linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: will.deacon@arm.com (Will Deacon)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 3/8] ARM: gic: convert logical CPU numbers into physical numbers
Date: Tue,  9 Aug 2011 22:42:37 +0100	[thread overview]
Message-ID: <1312926162-22469-4-git-send-email-will.deacon@arm.com> (raw)
In-Reply-To: <1312926162-22469-1-git-send-email-will.deacon@arm.com>

The GIC driver must convert logical CPU numbers passed in from Linux
into physical CPU numbers that are understood by the hardware.

This patch uses the new cpu_logical_map macro for performing the
conversion inside the GIC driver.

Signed-off-by: Will Deacon <will.deacon@arm.com>
---
 arch/arm/common/gic.c |   12 +++++++++---
 1 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 3227ca9..6822c10 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -180,7 +180,7 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
 		return -EINVAL;
 
 	mask = 0xff << shift;
-	bit = 1 << (cpu + shift);
+	bit = 1 << (cpu_logical_map(cpu) + shift);
 
 	spin_lock(&irq_controller_lock);
 	val = readl_relaxed(reg) & ~mask;
@@ -260,7 +260,8 @@ static void __init gic_dist_init(struct gic_chip_data *gic,
 {
 	unsigned int gic_irqs, irq_limit, i;
 	void __iomem *base = gic->dist_base;
-	u32 cpumask = 1 << smp_processor_id();
+	u32 cpu = cpu_logical_map(smp_processor_id());
+	u32 cpumask = 1 << cpu;
 
 	cpumask |= cpumask << 8;
 	cpumask |= cpumask << 16;
@@ -382,7 +383,12 @@ void __cpuinit gic_enable_ppi(unsigned int irq)
 #ifdef CONFIG_SMP
 void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 {
-	unsigned long map = *cpus_addr(*mask);
+	int cpu;
+	unsigned long map = 0;
+
+	/* Convert our logical CPU mask into a physical one. */
+	for_each_cpu(cpu, mask)
+		map |= 1 << cpu_logical_map(cpu);
 
 	/*
 	 * Ensure that stores to Normal memory are visible to the
-- 
1.7.0.4

  parent reply	other threads:[~2011-08-09 21:42 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-09 21:42 [RFC PATCH 0/8] Introduce logical CPU mapping Will Deacon
2011-08-09 21:42 ` [RFC PATCH 1/8] ARM: cpuid: add support for reading MPIDR Will Deacon
2011-08-09 21:42 ` [RFC PATCH 2/8] ARM: smp: populate logical CPU mapping during boot Will Deacon
2011-08-09 21:42 ` Will Deacon [this message]
2011-08-11 15:04   ` [RFC PATCH 3/8] ARM: gic: convert logical CPU numbers into physical numbers Will Deacon
2011-08-09 21:42 ` [RFC PATCH 4/8] ARM: exynos4: convert logical CPU numbers to " Will Deacon
2011-08-10  1:07   ` Kyungmin Park
2011-08-10  8:46     ` Will Deacon
2011-08-10  8:49       ` Kyungmin Park
2011-08-10  8:57         ` Will Deacon
2011-08-09 21:42 ` [RFC PATCH 5/8] ARM: msm: " Will Deacon
2011-08-09 22:26   ` David Brown
2011-08-10  8:42     ` Will Deacon
2011-08-10 15:51       ` David Brown
2011-08-09 21:42 ` [RFC PATCH 6/8] ARM: shmobile: " Will Deacon
2011-08-09 21:42 ` [RFC PATCH 7/8] ARM: ux500: " Will Deacon
2011-08-11 13:31   ` Linus Walleij
2011-08-09 21:42 ` [RFC PATCH 8/8] ARM: versatile: " Will Deacon
2011-08-10  8:50 ` [RFC PATCH 0/8] Introduce logical CPU mapping Santosh
2011-08-10  8:58   ` Will Deacon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1312926162-22469-4-git-send-email-will.deacon@arm.com \
    --to=will.deacon@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).