From mboxrd@z Thu Jan 1 00:00:00 1970 From: festevam@gmail.com (Fabio Estevam) Date: Mon, 25 Jul 2011 18:40:06 -0300 Subject: [PATCH v2] ARM: mx50: Select IMX_HAVE_PLATFORM_FEC as done on other i.MX devices Message-ID: <1311630006-7685-1-git-send-email-festevam@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Currently it is only the MX50_RDP board that selects IMX_HAVE_PLATFORM_FEC in its board Kconfig. Do like the other i.MX processors, which select IMX_HAVE_PLATFORM_FEC based on the processor type. Signed-off-by: Fabio Estevam --- Changes since v1: - Keep the processor list sorted arch/arm/mach-mx5/Kconfig | 1 - arch/arm/plat-mxc/devices/Kconfig | 2 +- 2 files changed, 1 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index b4e7c58..a303445 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -52,7 +52,6 @@ config MACH_MX50_RDP select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX - select IMX_HAVE_PLATFORM_FEC help Include support for MX50 reference design platform (RDP) board. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig index bd294ad..4c8b00b 100644 --- a/arch/arm/plat-mxc/devices/Kconfig +++ b/arch/arm/plat-mxc/devices/Kconfig @@ -1,6 +1,6 @@ config IMX_HAVE_PLATFORM_FEC bool - default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53 + default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX50 || SOC_IMX51 || SOC_IMX53 config IMX_HAVE_PLATFORM_FLEXCAN select HAVE_CAN_FLEXCAN if CAN -- 1.7.1