From: santosh.shilimkar@ti.com (Santosh Shilimkar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 01/25] ARM: mm: Add strongly ordered descriptor support.
Date: Sun, 4 Sep 2011 19:24:02 +0530 [thread overview]
Message-ID: <1315144466-9395-2-git-send-email-santosh.shilimkar@ti.com> (raw)
In-Reply-To: <1315144466-9395-1-git-send-email-santosh.shilimkar@ti.com>
On certain architectures, there might be a need to mark certain
addresses with strongly ordered memory attributes to avoid ordering
issues at the interconnect level.
On OMAP4, the asynchronous bridge buffers can only be drained
with strongly ordered accesses and hence the need to mark the
memory strongly ordered.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Woodruff Richard <r-woodruff2@ti.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/include/asm/mach/map.h | 1 +
arch/arm/include/asm/pgtable.h | 3 +++
arch/arm/mm/mmu.c | 8 ++++++++
3 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index d2fedb5..b36f365 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -29,6 +29,7 @@ struct map_desc {
#define MT_MEMORY_NONCACHED 11
#define MT_MEMORY_DTCM 12
#define MT_MEMORY_ITCM 13
+#define MT_MEMORY_SO 14
#ifdef CONFIG_MMU
extern void iotable_init(struct map_desc *, int);
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 5750704..f1956b2 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -232,6 +232,9 @@ extern pgprot_t pgprot_kernel;
#define pgprot_writecombine(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
+#define pgprot_stronglyordered(prot) \
+ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
+
#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
#define pgprot_dmacoherent(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE | L_PTE_XN)
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 594d677..ea9c9f3 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -273,6 +273,14 @@ static struct mem_type mem_types[] = {
.prot_l1 = PMD_TYPE_TABLE,
.domain = DOMAIN_KERNEL,
},
+ [MT_MEMORY_SO] = {
+ .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+ L_PTE_MT_UNCACHED,
+ .prot_l1 = PMD_TYPE_TABLE,
+ .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S |
+ PMD_SECT_UNCACHED | PMD_SECT_XN,
+ .domain = DOMAIN_KERNEL,
+ },
};
const struct mem_type *get_mem_type(unsigned int type)
--
1.7.4.1
next prev parent reply other threads:[~2011-09-04 13:54 UTC|newest]
Thread overview: 119+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-04 13:54 [PATCH 00/25] OMAP4: PM: suspend, CPU-hotplug and CPUilde support Santosh Shilimkar
2011-09-04 13:54 ` Santosh Shilimkar [this message]
2011-09-13 20:23 ` [PATCH 01/25] ARM: mm: Add strongly ordered descriptor support Tony Lindgren
2011-09-14 5:36 ` Shilimkar, Santosh
2011-09-04 13:54 ` [PATCH 02/25] OMAP4: Redefine mandatory barriers for OMAP to include interconnect barriers Santosh Shilimkar
2011-09-13 20:27 ` Tony Lindgren
2011-09-14 5:39 ` Shilimkar, Santosh
2011-09-14 10:24 ` Santosh
2011-09-15 17:17 ` Kevin Hilman
2011-09-15 17:24 ` Shilimkar, Santosh
2011-09-15 17:53 ` Tony Lindgren
2011-09-15 18:22 ` Shilimkar, Santosh
2011-09-15 19:43 ` Tony Lindgren
2011-09-15 20:00 ` Shilimkar, Santosh
2011-09-16 12:01 ` Shilimkar, Santosh
2011-09-04 13:54 ` [PATCH 03/25] OMAP4: PM: Use custom omap_do_wfi() for suspend and default idle Santosh Shilimkar
2011-09-04 13:54 ` [PATCH 04/25] OMAP4: Remove un-used do_wfi() macro Santosh Shilimkar
2011-09-04 13:54 ` [PATCH 05/25] OMAP4: Use WARN_ON() instead of BUG_ON() with graceful exit Santosh Shilimkar
2011-09-05 10:11 ` Sergei Shtylyov
2011-09-05 10:42 ` Santosh
2011-09-05 10:47 ` Russell King - ARM Linux
2011-09-05 10:51 ` Santosh
2011-09-08 18:51 ` Jean Pihet
2011-09-04 13:54 ` [PATCH 06/25] OMAP4: Export omap4_get_base*() rather than global address pointers Santosh Shilimkar
2011-09-04 13:54 ` [PATCH 07/25] OMAP4: PM: Add SAR RAM support Santosh Shilimkar
2011-09-04 13:54 ` [PATCH 08/25] OMAP4: PM: Keep static dep between MPUSS-EMIF and MPUSS-L3 and DUCATI-L3 Santosh Shilimkar
2011-09-08 18:06 ` Kevin Hilman
2011-09-09 4:21 ` Santosh
2011-09-04 13:54 ` [PATCH 09/25] OMAP4: PM: Avoid omap4_pm_init() on OMAP4430 ES1.0 Santosh Shilimkar
2011-09-04 13:54 ` [PATCH 10/25] OMAP4: PM: Initialise all the clockdomains to supported states Santosh Shilimkar
2011-09-04 13:54 ` [PATCH 11/25] OMAP: Add Secure HAL and monitor mode API infrastructure Santosh Shilimkar
2011-09-08 18:58 ` Jean Pihet
2011-09-09 4:22 ` Santosh
2011-09-04 13:54 ` [PATCH 12/25] OMAP: Add support to allocate the memory for secure RAM Santosh Shilimkar
2011-09-08 19:19 ` Jean Pihet
2011-09-09 9:43 ` Santosh
2011-09-09 12:54 ` Jean Pihet
2011-09-09 14:09 ` Shilimkar, Santosh
2011-09-04 13:54 ` [PATCH 13/25] OMAP4: PM: Add WakeupGen module as OMAP gic_arch_extn Santosh Shilimkar
2011-09-08 18:27 ` Kevin Hilman
2011-09-09 4:29 ` Santosh
2011-09-09 7:19 ` Thomas Gleixner
2011-09-09 8:07 ` Santosh
2011-09-09 8:18 ` Thomas Gleixner
2011-09-09 9:05 ` Santosh
2011-09-12 7:56 ` Thomas Gleixner
2011-09-12 8:44 ` Santosh
2011-09-08 19:16 ` Jean Pihet
2011-09-09 4:23 ` Santosh
2011-09-13 20:36 ` Tony Lindgren
2011-09-14 5:34 ` Shilimkar, Santosh
2011-09-14 15:21 ` Tony Lindgren
2011-09-14 16:49 ` Santosh
2011-09-14 17:08 ` Tony Lindgren
2011-09-14 17:13 ` Santosh
2011-09-14 17:18 ` Tony Lindgren
2011-09-14 17:21 ` Santosh
2011-09-14 17:22 ` Santosh
2011-09-14 19:04 ` Tony Lindgren
2011-09-15 2:57 ` Santosh
2011-09-15 9:36 ` Cousson, Benoit
2011-09-15 12:02 ` Shilimkar, Santosh
2011-09-15 13:29 ` Woodruff, Richard
2011-09-04 13:54 ` [PATCH 14/25] OMAP4: PM: Add CPUX OFF mode support Santosh Shilimkar
2011-09-08 19:39 ` Jean Pihet
2011-09-09 9:59 ` Santosh
2011-09-09 8:04 ` Shawn Guo
2011-09-09 8:09 ` Santosh
2011-09-09 14:13 ` Shawn Guo
2011-09-09 14:11 ` Shilimkar, Santosh
2011-09-09 15:27 ` Shawn Guo
2011-09-09 16:59 ` Santosh
2011-09-09 18:34 ` Kevin Hilman
2011-09-10 3:39 ` Shilimkar, Santosh
2011-09-09 23:34 ` Shawn Guo
2011-09-10 3:38 ` Shilimkar, Santosh
2011-09-10 4:54 ` Shawn Guo
2011-09-10 5:51 ` Santosh
2011-09-12 21:06 ` Kevin Hilman
2011-09-13 5:39 ` Santosh
2011-09-13 17:33 ` Kevin Hilman
2011-09-14 5:26 ` Shilimkar, Santosh
2011-09-04 13:54 ` [PATCH 15/25] OMAP4: Remove __INIT from omap_secondary_startup() to re-use it for hotplug Santosh Shilimkar
2011-09-04 13:54 ` [PATCH 16/25] OMAP4: PM: Program CPU1 to hit OFF when off-lined Santosh Shilimkar
2011-09-12 21:12 ` Kevin Hilman
2011-09-13 5:35 ` Santosh
2011-09-04 13:54 ` [PATCH 17/25] OMAP4: PM: CPU1 wakeup workaround from Low power modes Santosh Shilimkar
2011-09-04 13:54 ` [PATCH 18/25] OMAP4: suspend: Add MPUSS power domain RETENTION support Santosh Shilimkar
2011-09-15 0:27 ` Kevin Hilman
2011-09-15 3:19 ` Santosh
2011-09-04 13:54 ` [PATCH 19/25] OMAP4: PM: Add WakeupGen and secure GIC low power support Santosh Shilimkar
2011-09-04 13:54 ` [PATCH 20/25] OMAP4: PM: Add L2X0 cache lowpower support Santosh Shilimkar
2011-09-05 14:01 ` Lorenzo Pieralisi
2011-09-05 14:13 ` Santosh
2011-09-16 17:23 ` Kevin Hilman
2011-09-18 8:46 ` Santosh
2011-09-04 13:54 ` [PATCH 21/25] OMAP4: PM: Add MPUSS power domain OSWR support Santosh Shilimkar
2011-09-12 18:52 ` Kevin Hilman
2011-09-13 5:37 ` Santosh
2011-09-13 7:39 ` Jean Pihet
2011-09-13 8:25 ` Santosh
2011-09-04 13:54 ` [PATCH 22/25] OMAP4: PM: Add power domain statistics support Santosh Shilimkar
2011-09-05 10:08 ` Sergei Shtylyov
2011-09-05 10:43 ` Santosh
2011-09-04 13:54 ` [PATCH 23/25] OMAP4: PM: Add CPUidle support Santosh Shilimkar
2011-09-16 17:45 ` Kevin Hilman
2011-09-18 8:47 ` Santosh
2011-09-04 13:54 ` [PATCH 24/25] OMAP4: cpuidle: Switch to gptimer from twd in deeper C-states Santosh Shilimkar
2011-09-16 17:51 ` Kevin Hilman
2011-09-18 8:48 ` Santosh
2011-09-04 13:54 ` [PATCH 25/25] OMAP3: CPUidle: Make use of CPU PM notifiers Santosh Shilimkar
2011-09-08 17:57 ` Kevin Hilman
2011-09-09 4:20 ` Santosh
2011-09-09 7:17 ` Santosh
2011-09-08 20:15 ` [PATCH 00/25] OMAP4: PM: suspend, CPU-hotplug and CPUilde support Jean Pihet
2011-09-09 4:25 ` Santosh
2011-09-20 11:24 ` Vishwanath Sripathy
2011-09-20 11:37 ` Santosh
2011-09-20 11:57 ` Santosh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1315144466-9395-2-git-send-email-santosh.shilimkar@ti.com \
--to=santosh.shilimkar@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).