[PATCH] dmaengine: at_hdmac: fix way to specify cyclic capability

[PATCH] dmaengine: at_hdmac: fix way to specify cyclic capability

[Nicolas Ferre]

In this driver, we can trigger cyclic transfer on peripherals-DMA interfaces.
It is dependent on driver implementation but cannot depend on a platform
property: we remove the dma_has_cap(DMA_CYCLIC, ) test which has no meaning.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 drivers/dma/at_hdmac.c |   10 ++++------
 1 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 6a483ea..e2a5f3e 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -1293,15 +1293,13 @@ static int __init at_dma_probe(struct platform_device *pdev)
 	if (dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask))
 		atdma->dma_common.device_prep_dma_memcpy = atc_prep_dma_memcpy;
 
-	if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask))
+	if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)) {
 		atdma->dma_common.device_prep_slave_sg = atc_prep_slave_sg;
-
-	if (dma_has_cap(DMA_CYCLIC, atdma->dma_common.cap_mask))
+		/* controller can do slave DMA: can trigger cyclic transfers */
+		dma_cap_set(DMA_CYCLIC, atdma->dma_common.cap_mask);
 		atdma->dma_common.device_prep_dma_cyclic = atc_prep_dma_cyclic;
-
-	if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask) ||
-	    dma_has_cap(DMA_CYCLIC, atdma->dma_common.cap_mask))
 		atdma->dma_common.device_control = atc_control;
+	}
 
 	dma_writel(atdma, EN, AT_DMA_ENABLE);
 
-- 
1.7.4.1