From: jarkko.nikula@bitmer.com (Jarkko Nikula)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/14] omap: mcbsp: Make wakeup control generic
Date: Wed, 31 Aug 2011 18:22:52 +0300 [thread overview]
Message-ID: <1314804181-17260-6-git-send-email-jarkko.nikula@bitmer.com> (raw)
In-Reply-To: <1314804181-17260-1-git-send-email-jarkko.nikula@bitmer.com>
Currently wakeup control code is compiled only when CONFIG_ARCH_OMAP3 is
set even it should be available for CONFIG_ARCH_OMAP4 only builds also.
Fix this by making wakeup control generic so that it is executed whenever
new feature flag has_wakeup in platform data is set. Currently flag is set
for McBSP config types 3 and 4.
Remove also old comments about idle mode settings and HW bug workarounds
that were not updated during hwmod conversion.
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
---
arch/arm/mach-omap2/mcbsp.c | 3 ++
arch/arm/plat-omap/include/plat/mcbsp.h | 3 ++
arch/arm/plat-omap/mcbsp.c | 43 ++++++------------------------
3 files changed, 15 insertions(+), 34 deletions(-)
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a157e3e..628497e 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -141,6 +141,9 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
pdata->buffer_size = 0x80;
}
+ if (oh->class->rev >= MCBSP_CONFIG_TYPE3)
+ pdata->has_wakeup = true;
+
oh_device[0] = oh;
if (oh->dev_attr) {
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index 14bc1cb..ac48d83 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -317,6 +317,9 @@ struct omap_mcbsp_platform_data {
u16 buffer_size;
u8 reg_size;
u8 reg_step;
+
+ /* McBSP platform and instance specific features */
+ bool has_wakeup; /* Wakeup capability */
};
struct omap_mcbsp_st_data {
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 623f2c1..0338ad0 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -659,35 +659,7 @@ int omap_mcbsp_get_dma_op_mode(unsigned int id)
}
EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode);
-static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
-{
- /*
- * Enable wakup behavior, smart idle and all wakeups
- * REVISIT: some wakeups may be unnecessary
- */
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
- }
-}
-
-static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
-{
- /*
- * Disable wakup behavior, smart idle and all wakeups
- */
- if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
- /*
- * HW bug workaround - If no_idle mode is taken, we need to
- * go to smart_idle before going to always_idle, or the
- * device will not hit retention anymore.
- */
-
- MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
- }
-}
#else
-static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {}
-static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {}
static inline void omap_st_start(struct omap_mcbsp *mcbsp) {}
static inline void omap_st_stop(struct omap_mcbsp *mcbsp) {}
#endif
@@ -726,8 +698,9 @@ int omap_mcbsp_request(unsigned int id)
pm_runtime_get_sync(mcbsp->dev);
- /* Do procedure specific to omap34xx arch, if applicable */
- omap34xx_mcbsp_request(mcbsp);
+ /* Enable wakeup behavior */
+ if (mcbsp->pdata->has_wakeup)
+ MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN);
/*
* Make sure that transmitter, receiver and sample-rate generator are
@@ -764,8 +737,9 @@ err_clk_disable:
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(id);
- /* Do procedure specific to omap34xx arch, if applicable */
- omap34xx_mcbsp_free(mcbsp);
+ /* Disable wakeup behavior */
+ if (mcbsp->pdata->has_wakeup)
+ MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
pm_runtime_put_sync(mcbsp->dev);
@@ -794,8 +768,9 @@ void omap_mcbsp_free(unsigned int id)
if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
mcbsp->pdata->ops->free(id);
- /* Do procedure specific to omap34xx arch, if applicable */
- omap34xx_mcbsp_free(mcbsp);
+ /* Disable wakeup behavior */
+ if (mcbsp->pdata->has_wakeup)
+ MCBSP_WRITE(mcbsp, WAKEUPEN, 0);
pm_runtime_put_sync(mcbsp->dev);
--
1.7.5.4
next prev parent reply other threads:[~2011-08-31 15:22 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-31 15:22 [PATCH 00/14] McBSP cleanup and generalization Jarkko Nikula
2011-08-31 15:22 ` [PATCH 01/14] omap: mcbsp: Remove omap device API Jarkko Nikula
2011-08-31 15:22 ` [PATCH 02/14] omap: mcbsp: Remove unused variables from platform data Jarkko Nikula
2011-08-31 15:22 ` [PATCH 03/14] omap: mcbsp: Move out omap_mcbsp_register_board_cfg from plat-omap/devices.c Jarkko Nikula
2011-08-31 15:22 ` [PATCH 04/14] omap: mcbsp: Implement generic register access Jarkko Nikula
2011-08-31 15:22 ` Jarkko Nikula [this message]
2011-08-31 15:22 ` [PATCH 06/14] omap: mcbsp: Make tranceiver configuration control register access generic Jarkko Nikula
2011-08-31 15:22 ` [PATCH 07/14] omap: mcbsp: Make threshold based transfer code generic Jarkko Nikula
2011-08-31 15:22 ` [PATCH 08/14] omap: mcbsp: Use per instance register cache size Jarkko Nikula
2011-08-31 15:22 ` [PATCH 09/14] omap: mcbsp: Move sidetone clock management to mach-omap2/mcbsp.c Jarkko Nikula
2011-08-31 15:22 ` [PATCH 10/14] omap: mcbsp: Cleanup sidetone control initialization and make it generic Jarkko Nikula
2011-08-31 15:22 ` [PATCH 11/14] omap: mcbsp: Update mcbsp.h include dependencies Jarkko Nikula
2011-08-31 15:22 ` [PATCH 12/14] omap: mcbsp: Move address definitions to arch/arm/mach-omap1/mcbsp.c Jarkko Nikula
2011-08-31 15:23 ` [PATCH 13/14] omap: mcbsp: Start generalize omap2_mcbsp_set_clks_src Jarkko Nikula
2011-08-31 15:23 ` [PATCH 14/14] omap: mcbsp: Start generalize signal muxing functions Jarkko Nikula
2011-09-02 22:47 ` [PATCH 00/14] McBSP cleanup and generalization Kevin Hilman
2011-09-07 6:46 ` Péter Ujfalusi
2011-09-07 22:53 ` Janusz Krzysztofik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314804181-17260-6-git-send-email-jarkko.nikula@bitmer.com \
--to=jarkko.nikula@bitmer.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).