From: nicolas.pitre@linaro.org (Nicolas Pitre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 07/52] ARM: mach-ep93xx: convert boot_params to atag_offset
Date: Tue, 05 Jul 2011 22:46:52 -0400 [thread overview]
Message-ID: <1309920457-21913-7-git-send-email-nicolas.pitre@linaro.org> (raw)
In-Reply-To: <1309920457-21913-1-git-send-email-nicolas.pitre@linaro.org>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
---
arch/arm/mach-ep93xx/adssphere.c | 2 +-
arch/arm/mach-ep93xx/edb93xx.c | 16 ++++++++--------
arch/arm/mach-ep93xx/gesbc9312.c | 2 +-
arch/arm/mach-ep93xx/micro9.c | 8 ++++----
arch/arm/mach-ep93xx/simone.c | 2 +-
arch/arm/mach-ep93xx/snappercl15.c | 2 +-
arch/arm/mach-ep93xx/ts72xx.c | 2 +-
7 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 61b98ce..0713448 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -33,7 +33,7 @@ static void __init adssphere_init_machine(void)
MACHINE_START(ADSSPHERE, "ADS Sphere board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 9969bb1..257175e 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -240,7 +240,7 @@ static void __init edb93xx_init_machine(void)
#ifdef CONFIG_MACH_EDB9301
MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -251,7 +251,7 @@ MACHINE_END
#ifdef CONFIG_MACH_EDB9302
MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
/* Maintainer: George Kashperko <george@chas.com.ua> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -262,7 +262,7 @@ MACHINE_END
#ifdef CONFIG_MACH_EDB9302A
MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -273,7 +273,7 @@ MACHINE_END
#ifdef CONFIG_MACH_EDB9307
MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -284,7 +284,7 @@ MACHINE_END
#ifdef CONFIG_MACH_EDB9307A
MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -295,7 +295,7 @@ MACHINE_END
#ifdef CONFIG_MACH_EDB9312
MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -306,7 +306,7 @@ MACHINE_END
#ifdef CONFIG_MACH_EDB9315
MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -317,7 +317,7 @@ MACHINE_END
#ifdef CONFIG_MACH_EDB9315A
MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 9bd3152..45ee205 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -33,7 +33,7 @@ static void __init gesbc9312_init_machine(void)
MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 7adea62..e72f736 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -77,7 +77,7 @@ static void __init micro9_init_machine(void)
#ifdef CONFIG_MACH_MICRO9H
MACHINE_START(MICRO9, "Contec Micro9-High")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -88,7 +88,7 @@ MACHINE_END
#ifdef CONFIG_MACH_MICRO9M
MACHINE_START(MICRO9M, "Contec Micro9-Mid")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -99,7 +99,7 @@ MACHINE_END
#ifdef CONFIG_MACH_MICRO9L
MACHINE_START(MICRO9L, "Contec Micro9-Lite")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -110,7 +110,7 @@ MACHINE_END
#ifdef CONFIG_MACH_MICRO9S
MACHINE_START(MICRO9S, "Contec Micro9-Slim")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index d96dc1c..ac66758 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -66,7 +66,7 @@ static void __init simone_init_machine(void)
MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
/* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index ac601fe..1b54039 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -163,7 +163,7 @@ static void __init snappercl15_init_machine(void)
MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
/* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index c2d2cf4..1ade3c3 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -257,7 +257,7 @@ static void __init ts72xx_init_machine(void)
MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ts72xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
--
1.7.4
next prev parent reply other threads:[~2011-07-06 2:46 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-06 2:46 [PATCH 01/52] ARM: introduce atag_offset to replace boot_params Nicolas Pitre
2011-07-06 2:46 ` [PATCH 02/52] ARM: mach-clps711x: convert boot_params to atag_offset Nicolas Pitre
2011-07-06 2:46 ` [PATCH 03/52] ARM: mach-cns3xxx: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 04/52] ARM: mach-davinci: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 05/52] ARM: mach-dove: convert boot-params " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 06/52] ARM: mach-ebsa110: convert boot_params " Nicolas Pitre
2011-07-06 2:46 ` Nicolas Pitre [this message]
2011-07-07 16:32 ` [PATCH 07/52] ARM: mach-ep93xx: " H Hartley Sweeten
2011-07-07 16:59 ` Nicolas Pitre
2011-07-07 17:20 ` H Hartley Sweeten
2011-07-07 18:20 ` Nicolas Pitre
2011-07-06 2:46 ` [PATCH 08/52] ARM: mach-exynos4: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 09/52] ARM: mach-footbridge: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 10/52] ARM: mach-gemini: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 11/52] ARM: mach-h720x: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 12/52] ARM: mach-imx: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 13/52] ARM: mach-integrator: " Nicolas Pitre
2011-07-06 2:46 ` [PATCH 14/52] ARM: mach-iop13xx: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 15/52] ARM: mach-iop32x: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 16/52] ARM: mach-iop33x: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 17/52] ARM: mach-ixp2000: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 18/52] ARM: mach-ixp23xx: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 19/52] ARM: mach-ixp4xx: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 20/52] ARM: mach-kirkwood: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 21/52] ARM: mach-ks8695: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 22/52] ARM: mach-loki: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 23/52] ARM: mach-lpc32xx: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 24/52] ARM: mach-msm: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 25/52] ARM: mach-mv78xx0: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 26/52] ARM: mach-mx5: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 27/52] ARM: mach-netx: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 28/52] ARM: mach-nomadik: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 29/52] ARM: mach-nuc93x: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 30/52] ARM: mach-omap1: " Nicolas Pitre
2011-07-07 14:28 ` Tony Lindgren
2011-07-06 2:47 ` [PATCH 31/52] ARM: mach-omap2: " Nicolas Pitre
2011-07-07 14:28 ` Tony Lindgren
2011-07-07 15:35 ` Nicolas Pitre
2011-07-06 2:47 ` [PATCH 32/52] ARM: mach-orion5x: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 33/52] ARM: mach-pnx4008: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 34/52] ARM: mach-pxa: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 35/52] ARM: mach-realview: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 36/52] ARM: mach-rpc: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 37/52] ARM: mach-s3c24*: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 38/52] ARM: mach-s5p64x0: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 39/52] ARM: mach-s3c64xx: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 40/52] ARM: mach-s5pc100, mach-s5pv210: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 41/52] ARM: mach-sa1100: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 42/52] ARM: mach-shark: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 43/52] ARM: mach-spear*: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 44/52] ARM: mach-tcc8k: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 45/52] ARM: mach-tegra: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 46/52] ARM: mach-u300: " Nicolas Pitre
2011-07-08 13:12 ` Linus Walleij
2011-07-08 21:20 ` Russell King - ARM Linux
2011-07-06 2:47 ` [PATCH 47/52] ARM: mach-ux500: convert boot-params " Nicolas Pitre
2011-07-08 13:18 ` Linus Walleij
2011-07-06 2:47 ` [PATCH 48/52] ARM: mach-versatile: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 49/52] ARM: vexpress: convert boot_params " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 50/52] ARM: mach-vt8500: " Nicolas Pitre
2011-07-06 2:47 ` [PATCH 51/52] ARM: mach-w90x900: remove useless boot_params entries Nicolas Pitre
2011-07-06 2:47 ` [PATCH 52/52] ARM: remove boot_params from struct machine_desc Nicolas Pitre
2011-07-06 4:28 ` [PATCH 01/52] ARM: introduce atag_offset to replace boot_params Stephen Boyd
2011-07-06 12:54 ` Nicolas Pitre
2011-07-06 17:59 ` Stephen Boyd
2011-07-07 0:43 ` H Hartley Sweeten
2011-07-07 4:04 ` Nicolas Pitre
2011-07-07 18:28 ` H Hartley Sweeten
2011-07-07 11:37 ` Sergei Shtylyov
2011-07-07 15:37 ` Nicolas Pitre
2011-07-07 15:45 ` Arnd Bergmann
2011-07-08 20:36 ` Russell King - ARM Linux
2011-07-08 21:20 ` Nicolas Pitre
2011-07-11 14:59 ` Nicolas Pitre
2011-07-11 17:17 ` H Hartley Sweeten
2011-07-12 20:48 ` Petr Štetiar
2011-07-12 21:39 ` H Hartley Sweeten
2011-07-15 6:48 ` Petr Štetiar
2011-07-15 22:40 ` H Hartley Sweeten
2011-07-16 2:44 ` Nicolas Pitre
2011-07-13 3:22 ` Nicolas Pitre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1309920457-21913-7-git-send-email-nicolas.pitre@linaro.org \
--to=nicolas.pitre@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).