From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/8] ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage
Date: Sun, 14 Aug 2011 00:14:00 +0800 [thread overview]
Message-ID: <1313252047-8820-2-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1313252047-8820-1-git-send-email-shawn.guo@linaro.org>
From: Ben Dooks <ben-linux@fluff.org>
irq_to_gpio() is being called on a GPIO so change to using
gpio_to_irq() instead.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-mx5/board-cpuimx51.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 7c893fa..68934ea 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
- .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO),
+ .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
--
1.7.4.1
next prev parent reply other threads:[~2011-08-13 16:14 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-13 16:13 [PATCH v2 0/8] Clean up MXC and MXS mach/gpio.h Shawn Guo
2011-08-13 16:14 ` Shawn Guo [this message]
2011-08-13 16:14 ` [PATCH v2 2/8] arm/mxc: do not use gpio_to_irq() for static initializers Shawn Guo
2011-08-13 16:14 ` [PATCH v2 3/8] gpio/mxc: add .to_irq for gpio chip Shawn Guo
2011-08-13 16:14 ` [PATCH v2 4/8] arm/mxc: remove gpio_to_irq() from mach/gpio.h Shawn Guo
2011-08-13 16:14 ` [PATCH v2 5/8] gpio/mxc: move irq_to_gpio() into gpio-mxc driver Shawn Guo
2011-08-13 16:14 ` [PATCH v2 6/8] arm/mxc: move IMX_GPIO_NR into mach/hardware.h Shawn Guo
2011-08-13 16:14 ` [PATCH v2 7/8] gpio/mxs: move irq_to_gpio() into gpio-mxs driver Shawn Guo
2011-08-13 16:14 ` [PATCH v2 8/8] arm/mxs: move MXS_GPIO_NR into mach/mxs.h Shawn Guo
2011-08-16 7:19 ` [PATCH v2 0/8] Clean up MXC and MXS mach/gpio.h Sascha Hauer
2011-08-17 6:25 ` Shawn Guo
2011-08-17 6:47 ` Sascha Hauer
2011-08-17 7:10 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1313252047-8820-2-git-send-email-shawn.guo@linaro.org \
--to=shawn.guo@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).