From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] mtd: dataflash: add device tree probe support
Date: Thu, 14 Jul 2011 23:52:37 +0800 [thread overview]
Message-ID: <1310658757-17018-1-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1310283313-32087-1-git-send-email-shawn.guo@linaro.org>
It adds device tree probe support for mtd_dataflash driver.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
Changes since v1:
* Add "atmel,at45xxx" into the match table
* Add binding document
.../devicetree/bindings/mtd/atmel-dataflash.txt | 14 ++++++++++++++
drivers/mtd/devices/mtd_dataflash.c | 13 ++++++++++++-
2 files changed, 26 insertions(+), 1 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/atmel-dataflash.txt
diff --git a/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt b/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt
new file mode 100644
index 0000000..3783962
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt
@@ -0,0 +1,14 @@
+* Atmel Data Flash
+
+Required properties:
+- compatible : "atmel,<model>", "atmel,<series>", "atmel,dataflash".
+
+Example:
+
+flash at 1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45db321d", "atmel,at45xxx", "atmel,dataflash";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+};
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 8f6b02c..8e091b0 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -24,6 +24,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
/*
* DataFlash is a kind of SPI flash. Most AT45 chips have two buffers in
@@ -98,6 +100,12 @@ struct dataflash {
struct mtd_info mtd;
};
+static const struct of_device_id dataflash_dt_ids[] = {
+ { .compatible = "atmel,at45xxx", },
+ { .compatible = "atmel,dataflash", },
+ { /* sentinel */ }
+};
+
/* ......................................................................... */
/*
@@ -634,6 +642,7 @@ add_dataflash_otp(struct spi_device *spi, char *name,
{
struct dataflash *priv;
struct mtd_info *device;
+ struct mtd_part_parser_data ppdata;
struct flash_platform_data *pdata = spi->dev.platform_data;
char *otp_tag = "";
int err = 0;
@@ -675,7 +684,8 @@ add_dataflash_otp(struct spi_device *spi, char *name,
pagesize, otp_tag);
dev_set_drvdata(&spi->dev, priv);
- err = mtd_device_parse_register(device, NULL, 0,
+ ppdata.of_node = spi->dev.of_node;
+ err = mtd_device_parse_register(device, NULL, &ppdata,
pdata ? pdata->parts : NULL,
pdata ? pdata->nr_parts : 0);
@@ -926,6 +936,7 @@ static struct spi_driver dataflash_driver = {
.name = "mtd_dataflash",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
+ .of_match_table = dataflash_dt_ids,
},
.probe = dataflash_probe,
--
1.7.4.1
next prev parent reply other threads:[~2011-07-14 15:52 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-10 7:35 [PATCH] mtd: dataflash: add device tree probe support Shawn Guo
2011-07-14 15:52 ` Shawn Guo [this message]
2011-07-14 17:10 ` [PATCH v2] " Mike Frysinger
2011-07-14 17:52 ` Dmitry Eremin-Solenikov
2011-07-15 2:54 ` Grant Likely
2011-07-15 4:42 ` Shawn Guo
2011-07-15 2:54 ` Grant Likely
2011-07-15 4:49 ` Shawn Guo
2011-07-20 4:40 ` Artem Bityutskiy
2011-07-20 4:55 ` Shawn Guo
2011-07-20 5:17 ` Artem Bityutskiy
2011-07-20 5:28 ` Shawn Guo
2011-07-20 5:32 ` Artem Bityutskiy
2011-07-20 5:38 ` Mike Frysinger
2011-07-20 5:52 ` Shawn Guo
2011-07-20 5:52 ` Artem Bityutskiy
2011-07-15 8:38 ` [PATCH v3] " Shawn Guo
2011-07-20 4:51 ` Artem Bityutskiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1310658757-17018-1-git-send-email-shawn.guo@linaro.org \
--to=shawn.guo@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).