From: swarren@nvidia.com (Stephen Warren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] irq: If an IRQ is a GPIO, request and configure it
Date: Thu, 4 Aug 2011 17:00:18 -0600 [thread overview]
Message-ID: <1312498820-2275-2-git-send-email-swarren@nvidia.com> (raw)
In-Reply-To: <1312498820-2275-1-git-send-email-swarren@nvidia.com>
Many IRQs are associated with GPIO pins. When the pin is used as an IRQ,
it can't be used as anything else; it should be requested. Enhance the
core interrupt code to call gpio_request() and gpio_direction_input() for
any IRQ that is also a GPIO. This prevents duplication of these calls in
each driver that uses an IRQ.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
---
kernel/irq/manage.c | 23 +++++++++++++++++++++--
1 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 0a7840a..6e2db72 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -7,6 +7,7 @@
* This file contains driver APIs to the irq subsystem.
*/
+#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/kthread.h>
#include <linux/module.h>
@@ -875,7 +876,7 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
struct irqaction *old, **old_ptr;
const char *old_name = NULL;
unsigned long flags, thread_mask = 0;
- int ret, nested, shared = 0;
+ int ret, nested, shared = 0, gpio = -1;
cpumask_var_t mask;
if (!desc)
@@ -978,6 +979,16 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
old = *old_ptr;
} while (old);
shared = 1;
+ } else {
+ gpio = irq_to_gpio(irq);
+ if (gpio_is_valid(gpio)) {
+ ret = gpio_request(gpio, new->name);
+ if (ret < 0)
+ goto out_mask;
+ ret = gpio_direction_input(gpio);
+ if (ret < 0)
+ goto out_mask;
+ }
}
/*
@@ -1083,6 +1094,8 @@ mismatch:
ret = -EBUSY;
out_mask:
+ if (gpio_is_valid(gpio))
+ gpio_free(gpio);
raw_spin_unlock_irqrestore(&desc->lock, flags);
free_cpumask_var(mask);
@@ -1127,6 +1140,7 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id)
struct irq_desc *desc = irq_to_desc(irq);
struct irqaction *action, **action_ptr;
unsigned long flags;
+ int gpio;
WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
@@ -1165,8 +1179,13 @@ static struct irqaction *__free_irq(unsigned int irq, void *dev_id)
#endif
/* If this was the last handler, shut down the IRQ line: */
- if (!desc->action)
+ if (!desc->action) {
irq_shutdown(desc);
+ /* If the IRQ line is a GPIO, it's no longer in use */
+ gpio = irq_to_gpio(irq);
+ if (gpio_is_valid(gpio))
+ gpio_free(gpio);
+ }
#ifdef CONFIG_SMP
/* make sure affinity_hint is cleaned up */
--
1.7.0.4
next prev parent reply other threads:[~2011-08-04 23:00 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-04 23:00 [RFC PATCH 0/3] If an IRQ is a GPIO, request and configure it Stephen Warren
2011-08-04 23:00 ` Stephen Warren [this message]
2011-08-05 0:01 ` [PATCH 1/3] irq: " Mark Brown
2011-08-05 3:53 ` Stephen Warren
2011-08-05 5:35 ` Mark Brown
2011-08-05 8:06 ` Ben Dooks
2011-08-05 8:29 ` Mark Brown
2011-08-05 15:29 ` Stephen Warren
2011-08-05 16:15 ` Mark Brown
2011-08-05 1:54 ` Rob Herring
2011-08-05 4:05 ` Stephen Warren
2011-08-05 7:58 ` Ben Dooks
2011-09-02 8:36 ` Thomas Gleixner
2011-09-02 15:24 ` Stephen Warren
2011-09-02 15:34 ` Stephen Warren
2011-09-02 15:50 ` Thomas Gleixner
2011-08-04 23:00 ` [PATCH 2/3] mmc: tegra: Don't gpio_request GPIOs used as IRQs Stephen Warren
2011-08-04 23:00 ` [PATCH 3/3] ASoC: jack_add_gpios: " Stephen Warren
2011-08-05 7:55 ` [RFC PATCH 0/3] If an IRQ is a GPIO, request and configure it Ben Dooks
2011-08-05 9:40 ` Russell King - ARM Linux
2011-08-05 10:30 ` Ben Dooks
2011-08-05 20:25 ` Linus Walleij
2011-08-05 15:43 ` Stephen Warren
2011-08-05 19:15 ` Russell King - ARM Linux
2011-08-05 19:33 ` Stephen Warren
2011-08-05 21:40 ` Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1312498820-2275-2-git-send-email-swarren@nvidia.com \
--to=swarren@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).