From: swarren@nvidia.com (Stephen Warren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 00/13] arm/tegra: Initialize GPIO & pinmux from DT
Date: Thu, 25 Aug 2011 17:43:31 -0600 [thread overview]
Message-ID: <1314315824-9687-1-git-send-email-swarren@nvidia.com> (raw)
v3:
* Build on Jamie Iles' patches to split some of the DT parsing into
common code.
* Renamed some properties to remove "nvidia," from name; they can be
generic.
* Support pins property, to apply DT nodes to multiple pins/groups
* Some minor error-message changes driven by some of the above.
* Removed requirement to #ifdef CONFIG_OF
* Removed AUXDATA table entries in mach-tegra/board-dt.c
TODO:
* Convert from using strings to using integers for the function and pin
names. This relies on the dtc patches I posted yesterday, but should
be pretty simple once they're in.
Jamie Iles (1):
of: add a generic pinmux helper
Stephen Warren (12):
arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
docs/dt: Document nvidia,tegra20-gpio's nvidia,enabled-gpios property
arm/dt: Tegra: Add nvidia,enabled-gpios property to GPIO controller
docs/dt: Document nvidia,tegra20-pinmux binding
arm/dt: Tegra: Add pinmux node
dt: add empty for_each_child_of_node, of_find_property
gpio/tegra: Convert to a platform device
gpio/tegra: Add device tree support
arm/tegra: Convert pinmux driver to a platform device
of: add property iteration helpers
arm/tegra: Add device tree support to pinmux driver
arm/tegra: board-dt: Remove dependency on non-dt pinmux functions
.../devicetree/bindings/gpio/gpio_nvidia.txt | 20 ++
.../devicetree/bindings/pinmux/pinmux_nvidia.txt | 302 ++++++++++++++++++++
arch/arm/boot/dts/tegra-harmony.dts | 258 +++++++++++++++++
arch/arm/boot/dts/tegra-seaboard.dts | 247 ++++++++++++++++
arch/arm/boot/dts/tegra20.dtsi | 5 +
arch/arm/mach-tegra/Makefile | 1 -
arch/arm/mach-tegra/board-dt.c | 10 -
arch/arm/mach-tegra/board-harmony-pinmux.c | 8 +
arch/arm/mach-tegra/board-paz00-pinmux.c | 8 +
arch/arm/mach-tegra/board-seaboard-pinmux.c | 9 +-
arch/arm/mach-tegra/board-trimslice-pinmux.c | 7 +
arch/arm/mach-tegra/devices.c | 10 +
arch/arm/mach-tegra/devices.h | 2 +
arch/arm/mach-tegra/pinmux.c | 280 ++++++++++++++++++
drivers/gpio/gpio-tegra.c | 48 +++-
drivers/of/Kconfig | 5 +
drivers/of/Makefile | 1 +
drivers/of/of_pinmux.c | 109 +++++++
include/linux/of.h | 10 +
include/linux/of_iter_prop.h | 135 +++++++++
include/linux/of_pinmux.h | 74 +++++
21 files changed, 1524 insertions(+), 25 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinmux/pinmux_nvidia.txt
create mode 100644 drivers/of/of_pinmux.c
create mode 100644 include/linux/of_iter_prop.h
create mode 100644 include/linux/of_pinmux.h
next reply other threads:[~2011-08-25 23:43 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-25 23:43 Stephen Warren [this message]
2011-08-25 23:43 ` [PATCH v3 01/13] arm/tegra: Prep boards for gpio/pinmux conversion to pdevs Stephen Warren
2011-08-25 23:43 ` [PATCH v3 02/13] docs/dt: Document nvidia, tegra20-gpio's nvidia, enabled-gpios property Stephen Warren
2011-08-25 23:43 ` [PATCH v3 03/13] arm/dt: Tegra: Add nvidia, enabled-gpios property to GPIO controller Stephen Warren
2011-08-25 23:43 ` [PATCH v3 04/13] docs/dt: Document nvidia,tegra20-pinmux binding Stephen Warren
2011-08-25 23:43 ` [PATCH v3 05/13] arm/dt: Tegra: Add pinmux node Stephen Warren
2011-08-25 23:43 ` [PATCH v3 06/13] dt: add empty for_each_child_of_node, of_find_property Stephen Warren
2011-08-31 18:25 ` Stephen Warren
2011-08-25 23:43 ` [PATCH v3 07/13] gpio/tegra: Convert to a platform device Stephen Warren
2011-08-25 23:43 ` [PATCH v3 08/13] gpio/tegra: Add device tree support Stephen Warren
2011-08-25 23:43 ` [PATCH v3 09/13] arm/tegra: Convert pinmux driver to a platform device Stephen Warren
2011-08-25 23:43 ` [PATCH v3 10/13] of: add a generic pinmux helper Stephen Warren
2011-08-26 9:16 ` Jamie Iles
2011-08-29 11:09 ` Linus Walleij
2011-08-29 21:46 ` Stephen Warren
2011-09-01 11:30 ` Linus Walleij
2011-08-25 23:43 ` [PATCH v3 11/13] of: add property iteration helpers Stephen Warren
2011-08-26 9:26 ` Jamie Iles
2011-08-26 15:59 ` Stephen Warren
2011-08-26 16:16 ` Jamie Iles
2011-08-25 23:43 ` [PATCH v3 12/13] arm/tegra: Add device tree support to pinmux driver Stephen Warren
2011-08-25 23:43 ` [PATCH v3 13/13] arm/tegra: board-dt: Remove dependency on non-dt pinmux functions Stephen Warren
2011-08-26 5:04 ` [PATCH v3 00/13] arm/tegra: Initialize GPIO & pinmux from DT Olof Johansson
2011-08-26 16:07 ` Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314315824-9687-1-git-send-email-swarren@nvidia.com \
--to=swarren@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).