From: robherring2@gmail.com (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/6] Initial Calxeda Highbank support
Date: Tue, 16 Aug 2011 15:34:52 -0500 [thread overview]
Message-ID: <1313526898-19920-1-git-send-email-robherring2@gmail.com> (raw)
From: Rob Herring <rob.herring@calxeda.com>
This adds initial platform support for Calxeda's Highbank ARM SOC.
If any of the mach header clean-up series go in, then I can drop some
headers. Several are already empty. This will need some rework if/when
Marc Z's localtimers rework patches are merged:
http://article.gmane.org/gmane.linux.ports.arm.kernel/127831/
Based on 3.1-rc2 plus previously posted L2x0 and GIC devicetree
binding support. The L2x0 support is merged in rmk's for-next branch.
The GIC bindings are still being discussed.
Rob
Martin Bogomolni (1):
ARM: highbank: Add cpu hotplug support
Rob Herring (5):
ARM: highbank: add devicetree source
ARM: add Highbank core platform support
MAINTAINERS: add Calxeda Highbank ARM platform
ARM: highbank: add SMP support
ARM: highbank: add suspend support
Documentation/devicetree/bindings/arm/calxeda.txt | 8 +
MAINTAINERS | 6 +
arch/arm/Kconfig | 19 ++-
arch/arm/Makefile | 1 +
arch/arm/boot/dts/highbank.dts | 212 +++++++++++++++++++++
arch/arm/mach-highbank/Makefile | 5 +
arch/arm/mach-highbank/Makefile.boot | 1 +
arch/arm/mach-highbank/clock.c | 63 ++++++
arch/arm/mach-highbank/core.h | 3 +
arch/arm/mach-highbank/highbank.c | 164 ++++++++++++++++
arch/arm/mach-highbank/hotplug.c | 56 ++++++
arch/arm/mach-highbank/include/mach/debug-macro.S | 20 ++
arch/arm/mach-highbank/include/mach/entry-macro.S | 9 +
arch/arm/mach-highbank/include/mach/gpio.h | 1 +
arch/arm/mach-highbank/include/mach/io.h | 8 +
arch/arm/mach-highbank/include/mach/irqs.h | 6 +
arch/arm/mach-highbank/include/mach/memory.h | 1 +
arch/arm/mach-highbank/include/mach/system.h | 26 +++
arch/arm/mach-highbank/include/mach/timex.h | 6 +
arch/arm/mach-highbank/include/mach/uncompress.h | 9 +
arch/arm/mach-highbank/include/mach/vmalloc.h | 6 +
arch/arm/mach-highbank/localtimer.c | 37 ++++
arch/arm/mach-highbank/platsmp.c | 79 ++++++++
arch/arm/mach-highbank/pm.c | 55 ++++++
arch/arm/mach-highbank/sysregs.h | 30 +++
arch/arm/mach-highbank/system.c | 33 ++++
arch/arm/mm/Kconfig | 2 +-
27 files changed, 864 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/calxeda.txt
create mode 100644 arch/arm/boot/dts/highbank.dts
create mode 100644 arch/arm/mach-highbank/Makefile
create mode 100644 arch/arm/mach-highbank/Makefile.boot
create mode 100644 arch/arm/mach-highbank/clock.c
create mode 100644 arch/arm/mach-highbank/core.h
create mode 100644 arch/arm/mach-highbank/highbank.c
create mode 100644 arch/arm/mach-highbank/hotplug.c
create mode 100644 arch/arm/mach-highbank/include/mach/debug-macro.S
create mode 100644 arch/arm/mach-highbank/include/mach/entry-macro.S
create mode 100644 arch/arm/mach-highbank/include/mach/gpio.h
create mode 100644 arch/arm/mach-highbank/include/mach/io.h
create mode 100644 arch/arm/mach-highbank/include/mach/irqs.h
create mode 100644 arch/arm/mach-highbank/include/mach/memory.h
create mode 100644 arch/arm/mach-highbank/include/mach/system.h
create mode 100644 arch/arm/mach-highbank/include/mach/timex.h
create mode 100644 arch/arm/mach-highbank/include/mach/uncompress.h
create mode 100644 arch/arm/mach-highbank/include/mach/vmalloc.h
create mode 100644 arch/arm/mach-highbank/localtimer.c
create mode 100644 arch/arm/mach-highbank/platsmp.c
create mode 100644 arch/arm/mach-highbank/pm.c
create mode 100644 arch/arm/mach-highbank/sysregs.h
create mode 100644 arch/arm/mach-highbank/system.c
--
1.7.4.1
next reply other threads:[~2011-08-16 20:34 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-16 20:34 Rob Herring [this message]
2011-08-16 20:34 ` [PATCH 1/6] ARM: highbank: add devicetree source Rob Herring
2011-08-17 7:27 ` Shawn Guo
2011-08-17 13:49 ` Rob Herring
2011-08-17 14:51 ` Shawn Guo
2011-08-20 18:32 ` Rob Herring
2011-08-17 17:52 ` Will Deacon
2011-08-20 18:29 ` Rob Herring
2011-08-17 9:27 ` Mark Rutland
[not found] ` <4e4b8979.533fd80a.2ff3.1626SMTPIN_ADDED@mx.google.com>
2011-08-17 14:08 ` Rob Herring
2011-08-17 14:34 ` Will Deacon
2011-08-20 9:51 ` Shawn Guo
2011-08-20 18:19 ` Rob Herring
2011-08-16 20:34 ` [PATCH 2/6] ARM: add Highbank core platform support Rob Herring
2011-08-16 22:19 ` Jamie Iles
2011-08-25 2:19 ` Rob Herring
2011-08-17 7:43 ` Russell King - ARM Linux
2011-08-18 15:34 ` Arnd Bergmann
2011-08-18 15:40 ` Russell King - ARM Linux
2011-08-19 14:11 ` Arnd Bergmann
2011-08-20 19:24 ` Rob Herring
2011-08-20 23:05 ` Russell King - ARM Linux
2011-08-20 18:44 ` Rob Herring
2011-08-25 2:45 ` Rob Herring
2011-08-25 4:03 ` Shawn Guo
2011-08-25 15:59 ` Arnd Bergmann
2011-08-25 16:02 ` Arnd Bergmann
2011-08-25 18:03 ` Rob Herring
2011-08-25 21:44 ` Arnd Bergmann
2011-08-19 6:43 ` Shawn Guo
2011-08-19 7:17 ` Shawn Guo
2011-08-20 18:16 ` Rob Herring
2011-08-19 8:56 ` Dave Martin
2011-08-19 13:45 ` Arnd Bergmann
2011-08-20 14:48 ` Shawn Guo
2011-08-20 18:21 ` Rob Herring
2011-08-20 15:54 ` Shawn Guo
2011-08-20 16:10 ` Shawn Guo
2011-08-20 18:22 ` Rob Herring
2011-08-22 5:55 ` Shawn Guo
2011-08-22 10:01 ` Jamie Iles
2011-08-23 3:33 ` Shawn Guo
2011-08-22 8:35 ` Shawn Guo
2011-08-22 9:15 ` Shawn Guo
2011-08-22 13:23 ` Rob Herring
2011-08-16 20:34 ` [PATCH 3/6] MAINTAINERS: add Calxeda Highbank ARM platform Rob Herring
2011-08-16 20:34 ` [PATCH 4/6] ARM: highbank: add SMP support Rob Herring
2011-08-17 7:37 ` Russell King - ARM Linux
2011-08-17 14:01 ` Rob Herring
2011-08-17 18:52 ` Russell King - ARM Linux
2011-08-16 20:34 ` [PATCH 5/6] ARM: highbank: Add cpu hotplug support Rob Herring
2011-08-16 20:34 ` [PATCH 6/6] ARM: highbank: add suspend support Rob Herring
2011-08-25 1:17 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1313526898-19920-1-git-send-email-robherring2@gmail.com \
--to=robherring2@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).