From mboxrd@z Thu Jan 1 00:00:00 1970 From: jhovold@gmail.com (Johan Hovold) Date: Tue, 30 Aug 2011 18:48:16 +0200 Subject: [PATCH 1/2 RESEND] OMAP2+: pm: fix typos In-Reply-To: <87r543rkdk.fsf@ti.com> References: <87r543rkdk.fsf@ti.com> Message-ID: <1314722897-25040-1-git-send-email-jhovold@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Fix typos in comment and error message. Signed-off-by: Johan Hovold --- arch/arm/mach-omap2/pm.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 3feb359..fd77cf4 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -163,11 +163,11 @@ err: } /* - * This API is to be called during init to put the various voltage + * This API is to be called during init to set the various voltage * domains to the voltage as per the opp table. Typically we boot up * at the nominal voltage. So this function finds out the rate of * the clock associated with the voltage domain, finds out the correct - * opp entry and puts the voltage domain to the voltage specifies + * opp entry and sets the voltage domain to the voltage specified * in the opp entry */ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, @@ -218,7 +218,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, return 0; exit: - printk(KERN_ERR "%s: Unable to put vdd_%s to its init voltage\n\n", + printk(KERN_ERR "%s: Unable to set vdd_%s to its init voltage\n\n", __func__, vdd_name); return -EINVAL; } -- 1.7.6