From: vishwanath.bs@ti.com (Vishwanath BS)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHV2] OMAP4: OPP: add OMAP4460 definitions
Date: Thu, 21 Jul 2011 10:24:30 +0530 [thread overview]
Message-ID: <1311224070-14149-1-git-send-email-vishwanath.bs@ti.com> (raw)
In-Reply-To: <yes>
From: Sripathy, Vishwanath <vishwanath.bs@ti.com>
Add OMAP4460 OPP definitions for voltage and frequencies based on
OMAP4460 ES1.0 DM Operating Condition Addendum Version 0.1
The following exceptions are present:
* Smartreflex support is still on experimental mode: the gains and min
limits are currently pending characterization data. Currently OMAP4430 values
are used.
* Efuse offset for core OPP100-OV setting is not clear in documentation.
* IVA OPPs beyond OPP100 are disabled due to the delta between max OMAP4460
current requirements and Phoenix Max supply on VCORE2 in the default
configuration - boards which have supply which can support this should
explicitly call opp_enable and enable the same.
* MPU OPPs > OPPTURBO can easily be detected using a efuse burnt - currently
disabled pending clock changes to support DCC feature.
[nm at ti.com: cleanups and updates from Datamanual]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Vishwanath BS <vishwanath.bs@ti.com>
---
Patch is generated against latest lo master.
Changes in V2: Updated the commit log as per Nishant's comments.
Patch has some checkpatch warnings related to line over 80 chars. They have
been retained to keep the readability of the code.
arch/arm/mach-omap2/control.h | 1 +
arch/arm/mach-omap2/omap_opp_data.h | 9 ++-
arch/arm/mach-omap2/opp4xxx_data.c | 96 ++++++++++++++++++++++---
arch/arm/mach-omap2/voltagedomains44xx_data.c | 14 +++-
4 files changed, 105 insertions(+), 15 deletions(-)
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index a016c8b..a41b9a7 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -195,6 +195,7 @@
#define OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO 0x249
#define OMAP44XX_CONTROL_FUSE_CORE_OPP50 0x254
#define OMAP44XX_CONTROL_FUSE_CORE_OPP100 0x257
+#define OMAP44XX_CONTROL_FUSE_CORE_OPP100OV 0x25A
/* AM35XX only CONTROL_GENERAL register offsets */
#define AM35XX_CONTROL_MSUSPENDMUX_6 (OMAP2_CONTROL_GENERAL + 0x0038)
diff --git a/arch/arm/mach-omap2/omap_opp_data.h b/arch/arm/mach-omap2/omap_opp_data.h
index c784c12..18a750e 100644
--- a/arch/arm/mach-omap2/omap_opp_data.h
+++ b/arch/arm/mach-omap2/omap_opp_data.h
@@ -89,8 +89,11 @@ extern struct omap_volt_data omap34xx_vddcore_volt_data[];
extern struct omap_volt_data omap36xx_vddmpu_volt_data[];
extern struct omap_volt_data omap36xx_vddcore_volt_data[];
-extern struct omap_volt_data omap44xx_vdd_mpu_volt_data[];
-extern struct omap_volt_data omap44xx_vdd_iva_volt_data[];
-extern struct omap_volt_data omap44xx_vdd_core_volt_data[];
+extern struct omap_volt_data omap443x_vdd_mpu_volt_data[];
+extern struct omap_volt_data omap443x_vdd_iva_volt_data[];
+extern struct omap_volt_data omap443x_vdd_core_volt_data[];
+extern struct omap_volt_data omap446x_vdd_mpu_volt_data[];
+extern struct omap_volt_data omap446x_vdd_iva_volt_data[];
+extern struct omap_volt_data omap446x_vdd_core_volt_data[];
#endif /* __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H */
diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c
index 2293ba2..8c285e4 100644
--- a/arch/arm/mach-omap2/opp4xxx_data.c
+++ b/arch/arm/mach-omap2/opp4xxx_data.c
@@ -1,7 +1,7 @@
/*
* OMAP4 OPP table definitions.
*
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
* Nishanth Menon
* Kevin Hilman
* Thara Gopinath
@@ -36,7 +36,7 @@
#define OMAP4430_VDD_MPU_OPPTURBO_UV 1313000
#define OMAP4430_VDD_MPU_OPPNITRO_UV 1375000
-struct omap_volt_data omap44xx_vdd_mpu_volt_data[] = {
+struct omap_volt_data omap443x_vdd_mpu_volt_data[] = {
VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16),
VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23),
@@ -48,7 +48,7 @@ struct omap_volt_data omap44xx_vdd_mpu_volt_data[] = {
#define OMAP4430_VDD_IVA_OPP100_UV 1188000
#define OMAP4430_VDD_IVA_OPPTURBO_UV 1300000
-struct omap_volt_data omap44xx_vdd_iva_volt_data[] = {
+struct omap_volt_data omap443x_vdd_iva_volt_data[] = {
VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP100_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP100, 0xf9, 0x16),
VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO, 0xfa, 0x23),
@@ -58,14 +58,14 @@ struct omap_volt_data omap44xx_vdd_iva_volt_data[] = {
#define OMAP4430_VDD_CORE_OPP50_UV 1025000
#define OMAP4430_VDD_CORE_OPP100_UV 1200000
-struct omap_volt_data omap44xx_vdd_core_volt_data[] = {
+struct omap_volt_data omap443x_vdd_core_volt_data[] = {
VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c),
VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP100_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100, 0xf9, 0x16),
VOLT_DATA_DEFINE(0, 0, 0, 0),
};
-static struct omap_opp_def __initdata omap44xx_opp_def_list[] = {
+static struct omap_opp_def __initdata omap443x_opp_def_list[] = {
/* MPU OPP1 - OPP50 */
OPP_INITIALIZER("mpu", true, 300000000, OMAP4430_VDD_MPU_OPP50_UV),
/* MPU OPP2 - OPP100 */
@@ -87,6 +87,82 @@ static struct omap_opp_def __initdata omap44xx_opp_def_list[] = {
/* TODO: add DSP, aess, fdif, gpu */
};
+#define OMAP4460_VDD_MPU_OPP50_UV 1025000
+#define OMAP4460_VDD_MPU_OPP100_UV 1200000
+#define OMAP4460_VDD_MPU_OPPTURBO_UV 1313000
+#define OMAP4460_VDD_MPU_OPPNITRO_UV 1375000
+
+struct omap_volt_data omap446x_vdd_mpu_volt_data[] = {
+ VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c),
+ VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16),
+ VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23),
+ VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27),
+ VOLT_DATA_DEFINE(0, 0, 0, 0),
+};
+
+#define OMAP4460_VDD_IVA_OPP50_UV 1025000
+#define OMAP4460_VDD_IVA_OPP100_UV 1200000
+#define OMAP4460_VDD_IVA_OPPTURBO_UV 1313000
+#define OMAP4460_VDD_IVA_OPPNITRO_UV 1375000
+
+struct omap_volt_data omap446x_vdd_iva_volt_data[] = {
+ VOLT_DATA_DEFINE(OMAP4460_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c),
+ VOLT_DATA_DEFINE(OMAP4460_VDD_IVA_OPP100_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP100, 0xf9, 0x16),
+ VOLT_DATA_DEFINE(OMAP4460_VDD_IVA_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO, 0xfa, 0x23),
+ VOLT_DATA_DEFINE(OMAP4460_VDD_IVA_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPNITRO, 0xfa, 0x23),
+ VOLT_DATA_DEFINE(0, 0, 0, 0),
+};
+
+#define OMAP4460_VDD_CORE_OPP50_UV 1025000
+#define OMAP4460_VDD_CORE_OPP100_UV 1200000
+#define OMAP4460_VDD_CORE_OPP100_OV_UV 1250000
+
+struct omap_volt_data omap446x_vdd_core_volt_data[] = {
+ VOLT_DATA_DEFINE(OMAP4460_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c),
+ VOLT_DATA_DEFINE(OMAP4460_VDD_CORE_OPP100_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100, 0xf9, 0x16),
+ VOLT_DATA_DEFINE(OMAP4460_VDD_CORE_OPP100_OV_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100OV, 0xf9, 0x16),
+ VOLT_DATA_DEFINE(0, 0, 0, 0),
+};
+
+static struct omap_opp_def __initdata omap446x_opp_def_list[] = {
+ /* MPU OPP1 - OPP50 */
+ OPP_INITIALIZER("mpu", true, 350000000, OMAP4460_VDD_MPU_OPP50_UV),
+ /* MPU OPP2 - OPP100 */
+ OPP_INITIALIZER("mpu", true, 700000000, OMAP4460_VDD_MPU_OPP100_UV),
+ /* MPU OPP3 - OPP-Turbo */
+ OPP_INITIALIZER("mpu", true, 920000000, OMAP4460_VDD_MPU_OPPTURBO_UV),
+ /*
+ * MPU OPP4 - OPP-Nitro + Disabled as the reference schematics
+ * recommends TPS623631 - confirm and enable the opp in board file
+ * XXX: May be we should enable these based on mpu capability and
+ * Exception board files disable it...
+ */
+ OPP_INITIALIZER("mpu", false, 1200000000, OMAP4460_VDD_MPU_OPPNITRO_UV),
+ /* MPU OPP4 - OPP-Nitro SpeedBin */
+ OPP_INITIALIZER("mpu", false, 1500000000, OMAP4460_VDD_MPU_OPPNITRO_UV),
+ /* L3 OPP1 - OPP50 */
+ OPP_INITIALIZER("l3_main_1", true, 100000000, OMAP4460_VDD_CORE_OPP50_UV),
+ /* L3 OPP2 - OPP100 */
+ OPP_INITIALIZER("l3_main_1", true, 200000000, OMAP4460_VDD_CORE_OPP100_UV),
+ /* IVA OPP1 - OPP50 */
+ OPP_INITIALIZER("iva", true, 133000000, OMAP4460_VDD_IVA_OPP50_UV),
+ /* IVA OPP2 - OPP100 */
+ OPP_INITIALIZER("iva", true, 266100000, OMAP4460_VDD_IVA_OPP100_UV),
+ /*
+ * IVA OPP3 - OPP-Turbo + Disabled as the reference schematics
+ * recommends Phoenix VCORE2 which can supply only 600mA - so the ones
+ * above this OPP frequency, even though OMAP is capable, should be
+ * enabled by board file which is sure of the chip power capability
+ */
+ OPP_INITIALIZER("iva", false, 332000000, OMAP4460_VDD_IVA_OPPTURBO_UV),
+ /* IVA OPP4 - OPP-Nitro */
+ OPP_INITIALIZER("iva", false, 430000000, OMAP4460_VDD_IVA_OPPNITRO_UV),
+ /* IVA OPP5 - OPP-Nitro SpeedBin*/
+ OPP_INITIALIZER("iva", false, 500000000, OMAP4460_VDD_IVA_OPPNITRO_UV),
+
+ /* TODO: add DSP, aess, fdif, gpu */
+};
+
/**
* omap4_opp_init() - initialize omap4 opp table
*/
@@ -96,10 +172,12 @@ int __init omap4_opp_init(void)
if (!cpu_is_omap44xx())
return r;
-
- r = omap_init_opp_table(omap44xx_opp_def_list,
- ARRAY_SIZE(omap44xx_opp_def_list));
-
+ if (cpu_is_omap443x())
+ r = omap_init_opp_table(omap443x_opp_def_list,
+ ARRAY_SIZE(omap443x_opp_def_list));
+ else if (cpu_is_omap446x())
+ r = omap_init_opp_table(omap446x_opp_def_list,
+ ARRAY_SIZE(omap446x_opp_def_list));
return r;
}
device_initcall(omap4_opp_init);
diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c
index cb64996..f516cfe 100644
--- a/arch/arm/mach-omap2/voltagedomains44xx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c
@@ -91,9 +91,17 @@ static int __init omap44xx_voltage_early_init(void)
* XXX Will depend on the process, validation, and binning
* for the currently-running IC
*/
- omap4_vdd_mpu_info.volt_data = omap44xx_vdd_mpu_volt_data;
- omap4_vdd_iva_info.volt_data = omap44xx_vdd_iva_volt_data;
- omap4_vdd_core_info.volt_data = omap44xx_vdd_core_volt_data;
+ if (cpu_is_omap443x()) {
+ omap4_vdd_mpu_info.volt_data = omap443x_vdd_mpu_volt_data;
+ omap4_vdd_iva_info.volt_data = omap443x_vdd_iva_volt_data;
+ omap4_vdd_core_info.volt_data = omap443x_vdd_core_volt_data;
+ } else if (cpu_is_omap446x()) {
+ omap4_vdd_mpu_info.volt_data = omap446x_vdd_mpu_volt_data;
+ omap4_vdd_iva_info.volt_data = omap446x_vdd_iva_volt_data;
+ omap4_vdd_core_info.volt_data = omap446x_vdd_core_volt_data;
+ } else {
+ return -ENODATA;
+ }
return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod,
omap4_vdd_info,
--
1.7.0.4
next prev parent reply other threads:[~2011-07-21 4:54 UTC|newest]
Thread overview: 95+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <yes>
2010-08-11 5:21 ` [PATCH v3] OpenRD: Enable SD/UART selection for serial port 1 Tanmay Upadhyay
2010-08-11 7:27 ` Russell King - ARM Linux
2011-06-15 0:46 ` [PATCH] Add ok2440 development board support Wu DaoGuang
2011-06-22 5:55 ` [PATCH 3/3 v2] ARM: pxa168: Add board support for gplugD Tanmay Upadhyay
2011-07-06 12:20 ` Daniel Mack
2011-07-06 12:44 ` Eric Miao
2011-07-21 4:54 ` Vishwanath BS [this message]
[not found] ` <4e27b0d0.100e8e0a.43e0.ffffe6d9SMTPIN_ADDED@mx.google.com>
2011-07-21 4:56 ` [PATCHV2] OMAP4: OPP: add OMAP4460 definitions Vishwanath Sripathy
2011-10-03 0:32 ` [PATCH 1/1] ARM: Make debug UART optional for S3C devices Thiago A. Correa
2011-10-10 14:44 ` Thiago A. Corrêa
2013-02-07 17:33 ` [PATCH 00/10] usb: ehci: more bus glues as separate modules manjunath.goudar at linaro.org
2013-02-07 20:13 ` Ezequiel Garcia
2013-02-08 15:23 ` Alan Stern
[not found] ` <1360258447-27247-1-git-send-email-yes>
2013-02-07 17:33 ` [PATCH 01/10] USB:Changed omap2plus_defconfig to support OMAP USB static driver manjunath.goudar at linaro.org
2013-02-07 17:33 ` [PATCH 02/10] USB: EHCI: make ehci-omap a separate driver manjunath.goudar at linaro.org
2013-02-08 7:42 ` Felipe Balbi
2013-02-08 8:56 ` Roger Quadros
2013-02-07 17:34 ` [PATCH 03/10] USB: EHCI: make ehci-spear " manjunath.goudar at linaro.org
2013-02-08 4:27 ` Viresh Kumar
2013-02-07 17:34 ` [PATCH 04/10] USB: EHCI: make ehci-orion " manjunath.goudar at linaro.org
2013-02-07 19:41 ` Arnd Bergmann
2013-02-08 10:38 ` Florian Fainelli
2013-02-07 17:34 ` [PATCH 05/10] USB: EHCI: make ehci-atmel " manjunath.goudar at linaro.org
2013-02-08 2:58 ` Bo Shen
2013-06-12 11:53 ` Jean-Christophe PLAGNIOL-VILLARD
2013-02-07 17:34 ` [PATCH 06/10] USB: EHCI: make ehci-s5p " manjunath.goudar at linaro.org
2013-02-07 18:49 ` Stephen Warren
2013-02-07 17:34 ` [PATCH 07/10] USB: EHCI: make ehci-mv " manjunath.goudar at linaro.org
2013-02-07 17:34 ` [PATCH 08/10] USB: EHCI: make ehci-vt8500 " manjunath.goudar at linaro.org
2013-02-07 18:54 ` Tony Prisk
2013-02-07 17:34 ` [PATCH 09/10] USB: EHCI: make ehci-msm " manjunath.goudar at linaro.org
2013-02-07 18:48 ` Stephen Warren
2013-02-07 19:05 ` David Brown
2013-02-07 17:34 ` [PATCH 10/10] USB: EHCI: make ehci-w90X900 " manjunath.goudar at linaro.org
2013-06-10 9:17 ` [PATCH v2 00/11] ARM:STixxxx: Add STixxxx platform and board support Srinivas KANDAGATLA
2013-06-10 9:21 ` [PATCH v2 01/11] serial:st-asc: Add ST ASC driver Srinivas KANDAGATLA
2013-06-10 9:35 ` Russell King - ARM Linux
2013-06-10 11:53 ` Srinivas KANDAGATLA
2013-06-10 9:21 ` [PATCH v2 02/11] clocksource:global_timer: Add ARM global timer support Srinivas KANDAGATLA
2013-06-10 13:13 ` Linus Walleij
2013-06-10 13:41 ` Srinivas KANDAGATLA
2013-06-11 14:05 ` Srinivas KANDAGATLA
2013-06-11 20:13 ` Linus Walleij
2013-06-12 10:45 ` Srinivas KANDAGATLA
2013-06-10 9:21 ` [PATCH v2 03/11] regmap: Add regmap_field APIs Srinivas KANDAGATLA
2013-06-11 10:48 ` Mark Brown
2013-06-11 11:36 ` Srinivas KANDAGATLA
2013-06-10 9:22 ` [PATCH v2 04/11] mfd:stixxxx-syscfg: Add ST System Configuration support Srinivas KANDAGATLA
2013-06-10 13:16 ` Linus Walleij
2013-06-10 13:52 ` Srinivas KANDAGATLA
2013-06-10 14:02 ` Arnd Bergmann
2013-06-10 15:51 ` Srinivas KANDAGATLA
2013-06-11 7:41 ` Srinivas KANDAGATLA
2013-06-10 9:22 ` [PATCH v2 05/11] pinctrl:stixxxx: Add pinctrl and pinconf support Srinivas KANDAGATLA
2013-06-16 12:17 ` Linus Walleij
2013-06-17 13:31 ` Srinivas KANDAGATLA
2013-06-17 16:27 ` Linus Walleij
2013-06-10 9:27 ` [PATCH v2 07/11] ARM:stixxxx: Add STiH416 SOC support Srinivas KANDAGATLA
2013-06-10 13:52 ` Arnd Bergmann
2013-06-10 16:17 ` Srinivas KANDAGATLA
2013-06-14 7:12 ` Srinivas KANDAGATLA
2013-06-19 18:34 ` Linus Walleij
2013-06-10 9:27 ` [PATCH v2 08/11] ARM:stixxxx: Add DEBUG_LL console support Srinivas KANDAGATLA
2013-06-10 9:27 ` [PATCH v2 09/11] ARM:stixxxx: Add stixxxx options to multi_v7_defconfig Srinivas KANDAGATLA
2013-06-10 10:40 ` Mark Rutland
2013-06-10 10:58 ` Srinivas KANDAGATLA
2013-06-10 13:15 ` Mark Rutland
2013-06-13 9:24 ` Srinivas KANDAGATLA
2013-06-17 9:32 ` Mark Rutland
2013-06-10 9:28 ` [PATCH v2 10/11] ARM:stih41x: Add B2000 board support Srinivas KANDAGATLA
2013-06-10 9:28 ` [PATCH v2 11/11] ARM:stih41x: Add B2020 " Srinivas KANDAGATLA
[not found] ` <1370856381-6644-1-git-send-email-srinivas.kandagatla@st.com>
2013-06-10 9:55 ` [PATCH v2 06/11] ARM:stixxxx: Add STiH415 SOC support Michal Simek
2013-06-10 11:08 ` Michal Simek
[not found] ` <CAHTX3d+dk3W_9b7SVUokWq4KYXnj=Z1=WPj5zJ-gUvJqqwE=+Q@mail.gmail.com>
2013-06-10 11:46 ` Srinivas KANDAGATLA
2013-06-10 23:19 ` Russell King - ARM Linux
2013-06-11 6:50 ` Srinivas KANDAGATLA
2013-06-13 11:56 ` Russell King - ARM Linux
2013-06-13 12:41 ` Srinivas KANDAGATLA
2013-06-13 12:47 ` Linus Walleij
2013-06-10 12:43 ` Linus Walleij
2013-06-10 16:38 ` Srinivas KANDAGATLA
2013-06-14 7:31 ` Srinivas KANDAGATLA
2013-06-19 18:59 ` Linus Walleij
2014-10-29 20:28 ` [PATCH v2 0/4] Enable PCI controller for Keystone SoCs Murali Karicheri
2014-10-29 20:28 ` [PATCH v2 1/4] ARM: keystone: add pcie related options Murali Karicheri
2014-10-29 20:28 ` [PATCH v2 2/4] ARM: keystone: defconfig: add options to enable PCI controller Murali Karicheri
2014-10-29 20:28 ` [PATCH v2 3/4] ARM: dts: keystone: add DT bindings for PCI controller for port 0 Murali Karicheri
2014-10-29 20:28 ` [PATCH v2 4/4] ARM: dts: keystone-k2e: add DT bindings for PCI controller for port 1 Murali Karicheri
2014-10-29 21:10 ` [PATCH v2 0/4] Enable PCI controller for Keystone SoCs santosh shilimkar
2011-05-02 5:59 ARM: pxa168: Add board support for gplugD Tanmay Upadhyay
2011-05-02 5:59 ` [PATCH 1/3] ARM: pxa168: Add support for UART3 Tanmay Upadhyay
2011-05-02 5:59 ` [PATCH 2/3] ARM: pxa168: Add support for Ethernet Tanmay Upadhyay
2011-06-10 13:31 ` Eric Miao
2011-05-02 6:00 ` [PATCH 3/3] ARM: pxa168: Add board support for gplugD Tanmay Upadhyay
2011-06-20 5:55 ` Eric Miao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1311224070-14149-1-git-send-email-vishwanath.bs@ti.com \
--to=vishwanath.bs@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).