From: b32955@freescale.com (Huang Shijie)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 3/3] MTD : add GPMI-NAND driver in the config and Makefile
Date: Thu, 21 Jul 2011 14:47:26 +0800 [thread overview]
Message-ID: <1311230846-26437-4-git-send-email-b32955@freescale.com> (raw)
In-Reply-To: <1311230846-26437-1-git-send-email-b32955@freescale.com>
add the GPMI-NAND driver in the relevant Kconfig and Makefile in the MTD.
Signed-off-by: Huang Shijie <b32955@freescale.com>
---
drivers/mtd/nand/Kconfig | 11 +++++++++++
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/gpmi-nand/Makefile | 3 +++
3 files changed, 15 insertions(+), 0 deletions(-)
create mode 100644 drivers/mtd/nand/gpmi-nand/Makefile
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 4c34252..97a1350 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -423,6 +423,17 @@ config MTD_NAND_NANDSIM
The simulator may simulate various NAND flash chips for the
MTD nand layer.
+config MTD_NAND_GPMI_NAND
+ bool "GPMI NAND Flash Controller driver"
+ depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28)
+ select MTD_PARTITIONS
+ select MTD_CMDLINE_PARTS
+ help
+ Enables NAND Flash support for IMX23 or IMX28.
+ The GPMI controller is very powerful, with the help of BCH
+ module, it can do the hardware ECC. The GPMI supports several
+ NAND flashs at the same time.
+
config MTD_NAND_PLATFORM
tristate "Support for generic platform NAND driver"
help
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 5745d83..b187f82 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -49,5 +49,6 @@ obj-$(CONFIG_MTD_NAND_BCM_UMI) += bcm_umi_nand.o nand_bcm_umi.o
obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
+obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/gpmi-nand/Makefile b/drivers/mtd/nand/gpmi-nand/Makefile
new file mode 100644
index 0000000..3a46248
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi_nand.o
+gpmi_nand-objs += gpmi-nand.o
+gpmi_nand-objs += gpmi-lib.o
--
1.7.0.4
next prev parent reply other threads:[~2011-07-21 6:47 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-21 6:47 [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28 Huang Shijie
2011-07-21 6:47 ` [PATCH v8 1/3] MTD : add the common code for GPMI-NAND controller driver Huang Shijie
2011-07-21 6:47 ` [PATCH v8 2/3] MTD : add helper functions library and header files for GPMI NAND driver Huang Shijie
2011-07-21 6:47 ` Huang Shijie [this message]
2011-07-21 21:50 ` [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28 Wolfram Sang
2011-07-22 3:30 ` Huang Shijie
2011-07-22 5:57 ` Shawn Guo
2011-07-22 8:07 ` Huang Shijie
2011-07-26 14:29 ` Koen Beel
2011-07-27 1:53 ` Huang Shijie
2011-07-28 9:38 ` Koen Beel
2011-07-29 7:20 ` Lothar Waßmann
2011-07-29 7:40 ` Koen Beel
2011-07-29 7:49 ` Lothar Waßmann
2011-07-29 9:49 ` Huang Shijie
2011-07-29 11:48 ` Koen Beel
2011-08-02 6:19 ` Huang Shijie
2011-08-02 7:16 ` Shawn Guo
2011-08-02 8:11 ` Shawn Guo
2011-08-02 8:12 ` Shawn Guo
2011-08-02 8:22 ` Huang Shijie
2011-07-29 12:41 ` Lothar Waßmann
2011-07-29 15:00 ` Koen Beel
2011-07-31 13:51 ` Marek Vasut
2011-08-01 15:14 ` Koen Beel
2011-08-02 6:37 ` Huang Shijie
2011-08-02 7:33 ` Koen Beel
2011-08-02 7:44 ` Huang Shijie
2011-08-02 8:55 ` Koen Beel
2011-08-02 8:49 ` Huang Shijie
2011-08-02 9:29 ` Koen Beel
2011-08-02 10:37 ` Huang Shijie
2011-08-02 12:32 ` Koen Beel
2011-08-02 6:21 ` Huang Shijie
2011-08-03 10:37 ` Wolfram Sang
2011-08-03 12:00 ` Koen Beel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1311230846-26437-4-git-send-email-b32955@freescale.com \
--to=b32955@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).