From mboxrd@z Thu Jan 1 00:00:00 1970 From: b-cousson@ti.com (Benoit Cousson) Date: Thu, 1 Sep 2011 19:25:08 +0200 Subject: [PATCH 3/7] arm/dts: OMAP3: Add i2c controllers nodes In-Reply-To: <1314897912-18178-1-git-send-email-b-cousson@ti.com> References: <1314897912-18178-1-git-send-email-b-cousson@ti.com> Message-ID: <1314897912-18178-4-git-send-email-b-cousson@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add i2c controllers nodes into the main ocp bus. Signed-off-by: Benoit Cousson Cc: G, Manjunath Kondaiah --- arch/arm/boot/dts/omap3.dtsi | 27 +++++++++++++++++++++++++++ 1 files changed, 27 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 5a95a69..aab2129 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -13,6 +13,12 @@ / { compatible = "ti,omap3430", "ti,omap3"; + aliases { + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + }; + /* * XXX: The cpus node is mandatory, but since the CPUs are as well part * of the mpu subsystem below, it is not clear where the information @@ -64,5 +70,26 @@ interrupt-controller; #interrupt-cells = <1>; }; + + i2c1: i2c at 1 { + compatible = "ti,omap3-i2c", "ti,omap-i2c"; + #address-cells = <1>; + #size-cells = <0>; + hwmods = "i2c1"; + }; + + i2c2: i2c at 2 { + compatible = "ti,omap3-i2c", "ti,omap-i2c"; + #address-cells = <1>; + #size-cells = <0>; + hwmods = "i2c2"; + }; + + i2c3: i2c at 3 { + compatible = "ti,omap3-i2c", "ti,omap-i2c"; + #address-cells = <1>; + #size-cells = <0>; + hwmods = "i2c3"; + }; }; }; -- 1.7.0.4