From: robherring2@gmail.com (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/6] pci: move microblaze and powerpc pci flag functions into asm-generic
Date: Tue, 12 Jul 2011 11:53:28 -0500 [thread overview]
Message-ID: <1310489612-8625-3-git-send-email-robherring2@gmail.com> (raw)
In-Reply-To: <1310489612-8625-1-git-send-email-robherring2@gmail.com>
From: Rob Herring <rob.herring@calxeda.com>
Move separate microblaze and powerpc pci flag functions pci_set_flags,
pci_add_flags, and pci_has_flag into asm-generic/pci-bridge.h so other
archs can use them.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Michal Simek <monstr@monstr.eu>
---
arch/microblaze/include/asm/pci-bridge.h | 67 ++++-------------------------
arch/powerpc/include/asm/pci-bridge.h | 50 +----------------------
include/asm-generic/pci-bridge.h | 62 +++++++++++++++++++++++++++
3 files changed, 73 insertions(+), 106 deletions(-)
create mode 100644 include/asm-generic/pci-bridge.h
diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h
index 746df91..4cae1d5 100644
--- a/arch/microblaze/include/asm/pci-bridge.h
+++ b/arch/microblaze/include/asm/pci-bridge.h
@@ -10,31 +10,19 @@
#include <linux/pci.h>
#include <linux/list.h>
#include <linux/ioport.h>
+#include <asm-generic/pci-bridge.h>
struct device_node;
-enum {
- /* Force re-assigning all resources (ignore firmware
- * setup completely)
- */
- PCI_REASSIGN_ALL_RSRC = 0x00000001,
-
- /* Re-assign all bus numbers */
- PCI_REASSIGN_ALL_BUS = 0x00000002,
-
- /* Do not try to assign, just use existing setup */
- PCI_PROBE_ONLY = 0x00000004,
-
- /* Don't bother with ISA alignment unless the bridge has
- * ISA forwarding enabled
- */
- PCI_CAN_SKIP_ISA_ALIGN = 0x00000008,
-
- /* Enable domain numbers in /proc */
- PCI_ENABLE_PROC_DOMAINS = 0x00000010,
- /* ... except for domain 0 */
- PCI_COMPAT_DOMAIN_0 = 0x00000020,
-};
+#ifdef CONFIG_PCI
+extern struct list_head hose_list;
+extern int pcibios_vaddr_is_ioport(void __iomem *address);
+#else
+static inline int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+ return 0;
+}
+#endif
/*
* Structure of a PCI controller (host bridge)
@@ -164,40 +152,5 @@ extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
extern void pcibios_free_controller(struct pci_controller *phb);
extern void pcibios_setup_phb_resources(struct pci_controller *hose);
-#ifdef CONFIG_PCI
-extern unsigned int pci_flags;
-
-static inline void pci_set_flags(int flags)
-{
- pci_flags = flags;
-}
-
-static inline void pci_add_flags(int flags)
-{
- pci_flags |= flags;
-}
-
-static inline int pci_has_flag(int flag)
-{
- return pci_flags & flag;
-}
-
-extern struct list_head hose_list;
-
-extern int pcibios_vaddr_is_ioport(void __iomem *address);
-#else
-static inline int pcibios_vaddr_is_ioport(void __iomem *address)
-{
- return 0;
-}
-
-static inline void pci_set_flags(int flags) { }
-static inline void pci_add_flags(int flags) { }
-static inline int pci_has_flag(int flag)
-{
- return 0;
-}
-#endif /* CONFIG_PCI */
-
#endif /* __KERNEL__ */
#endif /* _ASM_MICROBLAZE_PCI_BRIDGE_H */
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index b3a40c3..8a9cb9f 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -10,58 +10,10 @@
#include <linux/pci.h>
#include <linux/list.h>
#include <linux/ioport.h>
+#include <asm-generic/pci-bridge.h>
struct device_node;
-enum {
- /* Force re-assigning all resources (ignore firmware
- * setup completely)
- */
- PCI_REASSIGN_ALL_RSRC = 0x00000001,
-
- /* Re-assign all bus numbers */
- PCI_REASSIGN_ALL_BUS = 0x00000002,
-
- /* Do not try to assign, just use existing setup */
- PCI_PROBE_ONLY = 0x00000004,
-
- /* Don't bother with ISA alignment unless the bridge has
- * ISA forwarding enabled
- */
- PCI_CAN_SKIP_ISA_ALIGN = 0x00000008,
-
- /* Enable domain numbers in /proc */
- PCI_ENABLE_PROC_DOMAINS = 0x00000010,
- /* ... except for domain 0 */
- PCI_COMPAT_DOMAIN_0 = 0x00000020,
-};
-#ifdef CONFIG_PCI
-extern unsigned int pci_flags;
-
-static inline void pci_set_flags(int flags)
-{
- pci_flags = flags;
-}
-
-static inline void pci_add_flags(int flags)
-{
- pci_flags |= flags;
-}
-
-static inline int pci_has_flag(int flag)
-{
- return (pci_flags & flag);
-}
-#else
-static inline void pci_set_flags(int flags) { }
-static inline void pci_add_flags(int flags) { }
-static inline int pci_has_flag(int flag)
-{
- return 0;
-}
-#endif
-
-
/*
* Structure of a PCI controller (host bridge)
*/
diff --git a/include/asm-generic/pci-bridge.h b/include/asm-generic/pci-bridge.h
new file mode 100644
index 0000000..4a5aca2
--- /dev/null
+++ b/include/asm-generic/pci-bridge.h
@@ -0,0 +1,62 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_GENERIC_PCI_BRIDGE_H
+#define _ASM_GENERIC_PCI_BRIDGE_H
+
+#ifdef __KERNEL__
+
+enum {
+ /* Force re-assigning all resources (ignore firmware
+ * setup completely)
+ */
+ PCI_REASSIGN_ALL_RSRC = 0x00000001,
+
+ /* Re-assign all bus numbers */
+ PCI_REASSIGN_ALL_BUS = 0x00000002,
+
+ /* Do not try to assign, just use existing setup */
+ PCI_PROBE_ONLY = 0x00000004,
+
+ /* Don't bother with ISA alignment unless the bridge has
+ * ISA forwarding enabled
+ */
+ PCI_CAN_SKIP_ISA_ALIGN = 0x00000008,
+
+ /* Enable domain numbers in /proc */
+ PCI_ENABLE_PROC_DOMAINS = 0x00000010,
+ /* ... except for domain 0 */
+ PCI_COMPAT_DOMAIN_0 = 0x00000020,
+};
+
+#ifdef CONFIG_PCI
+extern unsigned int pci_flags;
+
+static inline void pci_set_flags(int flags)
+{
+ pci_flags = flags;
+}
+
+static inline void pci_add_flags(int flags)
+{
+ pci_flags |= flags;
+}
+
+static inline int pci_has_flag(int flag)
+{
+ return pci_flags & flag;
+}
+#else
+static inline void pci_set_flags(int flags) { }
+static inline void pci_add_flags(int flags) { }
+static inline int pci_has_flag(int flag)
+{
+ return 0;
+}
+#endif /* CONFIG_PCI */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_GENERIC_PCI_BRIDGE_H */
--
1.7.4.1
next prev parent reply other threads:[~2011-07-12 16:53 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-12 16:53 [PATCH v3 0/6] ARM: make mach/hardware.h optional Rob Herring
2011-07-12 16:53 ` [PATCH 1/6] powerpc: rename ppc_pci_*_flags to pci_*_flags Rob Herring
2011-07-12 16:53 ` Rob Herring [this message]
2011-07-12 16:53 ` [PATCH 3/6] ARM: remove unnecessary mach/hardware.h includes Rob Herring
2011-07-12 16:53 ` [PATCH 4/6] ARM: pci: make pcibios_assign_all_busses use pci_has_flag Rob Herring
2011-07-22 15:53 ` Jesse Barnes
2011-07-12 16:53 ` [PATCH 5/6] ARM: convert PCI defines to variables Rob Herring
2011-07-12 16:53 ` [PATCH 6/6] ARM: set vga memory base at run-time Rob Herring
2011-07-14 15:22 ` [PATCH v3 0/6] ARM: make mach/hardware.h optional Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1310489612-8625-3-git-send-email-robherring2@gmail.com \
--to=robherring2@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).