From: ohad@wizery.com (Ohad Ben-Cohen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/7] omap: iommu migration, relocation and cleanups
Date: Wed, 24 Aug 2011 20:08:07 +0300 [thread overview]
Message-ID: <1314205694-28935-1-git-send-email-ohad@wizery.com> (raw)
1. Migrate OMAP's iommu driver to the generic IOMMU API, and move it
to the dedicated iommu folder.
2. Fix omap3isp appropriately so it doesn't break.
3. Adapt OMAP's iovmm appropriately as well, because omap3isp still relies
on it. The plan is eventually to remove iovmm and replace it with the
upcoming IOMMU-based generic DMA-API. Move iovmm to the iommu folder too;
it belongs there more than it belongs in the OMAP folders.
4. Start cleaning up OMAP's iommu components towards the end goal, where
1) omap-iommu no longer exports public API (and instead provides its
entire functionality via the generic IOMMU API).
2) omap-iovmm is removed.
Tested on OMAP3 (with omap3isp) and OMAP4 (with rpmsg/remoteproc).
v1->v2:
1. Added Laurent's and Hiroshi's Acked-by
2. iommu: use spinlock instead of mutex so attach/deattach can stay atomic (Joerg)
3. iovmm: remove obsolete comment (Hiroshi)
4. iommu: don't rename load_iotlb_entry directly (Hiroshi)
5. Rebase to 3.1-rc3
rfc->v1:
1. Migrate iommu, iovmm and omap3isp in a single patch for bisectibility sake.
2. Apply Laurent Pinchart's comments (thanks Laurent!)
3. Rebase to 3.1-rc2
Ohad Ben-Cohen (7):
omap: iommu: migrate to the generic IOMMU API
omap: iommu/iovmm: move to dedicated iommu folder
omap: iommu: stop exporting local functions
omap: iommu: PREFETCH_IOTLB cleanup
omap: iovmm: remove unused functionality
omap: iommu: remove unused exported API
omap: iommu: omapify 'struct iommu' and exposed API
arch/arm/mach-omap2/iommu2.c | 31 +-
arch/arm/plat-omap/Kconfig | 12 -
arch/arm/plat-omap/Makefile | 2 -
arch/arm/plat-omap/include/plat/iommu.h | 77 ++--
arch/arm/plat-omap/include/plat/iommu2.h | 4 +-
arch/arm/plat-omap/{ => include/plat}/iopgtable.h | 20 +-
arch/arm/plat-omap/include/plat/iovmm.h | 30 +-
drivers/iommu/Kconfig | 18 +
drivers/iommu/Makefile | 3 +
.../iommu/omap-iommu-debug.c | 36 +-
.../iommu.c => drivers/iommu/omap-iommu.c | 511 +++++++++++++-------
.../iovmm.c => drivers/iommu/omap-iovmm.c | 338 +++----------
drivers/media/video/Kconfig | 2 +-
drivers/media/video/omap3isp/isp.c | 45 ++-
drivers/media/video/omap3isp/isp.h | 5 +-
drivers/media/video/omap3isp/ispccdc.c | 25 +-
drivers/media/video/omap3isp/ispstat.c | 11 +-
drivers/media/video/omap3isp/ispvideo.c | 4 +-
18 files changed, 612 insertions(+), 562 deletions(-)
rename arch/arm/plat-omap/{ => include/plat}/iopgtable.h (82%)
rename arch/arm/plat-omap/iommu-debug.c => drivers/iommu/omap-iommu-debug.c (91%)
rename arch/arm/plat-omap/iommu.c => drivers/iommu/omap-iommu.c (61%)
rename arch/arm/plat-omap/iovmm.c => drivers/iommu/omap-iovmm.c (63%)
--
1.7.4.1
next reply other threads:[~2011-08-24 17:08 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-24 17:08 Ohad Ben-Cohen [this message]
2011-08-24 17:08 ` [PATCH v2 1/7] omap: iommu: migrate to the generic IOMMU API Ohad Ben-Cohen
2011-08-24 17:08 ` [PATCH v2 2/7] omap: iommu/iovmm: move to dedicated iommu folder Ohad Ben-Cohen
2011-08-24 17:08 ` [PATCH v2 3/7] omap: iommu: stop exporting local functions Ohad Ben-Cohen
2011-08-24 17:08 ` [PATCH v2 4/7] omap: iommu: PREFETCH_IOTLB cleanup Ohad Ben-Cohen
2011-08-24 17:08 ` [PATCH v2 5/7] omap: iovmm: remove unused functionality Ohad Ben-Cohen
2011-08-24 17:08 ` [PATCH v2 6/7] omap: iommu: remove unused exported API Ohad Ben-Cohen
2011-08-24 17:08 ` [PATCH v2 7/7] omap: iommu: omapify 'struct iommu' and exposed API Ohad Ben-Cohen
2011-08-25 16:03 ` [PATCH v2 0/7] omap: iommu migration, relocation and cleanups Tony Lindgren
2011-08-26 11:25 ` Roedel, Joerg
2011-08-26 12:21 ` Ohad Ben-Cohen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314205694-28935-1-git-send-email-ohad@wizery.com \
--to=ohad@wizery.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).