
+++ b/arch/arm/mach-spear6xx/spear600_evb.c
@@ -43,7 +43,7 @@ static void __init spear600_evb_init(void)
 }
 
 MACHINE_START(SPEAR600, "ST-SPEAR600-EVB")
-	.boot_params	=	0x00000100,
+	.atag_offset	=	0x100,
 	.map_io		=	spear6xx_map_io,
 	.init_irq	=	spear6xx_init_irq,
 	.timer		=	&spear6xx_timer,
-- 
1.7.4

[PATCH 44/52] ARM: mach-tcc8k: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-tcc8k/board-tcc8000-sdk.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
index 4cb3c2d..777a5bb 100644
--- a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
+++ b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
@@ -73,7 +73,7 @@ static void __init tcc8k_map_io(void)
 }
 
 MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board")
-	.boot_params	= PLAT_PHYS_OFFSET + 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= tcc8k_map_io,
 	.init_irq	= tcc8k_init_irq,
 	.init_machine	= tcc8k_init,
-- 
1.7.4

[PATCH 45/52] ARM: mach-tegra: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-tegra/board-harmony.c   |    2 +-
 arch/arm/mach-tegra/board-paz00.c     |    2 +-
 arch/arm/mach-tegra/board-seaboard.c  |    6 +++---
 arch/arm/mach-tegra/board-trimslice.c |    2 +-
 4 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index 30e18bc..99c6be7 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -201,7 +201,7 @@ static void __init tegra_harmony_init(void)
 }
 
 MACHINE_START(HARMONY, "harmony")
-	.boot_params  = 0x00000100,
+	.atag_offset	= 0x100,
 	.fixup		= tegra_harmony_fixup,
 	.map_io         = tegra_map_common_io,
 	.init_early	= tegra_init_early,
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 57e50a8..afb735d 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -118,7 +118,7 @@ static void __init tegra_paz00_init(void)
 }
 
 MACHINE_START(PAZ00, "paz00")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.fixup		= tegra_paz00_fixup,
 	.map_io         = tegra_map_common_io,
 	.init_early	= tegra_init_early,
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index a8d7ace..647b15e 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -223,7 +223,7 @@ static void __init tegra_wario_init(void)
 
 
 MACHINE_START(SEABOARD, "seaboard")
-	.boot_params    = 0x00000100,
+	.atag_offset    = 0x100,
 	.map_io         = tegra_map_common_io,
 	.init_early     = tegra_init_early,
 	.init_irq       = tegra_init_irq,
@@ -232,7 +232,7 @@ MACHINE_START(SEABOARD, "seaboard")
 MACHINE_END
 
 MACHINE_START(KAEN, "kaen")
-	.boot_params    = 0x00000100,
+	.atag_offset    = 0x100,
 	.map_io         = tegra_map_common_io,
 	.init_early     = tegra_init_early,
 	.init_irq       = tegra_init_irq,
@@ -241,7 +241,7 @@ MACHINE_START(KAEN, "kaen")
 MACHINE_END
 
 MACHINE_START(WARIO, "wario")
-	.boot_params    = 0x00000100,
+	.atag_offset    = 0x100,
 	.map_io         = tegra_map_common_io,
 	.init_early     = tegra_init_early,
 	.init_irq       = tegra_init_irq,
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index cda4cfd..ed3505d 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -115,7 +115,7 @@ static void __init tegra_trimslice_init(void)
 }
 
 MACHINE_START(TRIMSLICE, "trimslice")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.fixup		= tegra_trimslice_fixup,
 	.map_io         = tegra_map_common_io,
 	.init_early	= tegra_init_early,
-- 
1.7.4

[PATCH 46/52] ARM: mach-u300: convert boot_params to atag_offset

[Nicolas Pitre]

Someone was smoking good stuff with CONFIG_MACH_U300_2MB_ALIGNMENT_FIX here...

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-u300/include/mach/memory.h |    8 ++++----
 arch/arm/mach-u300/u300.c                |    2 +-
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
index 888e2e3..f98acd9 100644
--- a/arch/arm/mach-u300/include/mach/memory.h
+++ b/arch/arm/mach-u300/include/mach/memory.h
@@ -16,7 +16,7 @@
 #ifdef CONFIG_MACH_U300_DUAL_RAM
 
 #define PLAT_PHYS_OFFSET		UL(0x48000000)
-#define BOOT_PARAMS_OFFSET	(PHYS_OFFSET + 0x100)
+#define BOOT_PARAMS_OFFSET		0x100
 
 #else
 
@@ -24,14 +24,14 @@
 #define PLAT_PHYS_OFFSET (0x28000000 + \
 	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE - \
 	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#define BOOT_PARAMS_OFFSET (0x100 + \
+	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1)*1024*1024*2)
 #else
 #define PLAT_PHYS_OFFSET (0x28000000 + \
 	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE +	\
 	     (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#define BOOT_PARAMS_OFFSET 0x100
 #endif
-#define BOOT_PARAMS_OFFSET (0x28000000 + \
-	    (CONFIG_MACH_U300_ACCESS_MEM_SIZE +		\
-	    (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100)
 #endif
 
 /*
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
index 48b3b7f..80e7305 100644
--- a/arch/arm/mach-u300/u300.c
+++ b/arch/arm/mach-u300/u300.c
@@ -61,7 +61,7 @@ static void __init u300_init_machine(void)
 
 MACHINE_START(U300, MACH_U300_STRING)
 	/* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
-	.boot_params	= BOOT_PARAMS_OFFSET,
+	.atag_offset	= BOOT_PARAMS_OFFSET,
 	.map_io		= u300_map_io,
 	.reserve	= u300_reserve,
 	.init_irq	= u300_init_irq,
-- 
1.7.4

[PATCH 46/52] ARM: mach-u300: convert boot_params to atag_offset

[Linus Walleij]

2011/7/6 Nicolas Pitre <nicolas.pitre@linaro.org>:

> Someone was smoking good stuff with CONFIG_MACH_U300_2MB_ALIGNMENT_FIX here...

Haha, it is a consequence of the PHYS_OFFSET having to align on a 2MB
boundary, whereas the actual physical memory was at an odd MB address.
We didn't really like the idea of loosing one megabyte of memory just to
please PHYSOFFSET, so hence this fix.

What we do is round memory upwards to closest 2MB boundary, then we
reserve the first MB. That's why we're having so much fun...

The reason why memory can be at an odd address is that we can
dynamically alter (at boot time) how many MB are reserved for the
accompanying modem CPU.

> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Thanks,
Linus Walleij

[PATCH 46/52] ARM: mach-u300: convert boot_params to atag_offset

[Russell King - ARM Linux]

On Fri, Jul 08, 2011 at 03:12:06PM +0200, Linus Walleij wrote:
> 2011/7/6 Nicolas Pitre <nicolas.pitre@linaro.org>:
> 
> > Someone was smoking good stuff with CONFIG_MACH_U300_2MB_ALIGNMENT_FIX here...
> 
> Haha, it is a consequence of the PHYS_OFFSET having to align on a 2MB
> boundary, whereas the actual physical memory was at an odd MB address.
> We didn't really like the idea of loosing one megabyte of memory just to
> please PHYSOFFSET, so hence this fix.
> 
> What we do is round memory upwards to closest 2MB boundary, then we
> reserve the first MB. That's why we're having so much fun...
> 
> The reason why memory can be at an odd address is that we can
> dynamically alter (at boot time) how many MB are reserved for the
> accompanying modem CPU.

Can it be killed now that we have memblock with a proper reserve callback?
You could locate the kernel higher in memory (eg, 4MB+32K or even 1MB+32K)
keeping the real PHYS_OFFSET/PAGE_OFFSET, and arrange for the ->reserve
callback to mark the first 1MB as reserved, optionally freeing it from
memblock's idea of available memory if you don't want it mapped.

[PATCH 47/52] ARM: mach-ux500: convert boot-params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-ux500/board-mop500.c |    4 ++--
 arch/arm/mach-ux500/board-u5500.c  |    2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index bb26f40..571eab0 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -462,7 +462,7 @@ static void __init mop500_init_machine(void)
 
 MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
 	/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
-	.boot_params	= 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
@@ -471,7 +471,7 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
 MACHINE_END
 
 MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
-	.boot_params	= 0x100,
+	.atag_offset	= 0x100,
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	.timer		= &ux500_timer,
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 44fd3b5..a3f2a81 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -36,7 +36,7 @@ static void __init u5500_init_machine(void)
 }
 
 MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= u5500_map_io,
 	.init_irq	= ux500_init_irq,
 	.timer		= &ux500_timer,
-- 
1.7.4

[PATCH 47/52] ARM: mach-ux500: convert boot-params to atag_offset

[Linus Walleij]

2011/7/6 Nicolas Pitre <nicolas.pitre@linaro.org>:

> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

Looks good,
Acked-by: Linus Walleij <linus.walleij@linaro.org>

Thanks,
Linus Walleij

[PATCH 48/52] ARM: mach-versatile: convert boot-params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-versatile/versatile_ab.c |    2 +-
 arch/arm/mach-versatile/versatile_pb.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index f8ae64b..fda4866 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -35,7 +35,7 @@
 
 MACHINE_START(VERSATILE_AB, "ARM-Versatile AB")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= versatile_map_io,
 	.init_early	= versatile_init_early,
 	.init_irq	= versatile_init_irq,
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 37c23df..feaf9cb 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -103,7 +103,7 @@ static void __init versatile_pb_init(void)
 
 MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= versatile_map_io,
 	.init_early	= versatile_init_early,
 	.init_irq	= versatile_init_irq,
-- 
1.7.4

[PATCH 49/52] ARM: vexpress: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-vexpress/v2m.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 9e6b93b..de72058 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -436,7 +436,7 @@ static void __init v2m_init(void)
 }
 
 MACHINE_START(VEXPRESS, "ARM-Versatile Express")
-	.boot_params	= PLAT_PHYS_OFFSET + 0x00000100,
+	.atag_offset	= 0x100,
 	.map_io		= v2m_map_io,
 	.init_early	= v2m_init_early,
 	.init_irq	= v2m_init_irq,
-- 
1.7.4

[PATCH 50/52] ARM: mach-vt8500: convert boot_params to atag_offset

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-vt8500/bv07.c       |    2 +-
 arch/arm/mach-vt8500/wm8505_7in.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-vt8500/bv07.c b/arch/arm/mach-vt8500/bv07.c
index 94a261d..a464c75 100644
--- a/arch/arm/mach-vt8500/bv07.c
+++ b/arch/arm/mach-vt8500/bv07.c
@@ -68,7 +68,7 @@ void __init bv07_init(void)
 }
 
 MACHINE_START(BV07, "Benign BV07 Mini Netbook")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.reserve	= vt8500_reserve_mem,
 	.map_io		= vt8500_map_io,
 	.init_irq	= vt8500_init_irq,
diff --git a/arch/arm/mach-vt8500/wm8505_7in.c b/arch/arm/mach-vt8500/wm8505_7in.c
index e73aadb..cf910a9 100644
--- a/arch/arm/mach-vt8500/wm8505_7in.c
+++ b/arch/arm/mach-vt8500/wm8505_7in.c
@@ -68,7 +68,7 @@ void __init wm8505_7in_init(void)
 }
 
 MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook")
-	.boot_params	= 0x00000100,
+	.atag_offset	= 0x100,
 	.reserve	= wm8505_reserve_mem,
 	.map_io		= wm8505_map_io,
 	.init_irq	= wm8505_init_irq,
-- 
1.7.4

[PATCH 51/52] ARM: mach-w90x900: remove useless boot_params entries

[Nicolas Pitre]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/mach-w90x900/mach-nuc910evb.c |    1 -
 arch/arm/mach-w90x900/mach-nuc950evb.c |    1 -
 arch/arm/mach-w90x900/mach-nuc960evb.c |    1 -
 3 files changed, 0 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
index 30fccde..31c1090 100644
--- a/arch/arm/mach-w90x900/mach-nuc910evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -34,7 +34,6 @@ static void __init nuc910evb_init(void)
 
 MACHINE_START(W90P910EVB, "W90P910EVB")
 	/* Maintainer: Wan ZongShun */
-	.boot_params	= 0,
 	.map_io		= nuc910evb_map_io,
 	.init_irq	= nuc900_init_irq,
 	.init_machine	= nuc910evb_init,
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index 590c99b..4062e55 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -37,7 +37,6 @@ static void __init nuc950evb_init(void)
 
 MACHINE_START(W90P950EVB, "W90P950EVB")
 	/* Maintainer: Wan ZongShun */
-	.boot_params	= 0,
 	.map_io		= nuc950evb_map_io,
 	.init_irq	= nuc900_init_irq,
 	.init_machine	= nuc950evb_init,
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
index e09c645..0ab9995 100644
--- a/arch/arm/mach-w90x900/mach-nuc960evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -34,7 +34,6 @@ static void __init nuc960evb_init(void)
 
 MACHINE_START(W90N960EVB, "W90N960EVB")
 	/* Maintainer: Wan ZongShun */
-	.boot_params	= 0,
 	.map_io		= nuc960evb_map_io,
 	.init_irq	= nuc900_init_irq,
 	.init_machine	= nuc960evb_init,
-- 
1.7.4

[PATCH 52/52] ARM: remove boot_params from struct machine_desc

[Nicolas Pitre]

Now that there is no more users, we can remove it from the kernel.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
 arch/arm/include/asm/mach/arch.h |    1 -
 arch/arm/kernel/setup.c          |   19 -------------------
 2 files changed, 0 insertions(+), 20 deletions(-)

diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 1bdf6e1..e4e8e39 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -17,7 +17,6 @@ struct sys_timer;
 struct machine_desc {
 	unsigned int		nr;		/* architecture number	*/
 	const char		*name;		/* architecture name	*/
-	unsigned long		boot_params;	/* tagged list		*/
 	unsigned long		atag_offset;	/* tagged list (relative) */
 	const char		**dt_compat;	/* array of device tree
 						 * 'compatible' strings	*/
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 4cc3e2b..fc9fc18 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -818,25 +818,6 @@ static struct machine_desc * __init setup_machine_tags(unsigned int nr)
 		tags = phys_to_virt(__atags_pointer);
 	else if(mdesc->atag_offset)
 		tags = PAGE_OFFSET + mdesc->atag_offset;
-	else if (mdesc->boot_params) {
-#ifdef CONFIG_MMU
-		/*
-		 * We still are executing with a minimal MMU mapping created
-		 * with the presumption that the machine default for this
-		 * is located in the first MB of RAM.  Anything else will
-		 * fault and silently hang the kernel at this point.
-		 */
-		if (mdesc->boot_params < PHYS_OFFSET ||
-		    mdesc->boot_params >= PHYS_OFFSET + SZ_1M) {
-			printk(KERN_WARNING
-			       "Default boot params at physical 0x%08lx out of reach\n",
-			       mdesc->boot_params);
-		} else
-#endif
-		{
-			tags = phys_to_virt(mdesc->boot_params);
-		}
-	}
 
 #if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
 	/*
-- 
1.7.4

[PATCH 01/52] ARM: introduce atag_offset to replace boot_params

[Stephen Boyd]

On 07/05/2011 07:46 PM, Nicolas Pitre wrote:
> diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
> index 7b79a00..1bdf6e1 100644
> --- a/arch/arm/include/asm/mach/arch.h
> +++ b/arch/arm/include/asm/mach/arch.h
> @@ -18,6 +18,7 @@ struct machine_desc {
>  	unsigned int		nr;		/* architecture number	*/
>  	const char		*name;		/* architecture name	*/
>  	unsigned long		boot_params;	/* tagged list		*/
> +	unsigned long		atag_offset;	/* tagged list (relative) */
>  	const char		**dt_compat;	/* array of device tree
>  						 * 'compatible' strings	*/
>  
> diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
> index e0db84d..4cc3e2b 100644
> --- a/arch/arm/kernel/setup.c
> +++ b/arch/arm/kernel/setup.c
> @@ -816,6 +816,8 @@ static struct machine_desc * __init setup_machine_tags(unsigned int nr)
>  
>  	if (__atags_pointer)
>  		tags = phys_to_virt(__atags_pointer);
> +	else if(mdesc->atag_offset)
> +		tags = PAGE_OFFSET + mdesc->atag_offset;
>  	else if (mdesc->boot_params) {
>  #ifdef CONFIG_MMU
>  		/*

Would it make sense to drop the atag_offset in most board files and
default it to 0x100 in the MACHINE_START macro itself? It's almost a
universal value and would cut down on hundreds of lines.

-- 
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.

[PATCH 01/52] ARM: introduce atag_offset to replace boot_params

[Nicolas Pitre]

On Tue, 5 Jul 2011, Stephen Boyd wrote:

> On 07/05/2011 07:46 PM, Nicolas Pitre wrote:
> > diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
> > index 7b79a00..1bdf6e1 100644
> > --- a/arch/arm/include/asm/mach/arch.h
> > +++ b/arch/arm/include/asm/mach/arch.h
> > @@ -18,6 +18,7 @@ struct machine_desc {
> >  	unsigned int		nr;		/* architecture number	*/
> >  	const char		*name;		/* architecture name	*/
> >  	unsigned long		boot_params;	/* tagged list		*/
> > +	unsigned long		atag_offset;	/* tagged list (relative) */
> >  	const char		**dt_compat;	/* array of device tree
> >  						 * 'compatible' strings	*/
> >  
> > diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
> > index e0db84d..4cc3e2b 100644
> > --- a/arch/arm/kernel/setup.c
> > +++ b/arch/arm/kernel/setup.c
> > @@ -816,6 +816,8 @@ static struct machine_desc * __init setup_machine_tags(unsigned int nr)
> >  
> >  	if (__atags_pointer)
> >  		tags = phys_to_virt(__atags_pointer);
> > +	else if(mdesc->atag_offset)
> > +		tags = PAGE_OFFSET + mdesc->atag_offset;
> >  	else if (mdesc->boot_params) {
> >  #ifdef CONFIG_MMU
> >  		/*
> 
> Would it make sense to drop the atag_offset in most board files and
> default it to 0x100 in the MACHINE_START macro itself? It's almost a
> universal value and would cut down on hundreds of lines.

Well, no more than 50 lines actually.

And there are those cases where that value is not set to anything, and 
therefore I'd prefer we don't start always assuming something at 0x*100 
for them.  IOW, this is meant to be functionally transparent.


Nicolas

[PATCH 01/52] ARM: introduce atag_offset to replace boot_params

[Stephen Boyd]

On 07/06/2011 05:54 AM, Nicolas Pitre wrote:
> On Tue, 5 Jul 2011, Stephen Boyd wrote:
>
>>
>> Would it make sense to drop the atag_offset in most board files and
>> default it to 0x100 in the MACHINE_START macro itself? It's almost a
>> universal value and would cut down on hundreds of lines.
>
> Well, no more than 50 lines actually.
>
> And there are those cases where that value is not set to anything, and 
> therefore I'd prefer we don't start always assuming something at 0x*100 
> for them.  IOW, this is meant to be functionally transparent.

Fair enough. Probably too magical anyway.

-- 
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.

[PATCH 01/52] ARM: introduce atag_offset to replace boot_params

[H Hartley Sweeten]

On Tuesday, July 05, 2011 7:47 PM, Nicolas Pitre wrote:
> The boot_params member of the mdesc structure is used to provide a
> default physical address for the ATAG list.  Since this value is fixed
> at compile time and often based on ARCH_PHYS_OFFSET, it gets in the way
> of runtime PHYS_OFFSET usage.
> 
> Let's introduce atag_offset which should contains only the relative
> offset from start of memory instead of an absolute value, in preparation
> to move all instance of boot_params over to it.
> 
> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
> ---
>  arch/arm/include/asm/mach/arch.h |    1 +
>  arch/arm/kernel/setup.c          |    2 ++
>  2 files changed, 3 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
> index 7b79a00..1bdf6e1 100644
> --- a/arch/arm/include/asm/mach/arch.h
> +++ b/arch/arm/include/asm/mach/arch.h
> @@ -18,6 +18,7 @@ struct machine_desc {
>  	unsigned int		nr;		/* architecture number	*/
>  	const char		*name;		/* architecture name	*/
>  	unsigned long		boot_params;	/* tagged list		*/
> +	unsigned long		atag_offset;	/* tagged list (relative) */
>  	const char		**dt_compat;	/* array of device tree
>  						 * 'compatible' strings	*/
>  
> diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
> index e0db84d..4cc3e2b 100644
> --- a/arch/arm/kernel/setup.c
> +++ b/arch/arm/kernel/setup.c
> @@ -816,6 +816,8 @@ static struct machine_desc * __init setup_machine_tags(unsigned int nr)
>  
>  	if (__atags_pointer)
>  		tags = phys_to_virt(__atags_pointer);
> +	else if(mdesc->atag_offset)
> +		tags = PAGE_OFFSET + mdesc->atag_offset;

This results in a warning...

arch/arm/kernel/setup.c: In function 'setup_arch':
arch/arm/kernel/setup.c:820: warning: assignment makes pointer from integer without a cast

Regards,
Hartley

[PATCH 01/52] ARM: introduce atag_offset to replace boot_params

[Nicolas Pitre]

On Wed, 6 Jul 2011, H Hartley Sweeten wrote:

> On Tuesday, July 05, 2011 7:47 PM, Nicolas Pitre wrote:
> > The boot_params member of the mdesc structure is used to provide a
> > default physical address for the ATAG list.  Since this value is fixed
> > at compile time and often based on ARCH_PHYS_OFFSET, it gets in the way
> > of runtime PHYS_OFFSET usage.
> > 
> > Let's introduce atag_offset which should contains only the relative
> > offset from start of memory instead of an absolute value, in preparation
> > to move all instance of boot_params over to it.
> > 
> > Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
> > ---
> >  arch/arm/include/asm/mach/arch.h |    1 +
> >  arch/arm/kernel/setup.c          |    2 ++
> >  2 files changed, 3 insertions(+), 0 deletions(-)
> > 
> > diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
> > index 7b79a00..1bdf6e1 100644
> > --- a/arch/arm/include/asm/mach/arch.h
> > +++ b/arch/arm/include/asm/mach/arch.h
> > @@ -18,6 +18,7 @@ struct machine_desc {
> >  	unsigned int		nr;		/* architecture number	*/
> >  	const char		*name;		/* architecture name	*/
> >  	unsigned long		boot_params;	/* tagged list		*/
> > +	unsigned long		atag_offset;	/* tagged list (relative) */
> >  	const char		**dt_compat;	/* array of device tree
> >  						 * 'compatible' strings	*/
> >  
> > diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
> > index e0db84d..4cc3e2b 100644
> > --- a/arch/arm/kernel/setup.c
> > +++ b/arch/arm/kernel/setup.c
> > @@ -816,6 +816,8 @@ static struct machine_desc * __init setup_machine_tags(unsigned int nr)
> >  
> >  	if (__atags_pointer)
> >  		tags = phys_to_virt(__atags_pointer);
> > +	else if(mdesc->atag_offset)
> > +		tags = PAGE_OFFSET + mdesc->atag_offset;
> 
> This results in a warning...
> 
> arch/arm/kernel/setup.c: In function 'setup_arch':
> arch/arm/kernel/setup.c:820: warning: assignment makes pointer from integer without a cast

Bleh.  Fixed, thanks.


Nicolas

[PATCH 01/52] ARM: introduce atag_offset to replace boot_params

[H Hartley Sweeten]

On Wednesday, July 06, 2011 9:04 PM, Nicolas Pitre wrote:
> On Wed, 6 Jul 2011, H Hartley Sweeten wrote:
>>> +	else if(mdesc->atag_offset)
>>> +		tags = PAGE_OFFSET + mdesc->atag_offset;
>> 
>> This results in a warning...
>> 
>> arch/arm/kernel/setup.c: In function 'setup_arch':
>> arch/arm/kernel/setup.c:820: warning: assignment makes pointer from integer without a cast
>
> Bleh.  Fixed, thanks.

Thanks.

Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>

[PATCH 01/52] ARM: introduce atag_offset to replace boot_params

[Sergei Shtylyov]

Hello.

On 06-07-2011 6:46, Nicolas Pitre wrote:

> The boot_params member of the mdesc structure is used to provide a
> default physical address for the ATAG list.  Since this value is fixed
> at compile time and often based on ARCH_PHYS_OFFSET, it gets in the way
> of runtime PHYS_OFFSET usage.

> Let's introduce atag_offset which should contains only the relative
> offset from start of memory instead of an absolute value, in preparation
> to move all instance of boot_params over to it.

> Signed-off-by: Nicolas Pitre<nicolas.pitre@linaro.org>
[...]

> diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
> index e0db84d..4cc3e2b 100644
> --- a/arch/arm/kernel/setup.c
> +++ b/arch/arm/kernel/setup.c
> @@ -816,6 +816,8 @@ static struct machine_desc * __init setup_machine_tags(unsigned int nr)
>
>   	if (__atags_pointer)
>   		tags = phys_to_virt(__atags_pointer);
> +	else if(mdesc->atag_offset)

    Should be space after *if* -- checkpatch.pl should have complained.

WBR, Sergei

[PATCH 01/52] ARM: introduce atag_offset to replace boot_params

[Nicolas Pitre]

On Thu, 7 Jul 2011, Sergei Shtylyov wrote:

> Hello.
> 
> On 06-07-2011 6:46, Nicolas Pitre wrote:
> 
> > The boot_params member of the mdesc structure is used to provide a
> > default physical address for the ATAG list.  Since this value is fixed
> > at compile time and often based on ARCH_PHYS_OFFSET, it gets in the way
> > of runtime PHYS_OFFSET usage.
> 
> > Let's introduce atag_offset which should contains only the relative
> > offset from start of memory instead of an absolute value, in preparation
> > to move all instance of boot_params over to it.
> 
> > Signed-off-by: Nicolas Pitre<nicolas.pitre@linaro.org>
> [...]
> 
> > diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
> > index e0db84d..4cc3e2b 100644
> > --- a/arch/arm/kernel/setup.c
> > +++ b/arch/arm/kernel/setup.c
> > @@ -816,6 +816,8 @@ static struct machine_desc * __init
> > setup_machine_tags(unsigned int nr)
> > 
> >   	if (__atags_pointer)
> >   		tags = phys_to_virt(__atags_pointer);
> > +	else if(mdesc->atag_offset)
> 
>    Should be space after *if* -- checkpatch.pl should have complained.

Indeed, thanks.


Nicolas

[PATCH 01/52] ARM: introduce atag_offset to replace boot_params

[Arnd Bergmann]

On Wednesday 06 July 2011, Nicolas Pitre wrote:
> The boot_params member of the mdesc structure is used to provide a
> default physical address for the ATAG list.  Since this value is fixed
> at compile time and often based on ARCH_PHYS_OFFSET, it gets in the way
> of runtime PHYS_OFFSET usage.
> 
> Let's introduce atag_offset which should contains only the relative
> offset from start of memory instead of an absolute value, in preparation
> to move all instance of boot_params over to it.
> 
> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

The series looks to me. Feel free to add my Acked-by everywhere
and/or push to a branch of the arm-soc tree when you're ready.

	Arnd

[PATCH 01/52] ARM: introduce atag_offset to replace boot_params

[Russell King - ARM Linux]

On Tue, Jul 05, 2011 at 10:46:46PM -0400, Nicolas Pitre wrote:
> The boot_params member of the mdesc structure is used to provide a
> default physical address for the ATAG list.  Since this value is fixed
> at compile time and often based on ARCH_PHYS_OFFSET, it gets in the way
> of runtime PHYS_OFFSET usage.
> 
> Let's introduce atag_offset which should contains only the relative
> offset from start of memory instead of an absolute value, in preparation
> to move all instance of boot_params over to it.

I don't like this.

While I understand the issue (the oops when we try to dereference the
absolute address), the fact is that's how it is.

Take a moment to think about this.  The ATAG list is normally setup at a
fixed physical address by the boot loader.  While there are some boot
loaders which allow you to load the kernel at different physical addresses,
they still place the ATAG list at that same physical address.

That means if you change this into an offset from the kernels idea of
PHYS_OFFSET, it's not going to find the ATAGs.

So we're probably better off checking whether the platform provided ATAG
pointer is below our idea of PHYS_OFFSET, and if it is to ignore that.
The ultimate effect will be the same - the kernel won't find the ATAGs
and won't crash instead.  And no need for all this churn either.

[PATCH 01/52] ARM: introduce atag_offset to replace boot_params

[Nicolas Pitre]

On Fri, 8 Jul 2011, Russell King - ARM Linux wrote:

> On Tue, Jul 05, 2011 at 10:46:46PM -0400, Nicolas Pitre wrote:
> > The boot_params member of the mdesc structure is used to provide a
> > default physical address for the ATAG list.  Since this value is fixed
> > at compile time and often based on ARCH_PHYS_OFFSET, it gets in the way
> > of runtime PHYS_OFFSET usage.
> > 
> > Let's introduce atag_offset which should contains only the relative
> > offset from start of memory instead of an absolute value, in preparation
> > to move all instance of boot_params over to it.
> 
> I don't like this.
> 
> While I understand the issue (the oops when we try to dereference the
> absolute address), the fact is that's how it is.
> 
> Take a moment to think about this.  The ATAG list is normally setup at a
> fixed physical address by the boot loader.  While there are some boot
> loaders which allow you to load the kernel at different physical addresses,
> they still place the ATAG list at that same physical address.

Would they really load the kernel at a different address?

> That means if you change this into an offset from the kernels idea of
> PHYS_OFFSET, it's not going to find the ATAGs.

Is this going to be a real issue in practice?

> So we're probably better off checking whether the platform provided ATAG
> pointer is below our idea of PHYS_OFFSET, and if it is to ignore that.

The code already does that.

Alternatively, I can make the boot_params values into numeric values 
instead of PLAT_PHYS_OFFSET or any other symbolic define I'd like to get 
rid of.  What do you think?


Nicolas

[PATCH 01/52] ARM: introduce atag_offset to replace boot_params

[Nicolas Pitre]

On Fri, 8 Jul 2011, Nicolas Pitre wrote:

> On Fri, 8 Jul 2011, Russell King - ARM Linux wrote:
> 
> > On Tue, Jul 05, 2011 at 10:46:46PM -0400, Nicolas Pitre wrote:
> > > The boot_params member of the mdesc structure is used to provide a
> > > default physical address for the ATAG list.  Since this value is fixed
> > > at compile time and often based on ARCH_PHYS_OFFSET, it gets in the way
> > > of runtime PHYS_OFFSET usage.
> > > 
> > > Let's introduce atag_offset which should contains only the relative
> > > offset from start of memory instead of an absolute value, in preparation
> > > to move all instance of boot_params over to it.
> > 
> > I don't like this.
> > 
> > While I understand the issue (the oops when we try to dereference the
> > absolute address), the fact is that's how it is.
> > 
> > Take a moment to think about this.  The ATAG list is normally setup at a
> > fixed physical address by the boot loader.  While there are some boot
> > loaders which allow you to load the kernel at different physical addresses,
> > they still place the ATAG list at that same physical address.
> 
> Would they really load the kernel at a different address?
> 
> > That means if you change this into an offset from the kernels idea of
> > PHYS_OFFSET, it's not going to find the ATAGs.
> 
> Is this going to be a real issue in practice?
> 
> > So we're probably better off checking whether the platform provided ATAG
> > pointer is below our idea of PHYS_OFFSET, and if it is to ignore that.
> 
> The code already does that.
> 
> Alternatively, I can make the boot_params values into numeric values 
> instead of PLAT_PHYS_OFFSET or any other symbolic define I'd like to get 
> rid of.  What do you think?

After looking at it some more, this can't work either as on ep93xx the 
RAM offset is currently selected a kernel config time and we do want to 
get rid of that.

Furthermore, the code in setup_machine_tags() always validates the atags 
pointer with ATAG_CORE and assigns it the address of init_tags 
otherwise.  Given that the atag offset is always within the first 
megabyte which is always mapped, the kernel won't crash even if the 
ATAGs are not there.


Nicolas

[PATCH 01/52] ARM: introduce atag_offset to replace boot_params

[H Hartley Sweeten]

On Monday, July 11, 2011 7:59 AM, Nicolas Pitre wrote:
> After looking at it some more, this can't work either as on ep93xx the 
> RAM offset is currently selected a kernel config time and we do want to 
> get rid of that.

The ep93xx actually uses the same relative offset for the boot_params (+0x100)
for all memory configurations.  The issue is the base physical address of the
system memory.

There are four sdram chip selects available on the ep93xx.  These, along with
the ASDO boot option pin, define the base address for the sdram.

nSDCS3, ASDO=1	0x00000000
nSDCS3, ASDO=0	0xf0000000
nSDCS2, ASDO=x	0xe0000000
nSDCS1, ASDO=x	0xd0000000
nSDCS0, ASDO=x	0xc0000000

Unfortunately, all the ep93xx boards I have are designed with the sdram using
nSDCS0 so I can't test the other boot configurations.

Regardless, with these patches, and having ARM_PATCH_PHYS_VIRT enabled, I am
able to boot all of my boards successfully.

The EDB9315 dev board can be jumper selected so that the sdram is connected
to either nSDSC0 or nSDCS3 (default).

The EDB9312 dev board can be jumper selected to use any of the chip selects
for the sdram.

If anyone has access to either of these boards and could test these patches
it would be a great help.

Before the ARM_PATCH_PHYS_VIRT patch the Kconfig options to select the
"EP93xx first SDRAM bank selection" was needed to limit the board selections
so that only board which shared an SDRAM chip select configuration could be
selected.  With ARM_PATCH_PHYS_VIRT I don't think this is needed any longer.

But, if the boot_params are still going to be used, the bank selection is still
needed so that the physical address of the boot_params is correct.  Changing it
to an atag_offset makes it work on the ep93xx.

Just my 2 cents....

Regards,
Hartley

[PATCH 01/52] ARM: introduce atag_offset to replace boot_params

[Petr Štetiar]

H Hartley Sweeten <hartleys@visionengravers.com> [2011-07-11 12:17:25]:

> Unfortunately, all the ep93xx boards I have are designed with the sdram using
> nSDCS0 so I can't test the other boot configurations.

I've tested that actual patchset from nico/redux git branch[1,2] on
ts-7250/32M and ts-7300/128M (both nSDCS3) and it boots, so you can add my
tested-by if you like:

Tested-by: Petr ?tetiar <ynezz@true.cz>

1. git://git.linaro.org/people/nico/linux.git redux
2. git hash bc869e434e411ee7f3fcfed7594ee64b1d56b3c9

-- ynezz

[PATCH 01/52] ARM: introduce atag_offset to replace boot_params

[H Hartley Sweeten]

On Tuesday, July 12, 2011 1:48 PM, Petr ?tetiar wrote:
> H Hartley Sweeten <hartleys@visionengravers.com> [2011-07-11 12:17:25]:
>
>> Unfortunately, all the ep93xx boards I have are designed with the sdram using
>> nSDCS0 so I can't test the other boot configurations.
>
> I've tested that actual patchset from nico/redux git branch[1,2] on
> ts-7250/32M and ts-7300/128M (both nSDCS3) and it boots, so you can add my
> tested-by if you like:
> 
> Tested-by: Petr ?tetiar <ynezz@true.cz>
> 
> 1. git://git.linaro.org/people/nico/linux.git redux
> 2. git hash bc869e434e411ee7f3fcfed7594ee64b1d56b3c9

So, I guess the big test would be to see if a kernel that boots on your boards
using nSDCS3 will also boot on mine using nSDCS0.

Could you rebuild your kernel with MACH_EDB9307A also selected in your
config?  After verifying that it still boots please either send me the zImage
or place it somewhere I can grab it and I will make sure it boots on mine.

Regards,
Hartley

[PATCH 01/52] ARM: introduce atag_offset to replace boot_params

[Petr Štetiar]

H Hartley Sweeten <hartleys@visionengravers.com> [2011-07-12 16:39:47]:

> Could you rebuild your kernel with MACH_EDB9307A also selected in your
> config?  After verifying that it still boots please either send me the zImage
> or place it somewhere I can grab it and I will make sure it boots on mine.

Verified, kernel[1,2] boots. Source tree[3] used to build it (including config etc).

1. http://ynezz.true.cz/redux/zImage 
2. http://ynezz.true.cz/redux/zImage.md5sum 
3. https://github.com/ynezz/linux-2.6/commits/test-redux

-- ynezz

[PATCH 01/52] ARM: introduce atag_offset to replace boot_params

[H Hartley Sweeten]

On Thursday, July 14, 2011 11:49 PM, Petr ?tetiar wrote:
> H Hartley Sweeten <hartleys@visionengravers.com> [2011-07-12 16:39:47]:
>
>> Could you rebuild your kernel with MACH_EDB9307A also selected in your
>> config?  After verifying that it still boots please either send me the zImage
>> or place it somewhere I can grab it and I will make sure it boots on mine.
>
> Verified, kernel[1,2] boots. Source tree[3] used to build it (including config etc).
>
> 1. http://ynezz.true.cz/redux/zImage 
> 2. http://ynezz.true.cz/redux/zImage.md5sum 
> 3. https://github.com/ynezz/linux-2.6/commits/test-redux

Well... Partial success...

The kernel does boot, but then panic's when trying to mount the root fs.

All my development boards are setup to pull the rootfs from a tftp server
and then use root=/dev/ram as the rootfs.  This kernel must be missing something
for that to work.

Regardless, the kernel _does_ boot so the phys offset is correctly being
worked out at run-time and the memory configuration looks correct so the
atags offset must be working.

So, as far as the ep39xx goes, for this patchset you can have either of these:

Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>

Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>

Regards,
Hartley

[PATCH 01/52] ARM: introduce atag_offset to replace boot_params

[Nicolas Pitre]

On Fri, 15 Jul 2011, H Hartley Sweeten wrote:

> On Thursday, July 14, 2011 11:49 PM, Petr ?tetiar wrote:
> > H Hartley Sweeten <hartleys@visionengravers.com> [2011-07-12 16:39:47]:
> >
> >> Could you rebuild your kernel with MACH_EDB9307A also selected in your
> >> config?  After verifying that it still boots please either send me the zImage
> >> or place it somewhere I can grab it and I will make sure it boots on mine.
> >
> > Verified, kernel[1,2] boots. Source tree[3] used to build it (including config etc).
> >
> > 1. http://ynezz.true.cz/redux/zImage 
> > 2. http://ynezz.true.cz/redux/zImage.md5sum 
> > 3. https://github.com/ynezz/linux-2.6/commits/test-redux
> 
> Well... Partial success...
> 
> The kernel does boot, but then panic's when trying to mount the root fs.
> 
> All my development boards are setup to pull the rootfs from a tftp server
> and then use root=/dev/ram as the rootfs.  This kernel must be missing something
> for that to work.
> 
> Regardless, the kernel _does_ boot so the phys offset is correctly being
> worked out at run-time and the memory configuration looks correct so the
> atags offset must be working.
> 
> So, as far as the ep39xx goes, for this patchset you can have either of these:
> 
> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
> 
> Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>

Thanks a lot for the testing.  This validates the basic concept.


Nicolas

[PATCH 01/52] ARM: introduce atag_offset to replace boot_params

[Nicolas Pitre]

On Tue, 12 Jul 2011, Petr ?tetiar wrote:

> H Hartley Sweeten <hartleys@visionengravers.com> [2011-07-11 12:17:25]:
> 
> > Unfortunately, all the ep93xx boards I have are designed with the sdram using
> > nSDCS0 so I can't test the other boot configurations.
> 
> I've tested that actual patchset from nico/redux git branch[1,2] on
> ts-7250/32M and ts-7300/128M (both nSDCS3) and it boots, so you can add my
> tested-by if you like:
> 
> Tested-by: Petr ?tetiar <ynezz@true.cz>

Thanks.


Nicolas