From: richard.zhu@linaro.org (Richard Zhu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms
Date: Tue, 30 Aug 2011 17:56:06 +0800 [thread overview]
Message-ID: <1314698171-7937-1-git-send-email-richard.zhu@linaro.org> (raw)
Signed-off-by: Richard Zhu <richard.zhu@linaro.org>
---
arch/arm/mach-mx5/clock-mx51-mx53.c | 19 ++++
arch/arm/mach-mx5/devices-imx53.h | 4 +
arch/arm/plat-mxc/Makefile | 1 +
arch/arm/plat-mxc/ahci_sata.c | 104 +++++++++++++++++++++++
arch/arm/plat-mxc/devices/Kconfig | 4 +
arch/arm/plat-mxc/devices/Makefile | 1 +
arch/arm/plat-mxc/devices/platform-ahci-imx.c | 66 ++++++++++++++
arch/arm/plat-mxc/include/mach/ahci_sata.h | 33 +++++++
arch/arm/plat-mxc/include/mach/devices-common.h | 10 ++
9 files changed, 242 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/plat-mxc/ahci_sata.c
create mode 100644 arch/arm/plat-mxc/devices/platform-ahci-imx.c
create mode 100644 arch/arm/plat-mxc/include/mach/ahci_sata.h
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 7f20308..e1fadaf 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1397,6 +1397,22 @@ static struct clk esdhc4_mx53_clk = {
.secondary = &esdhc4_ipg_clk,
};
+static struct clk sata_clk = {
+ .parent = &ipg_clk,
+ .enable = _clk_max_enable,
+ .enable_reg = MXC_CCM_CCGR4,
+ .enable_shift = MXC_CCM_CCGRx_CG1_OFFSET,
+ .disable = _clk_max_disable,
+};
+
+static struct clk ahci_phy_clk = {
+ .parent = &usb_phy1_clk,
+};
+
+static struct clk ahci_dma_clk = {
+ .parent = &ahb_clk,
+};
+
DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
@@ -1503,6 +1519,9 @@ static struct clk_lookup mx53_lookups[] = {
_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
_REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
_REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
+ _REGISTER_CLOCK("imx53-ahci.0", "ahci", sata_clk)
+ _REGISTER_CLOCK("imx53-ahci.0", "ahci_phy", ahci_phy_clk)
+ _REGISTER_CLOCK("imx53-ahci.0", "ahci_dma", ahci_dma_clk)
};
static void clk_tree_init(void)
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
index c27fe8b..bcb3af1 100644
--- a/arch/arm/mach-mx5/devices-imx53.h
+++ b/arch/arm/mach-mx5/devices-imx53.h
@@ -40,3 +40,7 @@ extern const struct imx_imx_ssi_data imx53_imx_ssi_data[];
extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
#define imx53_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx53_imx_keypad_data, pdata)
+
+extern const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst;
+#define imx53_add_ahci_imx(id, pdata) \
+ imx_add_ahci_imx(&imx53_ahci_imx_data, pdata)
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index d53c35f..cc8e65a 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) += ahci_sata.o
ifdef CONFIG_SND_IMX_SOC
obj-y += ssi-fiq.o
obj-y += ssi-fiq-ksym.o
diff --git a/arch/arm/plat-mxc/ahci_sata.c b/arch/arm/plat-mxc/ahci_sata.c
new file mode 100644
index 0000000..4f54816
--- /dev/null
+++ b/arch/arm/plat-mxc/ahci_sata.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <mach/ahci_sata.h>
+
+static struct clk *sata_clk, *sata_ref_clk;
+
+/* AHCI module Initialization, if return 0, initialization is successful. */
+int sata_init(struct device *dev, void __iomem *addr)
+{
+ u32 tmpdata;
+ int ret = 0;
+ struct clk *clk;
+
+ sata_clk = clk_get(dev, "ahci");
+ if (IS_ERR(sata_clk)) {
+ dev_err(dev, "no sata clock.\n");
+ return PTR_ERR(sata_clk);
+ }
+ ret = clk_enable(sata_clk);
+ if (ret) {
+ dev_err(dev, "can't enable sata clock.\n");
+ goto put_sata_clk;
+ }
+
+ /* FSL IMX AHCI SATA uses the internal usb phy1 clk on loco */
+ sata_ref_clk = clk_get(dev, "ahci_phy");
+ if (IS_ERR(sata_ref_clk)) {
+ dev_err(dev, "no sata ref clock.\n");
+ ret = PTR_ERR(sata_ref_clk);
+ goto release_sata_clk;
+ }
+ ret = clk_enable(sata_ref_clk);
+ if (ret) {
+ dev_err(dev, "can't enable sata ref clock.\n");
+ goto put_sata_ref_clk;
+ }
+
+ /* Get the AHB clock rate, and configure the TIMER1MS reg later */
+ clk = clk_get(dev, "ahci_dma");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "no dma clock.\n");
+ ret = PTR_ERR(clk);
+ goto release_sata_ref_clk;
+ }
+ tmpdata = clk_get_rate(clk) / 1000;
+ clk_put(clk);
+
+ writel(tmpdata, addr + HOST_TIMER1MS);
+
+ tmpdata = readl(addr + HOST_CAP);
+ if (!(tmpdata & HOST_CAP_SSS)) {
+ tmpdata |= HOST_CAP_SSS;
+ writel(tmpdata, addr + HOST_CAP);
+ }
+
+ if (!(readl(addr + HOST_PORTS_IMPL) & 0x1))
+ writel((readl(addr + HOST_PORTS_IMPL) | 0x1),
+ addr + HOST_PORTS_IMPL);
+
+ return 0;
+
+release_sata_ref_clk:
+ clk_disable(sata_ref_clk);
+put_sata_ref_clk:
+ clk_put(sata_ref_clk);
+release_sata_clk:
+ clk_disable(sata_clk);
+put_sata_clk:
+ clk_put(sata_clk);
+
+ return ret;
+}
+
+void sata_exit(struct device *dev)
+{
+ clk_disable(sata_ref_clk);
+ clk_put(sata_ref_clk);
+
+ clk_disable(sata_clk);
+ clk_put(sata_clk);
+
+}
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index bd294ad..f63887b 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -76,3 +76,7 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
config IMX_HAVE_PLATFORM_SPI_IMX
bool
+
+config IMX_HAVE_PLATFORM_AHCI
+ bool
+ default y if ARCH_MX53
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
index b41bf97..e858ad9 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -25,3 +25,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) += platform-ahci-imx.o
diff --git a/arch/arm/plat-mxc/devices/platform-ahci-imx.c b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
new file mode 100644
index 0000000..9e1b460
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/dma-mapping.h>
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+#include <mach/ahci_sata.h>
+
+#define imx_ahci_imx_data_entry_single(soc, _devid) \
+ { \
+ .devid = _devid, \
+ .iobase = soc ## _SATA_BASE_ADDR, \
+ .irq = soc ## _INT_SATA, \
+ }
+
+#ifdef CONFIG_SOC_IMX53
+const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst =
+ imx_ahci_imx_data_entry_single(MX53, "imx53-ahci");
+#endif
+
+static struct ahci_platform_data default_sata_pdata = {
+ .init = sata_init,
+ .exit = sata_exit,
+};
+
+struct platform_device *__init imx_add_ahci_imx(
+ const struct imx_ahci_imx_data *data,
+ const struct ahci_platform_data *pdata)
+{
+ struct resource res[] = {
+ {
+ .start = data->iobase,
+ .end = data->iobase + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->irq,
+ .end = data->irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ if (pdata == NULL)
+ pdata = &default_sata_pdata;
+
+ return imx_add_platform_device_dmamask(data->devid, 0,
+ res, ARRAY_SIZE(res),
+ pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/plat-mxc/include/mach/ahci_sata.h b/arch/arm/plat-mxc/include/mach/ahci_sata.h
new file mode 100644
index 0000000..ba297e1
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/ahci_sata.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __PLAT_MXC_AHCI_SATA_H__
+#define __PLAT_MXC_AHCI_SATA_H__
+
+enum {
+ HOST_CAP = 0x00,
+ HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
+ HOST_PORTS_IMPL = 0x0c,
+ HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
+};
+
+extern int sata_init(struct device *dev, void __iomem *addr);
+extern void sata_exit(struct device *dev);
+#endif /* __PLAT_MXC_AHCI_SATA_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index 524538a..f04e063 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -301,3 +301,13 @@ struct platform_device *__init imx_add_spi_imx(
struct platform_device *imx_add_imx_dma(void);
struct platform_device *imx_add_imx_sdma(char *name,
resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
+
+#include <linux/ahci_platform.h>
+struct imx_ahci_imx_data {
+ const char *devid;
+ resource_size_t iobase;
+ resource_size_t irq;
+};
+struct platform_device *__init imx_add_ahci_imx(
+ const struct imx_ahci_imx_data *data,
+ const struct ahci_platform_data *pdata);
--
1.7.1
next reply other threads:[~2011-08-30 9:56 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-30 9:56 Richard Zhu [this message]
2011-08-30 9:56 ` [PATCH V7 2/5] ahci_plt Add the board_ids and pi refer to different features Richard Zhu
2011-08-30 9:56 ` [PATCH V7 3/5] MX53 Enable the AHCI SATA on MX53 ARD board Richard Zhu
2011-08-30 9:56 ` [PATCH V7 4/5] MX53 Enable the AHCI SATA on MX53 LOCO board Richard Zhu
2011-08-30 9:56 ` [PATCH V7 5/5] MX53 Enable the AHCI SATA on MX53 SMD board Richard Zhu
2011-08-30 10:37 ` [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms Wolfram Sang
2011-08-30 10:43 ` Hector Oron
2011-08-31 2:08 ` Richard Zhu
2011-08-31 12:57 ` Hector Oron
2011-09-01 3:09 ` Richard Zhu
2011-09-05 18:06 ` Eric Miao
2011-09-06 8:46 ` Hector Oron
2011-09-06 13:25 ` Eric Miao
2011-09-22 9:30 ` Hector Oron
2011-09-22 12:19 ` Eric Miao
2011-09-23 8:58 ` Hector Oron
2011-09-05 19:25 ` Arnaud Patard (Rtp)
-- strict thread matches above, loose matches on Subject: below --
2011-08-31 3:50 [PATCH V7 0/5] imx53 ahci driver v7 Richard Zhu
2011-08-31 3:50 ` [PATCH V7 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms Richard Zhu
2011-08-31 10:03 ` Arnaud Patard (Rtp)
2011-08-31 11:04 ` Eric Miao
2011-09-20 20:30 ` Sascha Hauer
2011-09-21 5:04 ` Richard Zhu
2011-09-21 7:02 ` Sascha Hauer
2011-09-21 7:32 ` Shawn Guo
2011-09-21 7:05 ` Richard Zhu
2011-09-22 18:12 ` Jeff Garzik
2011-09-22 18:31 ` Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314698171-7937-1-git-send-email-richard.zhu@linaro.org \
--to=richard.zhu@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).