From: robherring2@gmail.com (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/6] ARM: make mach/hardware.h optional
Date: Tue, 12 Jul 2011 11:53:26 -0500 [thread overview]
Message-ID: <1310489612-8625-1-git-send-email-robherring2@gmail.com> (raw)
From: Rob Herring <rob.herring@calxeda.com>
Currently, all ARM platforms must have a mach/hardware.h include. This is
because it is ultimately included by linux/pci.h which is included in many
places even for !CONFIG_PCI.
This could be fixed simply with an ifdef around the include of mach/hardware.h
in asm/pci.h. However, in the interest of fixing this for single kernel
binary builds, this series removes the include of mach/hardware.h outside of
mach-* and plat-*. What's used from hardware.h is a couple of PCI defines.
Converting them to variables allows each platform to set the values as needed.
This does not address the inclusion of mach/hardware.h under drivers/*. This
appears to be mostly older platforms. There could also be some indirect
inclusions from other mach/* headers.
I've compile tested on most affected ARM platforms.
Changes from v2:
- Incorporated compile fixes for microblaze from Michal Simek.
- Added conversion of powerpc to generic pci flag functions.
- Combined powerpc and microblaze conversion to use
asm-generic/pci-bridge.h into one commit. Renaming of powerpc pci
flags functions is separate commit.
- Changed defaults for PCIBIOS_MIN_IO and PCIBIOS_MIN_MEM to 0x1000 and
0x1000000, respectively.
- Dropped commit moving ARCH_HAS_DMA_SET_COHERENT_MASK defines into
memory.h. This conflicts with other clean-up work by Nicolas Pitre.
Changes from v1:
- Added patch 2 to move ARCH_HAS_DMA_SET_COHERENT_MASK defines into memory.h.
- Separated VGA changes and renamed to vga_base.
- Reverted mach/hardware.h removal from ecard.c. It's getting implicitly
included anyway.
Rob
Rob Herring (6):
powerpc: rename ppc_pci_*_flags to pci_*_flags
pci: move microblaze and powerpc pci flag functions into asm-generic
ARM: remove unnecessary mach/hardware.h includes
ARM: pci: make pcibios_assign_all_busses use pci_has_flag
ARM: convert PCI defines to variables
ARM: set vga memory base at run-time
arch/arm/include/asm/pci.h | 12 ++++-
arch/arm/include/asm/vga.h | 5 +-
arch/arm/lib/ecard.S | 1 -
arch/arm/lib/io-readsw-armv3.S | 1 -
arch/arm/lib/io-writesw-armv3.S | 1 -
arch/arm/mach-bcmring/include/mach/hardware.h | 2 -
arch/arm/mach-cns3xxx/cns3420vb.c | 1 -
arch/arm/mach-cns3xxx/include/mach/hardware.h | 22 -------
arch/arm/mach-cns3xxx/pcie.c | 3 +
arch/arm/mach-dove/include/mach/hardware.h | 7 --
arch/arm/mach-dove/pcie.c | 3 +
arch/arm/mach-ep93xx/include/mach/hardware.h | 2 -
arch/arm/mach-footbridge/dc21285.c | 3 +
arch/arm/mach-footbridge/include/mach/hardware.h | 5 --
arch/arm/mach-integrator/include/mach/hardware.h | 7 --
arch/arm/mach-integrator/pci_v3.c | 5 ++
arch/arm/mach-iop13xx/include/mach/hardware.h | 7 --
arch/arm/mach-iop13xx/pci.c | 5 +-
arch/arm/mach-iop32x/include/mach/hardware.h | 3 -
arch/arm/mach-iop33x/include/mach/hardware.h | 3 -
arch/arm/mach-ixp2000/include/mach/hardware.h | 8 ---
arch/arm/mach-ixp2000/pci.c | 5 ++
arch/arm/mach-ixp23xx/include/mach/hardware.h | 4 -
arch/arm/mach-ixp23xx/pci.c | 5 ++
arch/arm/mach-ixp4xx/common-pci.c | 5 ++
arch/arm/mach-ixp4xx/include/mach/hardware.h | 5 --
arch/arm/mach-kirkwood/include/mach/hardware.h | 7 --
arch/arm/mach-kirkwood/pcie.c | 3 +
arch/arm/mach-ks8695/include/mach/hardware.h | 9 ---
arch/arm/mach-ks8695/pci.c | 3 +
arch/arm/mach-mv78xx0/include/mach/hardware.h | 7 --
arch/arm/mach-mv78xx0/pcie.c | 3 +
arch/arm/mach-orion5x/include/mach/hardware.h | 7 --
arch/arm/mach-orion5x/pci.c | 2 +
arch/arm/mach-pxa/cm-x2xx-pci.c | 3 +
arch/arm/mach-pxa/include/mach/hardware.h | 3 -
arch/arm/mach-sa1100/include/mach/hardware.h | 8 ---
arch/arm/mach-sa1100/pci-nanoengine.c | 3 +
arch/arm/mach-shark/include/mach/hardware.h | 6 --
arch/arm/mach-shark/pci.c | 12 +++-
arch/arm/mach-tegra/include/mach/hardware.h | 28 ---------
arch/arm/mach-tegra/include/mach/system.h | 1 -
arch/arm/mach-tegra/io.c | 1 -
arch/arm/mach-tegra/pcie.c | 2 +
arch/arm/mach-tegra/platsmp.c | 1 -
arch/arm/mach-versatile/include/mach/hardware.h | 6 --
arch/arm/mach-versatile/pci.c | 3 +
arch/arm/mm/iomap.c | 12 ++++
arch/arm/mm/proc-xsc3.S | 1 -
arch/arm/plat-iop/pci.c | 3 +
arch/microblaze/include/asm/pci-bridge.h | 67 +++------------------
arch/powerpc/include/asm/pci-bridge.h | 50 +----------------
arch/powerpc/include/asm/pci.h | 2 +-
arch/powerpc/kernel/pci-common.c | 22 ++++----
arch/powerpc/kernel/pci_32.c | 2 +-
arch/powerpc/kernel/pci_64.c | 4 +-
arch/powerpc/kernel/rtas_pci.c | 2 +-
arch/powerpc/platforms/40x/ep405.c | 2 +-
arch/powerpc/platforms/40x/ppc40x_simple.c | 2 +-
arch/powerpc/platforms/40x/walnut.c | 2 +-
arch/powerpc/platforms/44x/canyonlands.c | 2 +-
arch/powerpc/platforms/44x/ebony.c | 2 +-
arch/powerpc/platforms/44x/ppc44x_simple.c | 2 +-
arch/powerpc/platforms/44x/sam440ep.c | 2 +-
arch/powerpc/platforms/52xx/mpc52xx_pci.c | 2 +-
arch/powerpc/platforms/82xx/pq2.c | 2 +-
arch/powerpc/platforms/chrp/pci.c | 2 +-
arch/powerpc/platforms/powermac/pci.c | 6 +-
arch/powerpc/sysdev/fsl_pci.c | 4 +-
arch/powerpc/sysdev/grackle.c | 2 +-
arch/powerpc/sysdev/ppc4xx_pci.c | 2 +-
include/asm-generic/pci-bridge.h | 62 ++++++++++++++++++++
72 files changed, 198 insertions(+), 311 deletions(-)
delete mode 100644 arch/arm/mach-cns3xxx/include/mach/hardware.h
delete mode 100644 arch/arm/mach-tegra/include/mach/hardware.h
create mode 100644 include/asm-generic/pci-bridge.h
--
1.7.4.1
next reply other threads:[~2011-07-12 16:53 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-12 16:53 Rob Herring [this message]
2011-07-12 16:53 ` [PATCH 1/6] powerpc: rename ppc_pci_*_flags to pci_*_flags Rob Herring
2011-07-12 16:53 ` [PATCH 2/6] pci: move microblaze and powerpc pci flag functions into asm-generic Rob Herring
2011-07-12 16:53 ` [PATCH 3/6] ARM: remove unnecessary mach/hardware.h includes Rob Herring
2011-07-12 16:53 ` [PATCH 4/6] ARM: pci: make pcibios_assign_all_busses use pci_has_flag Rob Herring
2011-07-22 15:53 ` Jesse Barnes
2011-07-12 16:53 ` [PATCH 5/6] ARM: convert PCI defines to variables Rob Herring
2011-07-12 16:53 ` [PATCH 6/6] ARM: set vga memory base at run-time Rob Herring
2011-07-14 15:22 ` [PATCH v3 0/6] ARM: make mach/hardware.h optional Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1310489612-8625-1-git-send-email-robherring2@gmail.com \
--to=robherring2@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).