linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: ohad@wizery.com (Ohad Ben-Cohen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/7] omap: iommu/iovmm: move to dedicated iommu folder
Date: Wed, 24 Aug 2011 20:08:09 +0300	[thread overview]
Message-ID: <1314205694-28935-3-git-send-email-ohad@wizery.com> (raw)
In-Reply-To: <1314205694-28935-1-git-send-email-ohad@wizery.com>

Move OMAP's iommu drivers to the dedicated iommu drivers folder.

While OMAP's iovmm (virtual memory manager) driver does not strictly
belong to the iommu drivers folder, move it there as well, because
it's by no means OMAP-specific (in concept. technically it is still
coupled with OMAP's iommu).

Eventually, iovmm will be completely replaced with the generic,
iommu-based, dma-mapping API.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
---
 arch/arm/plat-omap/Kconfig                         |   14 --------------
 arch/arm/plat-omap/Makefile                        |    2 --
 arch/arm/plat-omap/{ => include/plat}/iopgtable.h  |    0
 drivers/iommu/Kconfig                              |   18 ++++++++++++++++++
 drivers/iommu/Makefile                             |    3 +++
 .../iommu/omap-iommu-debug.c                       |    2 +-
 .../iommu.c => drivers/iommu/omap-iommu.c          |    2 +-
 .../iovmm.c => drivers/iommu/omap-iovmm.c          |    2 +-
 drivers/media/video/Kconfig                        |    2 +-
 9 files changed, 25 insertions(+), 20 deletions(-)
 rename arch/arm/plat-omap/{ => include/plat}/iopgtable.h (100%)
 rename arch/arm/plat-omap/iommu-debug.c => drivers/iommu/omap-iommu-debug.c (99%)
 rename arch/arm/plat-omap/iommu.c => drivers/iommu/omap-iommu.c (99%)
 rename arch/arm/plat-omap/iovmm.c => drivers/iommu/omap-iovmm.c (99%)

diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index e1e954d..fa62037 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -132,20 +132,6 @@ config OMAP_MBOX_KFIFO_SIZE
 	  This can also be changed at runtime (via the mbox_kfifo_size
 	  module parameter).
 
-#can't be tristate; iommu api doesn't support un-registration
-config OMAP_IOMMU
-	bool
-	select IOMMU_API
-
-config OMAP_IOMMU_DEBUG
-       tristate "Export OMAP IOMMU internals in DebugFS"
-       depends on OMAP_IOMMU && DEBUG_FS
-       help
-         Select this to see extensive information about
-         the internal state of OMAP IOMMU in debugfs.
-
-         Say N unless you know you need this.
-
 config OMAP_IOMMU_IVA2
 	bool
 
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index f0233e6..9852622 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -18,8 +18,6 @@ obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
 obj-$(CONFIG_ARCH_OMAP4) += omap_device.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
-obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
-obj-$(CONFIG_OMAP_IOMMU_DEBUG) += iommu-debug.o
 
 obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
diff --git a/arch/arm/plat-omap/iopgtable.h b/arch/arm/plat-omap/include/plat/iopgtable.h
similarity index 100%
rename from arch/arm/plat-omap/iopgtable.h
rename to arch/arm/plat-omap/include/plat/iopgtable.h
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index b57b3fa..432463b 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -107,4 +107,22 @@ config INTR_REMAP
 	  To use x2apic mode in the CPU's which support x2APIC enhancements or
 	  to support platforms with CPU's having > 8 bit APIC ID, say Y.
 
+# OMAP IOMMU support
+config OMAP_IOMMU
+	bool "OMAP IOMMU Support"
+	select IOMMU_API
+
+config OMAP_IOVMM
+	tristate
+	select OMAP_IOMMU
+
+config OMAP_IOMMU_DEBUG
+       tristate "Export OMAP IOMMU/IOVMM internals in DebugFS"
+       depends on OMAP_IOVMM && DEBUG_FS
+       help
+         Select this to see extensive information about
+         the internal state of OMAP IOMMU/IOVMM in debugfs.
+
+         Say N unless you know you need this.
+
 endif # IOMMU_SUPPORT
diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile
index 4d4d77d..f798cdd 100644
--- a/drivers/iommu/Makefile
+++ b/drivers/iommu/Makefile
@@ -3,3 +3,6 @@ obj-$(CONFIG_MSM_IOMMU) += msm_iommu.o msm_iommu_dev.o
 obj-$(CONFIG_AMD_IOMMU) += amd_iommu.o amd_iommu_init.o
 obj-$(CONFIG_DMAR) += dmar.o iova.o intel-iommu.o
 obj-$(CONFIG_INTR_REMAP) += dmar.o intr_remapping.o
+obj-$(CONFIG_OMAP_IOMMU) += omap-iommu.o
+obj-$(CONFIG_OMAP_IOVMM) += omap-iovmm.o
+obj-$(CONFIG_OMAP_IOMMU_DEBUG) += omap-iommu-debug.o
diff --git a/arch/arm/plat-omap/iommu-debug.c b/drivers/iommu/omap-iommu-debug.c
similarity index 99%
rename from arch/arm/plat-omap/iommu-debug.c
rename to drivers/iommu/omap-iommu-debug.c
index f07cf2f..0f8c8dd 100644
--- a/arch/arm/plat-omap/iommu-debug.c
+++ b/drivers/iommu/omap-iommu-debug.c
@@ -21,7 +21,7 @@
 #include <plat/iommu.h>
 #include <plat/iovmm.h>
 
-#include "iopgtable.h"
+#include <plat/iopgtable.h>
 
 #define MAXCOLUMN 100 /* for short messages */
 
diff --git a/arch/arm/plat-omap/iommu.c b/drivers/iommu/omap-iommu.c
similarity index 99%
rename from arch/arm/plat-omap/iommu.c
rename to drivers/iommu/omap-iommu.c
index 51aa008..bf8de64 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/drivers/iommu/omap-iommu.c
@@ -26,7 +26,7 @@
 
 #include <plat/iommu.h>
 
-#include "iopgtable.h"
+#include <plat/iopgtable.h>
 
 #define for_each_iotlb_cr(obj, n, __i, cr)				\
 	for (__i = 0;							\
diff --git a/arch/arm/plat-omap/iovmm.c b/drivers/iommu/omap-iovmm.c
similarity index 99%
rename from arch/arm/plat-omap/iovmm.c
rename to drivers/iommu/omap-iovmm.c
index aa2c478..809ca12 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/drivers/iommu/omap-iovmm.c
@@ -23,7 +23,7 @@
 #include <plat/iommu.h>
 #include <plat/iovmm.h>
 
-#include "iopgtable.h"
+#include <plat/iopgtable.h>
 
 /*
  * A device driver needs to create address mappings between:
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index f574dc0..6a25fad 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -763,7 +763,7 @@ source "drivers/media/video/m5mols/Kconfig"
 
 config VIDEO_OMAP3
 	tristate "OMAP 3 Camera support (EXPERIMENTAL)"
-	select OMAP_IOMMU
+	select OMAP_IOVMM
 	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 && EXPERIMENTAL
 	---help---
 	  Driver for an OMAP 3 camera controller.
-- 
1.7.4.1

  parent reply	other threads:[~2011-08-24 17:08 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-08-24 17:08 [PATCH v2 0/7] omap: iommu migration, relocation and cleanups Ohad Ben-Cohen
2011-08-24 17:08 ` [PATCH v2 1/7] omap: iommu: migrate to the generic IOMMU API Ohad Ben-Cohen
2011-08-24 17:08 ` Ohad Ben-Cohen [this message]
2011-08-24 17:08 ` [PATCH v2 3/7] omap: iommu: stop exporting local functions Ohad Ben-Cohen
2011-08-24 17:08 ` [PATCH v2 4/7] omap: iommu: PREFETCH_IOTLB cleanup Ohad Ben-Cohen
2011-08-24 17:08 ` [PATCH v2 5/7] omap: iovmm: remove unused functionality Ohad Ben-Cohen
2011-08-24 17:08 ` [PATCH v2 6/7] omap: iommu: remove unused exported API Ohad Ben-Cohen
2011-08-24 17:08 ` [PATCH v2 7/7] omap: iommu: omapify 'struct iommu' and exposed API Ohad Ben-Cohen
2011-08-25 16:03 ` [PATCH v2 0/7] omap: iommu migration, relocation and cleanups Tony Lindgren
2011-08-26 11:25 ` Roedel, Joerg
2011-08-26 12:21   ` Ohad Ben-Cohen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1314205694-28935-3-git-send-email-ohad@wizery.com \
    --to=ohad@wizery.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).