From: jason.chen@freescale.com (jason.chen at freescale.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM imx53: add pwm devices support
Date: Tue, 30 Aug 2011 15:52:35 +0800 [thread overview]
Message-ID: <1314690756-19982-1-git-send-email-jason.chen@freescale.com> (raw)
From: Jason Chen <b02280@freescale.com>
Signed-off-by: Jason Chen <b02280@freescale.com>
Signed-off-by: Jason Chen <jason.chen@linaro.org>
---
arch/arm/mach-mx5/clock-mx51-mx53.c | 2 ++
arch/arm/mach-mx5/devices-imx53.h | 4 ++++
arch/arm/plat-mxc/devices/platform-mxc_pwm.c | 9 +++++++++
arch/arm/plat-mxc/pwm.c | 3 ++-
4 files changed, 17 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index f7bf996..f5f116f 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1507,6 +1507,8 @@ static struct clk_lookup mx53_lookups[] = {
_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
_REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
_REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
+ _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk)
+ _REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk)
};
static void clk_tree_init(void)
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
index c27fe8b..258e68f 100644
--- a/arch/arm/mach-mx5/devices-imx53.h
+++ b/arch/arm/mach-mx5/devices-imx53.h
@@ -40,3 +40,7 @@ extern const struct imx_imx_ssi_data imx53_imx_ssi_data[];
extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
#define imx53_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx53_imx_keypad_data, pdata)
+
+extern const struct imx_mxc_pwm_data imx53_mxc_pwm_data[] __initconst;
+#define imx53_add_mxc_pwm(id) \
+ imx_add_mxc_pwm(&imx53_mxc_pwm_data[id])
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_pwm.c b/arch/arm/plat-mxc/devices/platform-mxc_pwm.c
index b0c4ae2..18cfd07 100644
--- a/arch/arm/plat-mxc/devices/platform-mxc_pwm.c
+++ b/arch/arm/plat-mxc/devices/platform-mxc_pwm.c
@@ -49,6 +49,15 @@ const struct imx_mxc_pwm_data imx51_mxc_pwm_data[] __initconst = {
};
#endif /* ifdef CONFIG_SOC_IMX51 */
+#ifdef CONFIG_SOC_IMX53
+const struct imx_mxc_pwm_data imx53_mxc_pwm_data[] __initconst = {
+#define imx53_mxc_pwm_data_entry(_id, _hwid) \
+ imx_mxc_pwm_data_entry(MX53, _id, _hwid, SZ_16K)
+ imx53_mxc_pwm_data_entry(0, 1),
+ imx53_mxc_pwm_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX53 */
+
struct platform_device *__init imx_add_mxc_pwm(
const struct imx_mxc_pwm_data *data)
{
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 761c3c9..5dda436 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -57,7 +57,8 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
return -EINVAL;
- if (cpu_is_mx27() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) {
+ if (cpu_is_mx27() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()
+ || cpu_is_mx53()) {
unsigned long long c;
unsigned long period_cycles, duty_cycles, prescale;
u32 cr;
--
1.7.4.1
next reply other threads:[~2011-08-30 7:52 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-30 7:52 jason.chen at freescale.com [this message]
2011-08-30 7:52 ` [PATCH 2/2] ARM: mx53/loco: add pwm backlight device jason.chen at freescale.com
2011-08-30 9:17 ` Eric Miao
2011-08-30 9:14 ` [PATCH 1/2] ARM imx53: add pwm devices support Eric Miao
-- strict thread matches above, loose matches on Subject: below --
2011-03-04 2:48 Jason Chen
2011-04-04 14:58 ` Uwe Kleine-König
2011-03-01 9:38 Jason Chen
2011-03-01 13:47 ` Fabio Estevam
2011-03-01 19:04 ` Uwe Kleine-König
2011-03-01 6:30 Jason Chen
2011-03-01 7:35 ` Eric Miao
2011-03-01 8:10 ` Uwe Kleine-König
2011-03-01 8:21 ` Eric Miao
2011-03-01 9:04 ` Uwe Kleine-König
2011-03-01 9:08 ` Jason Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314690756-19982-1-git-send-email-jason.chen@freescale.com \
--to=jason.chen@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).