From: govindraj.raja@ti.com (Govindraj.R)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 02/11] OMAP2+: hwmod: Add API to check IO PAD wakeup status
Date: Wed, 7 Sep 2011 18:23:24 +0530 [thread overview]
Message-ID: <1315400013-4849-3-git-send-email-govindraj.raja@ti.com> (raw)
In-Reply-To: <1315400013-4849-1-git-send-email-govindraj.raja@ti.com>
Add API to determine IO-PAD wakeup event status for a given
hwmod dynamic_mux pad.
Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
---
arch/arm/mach-omap2/mux.c | 30 ++++++++++++++++++++++++++
arch/arm/mach-omap2/mux.h | 13 +++++++++++
arch/arm/mach-omap2/omap_hwmod.c | 7 ++++++
arch/arm/plat-omap/include/plat/omap_hwmod.h | 1 +
4 files changed, 51 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 655e948..5f15ab8 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -351,6 +351,36 @@ err1:
return NULL;
}
+/**
+ * omap_hwmod_mux_get_wake_status - omap hwmod check pad wakeup
+ * @hmux: Pads for a hwmod
+ *
+ * Gets the wakeup status of given pad from omap-hwmod.
+ * Returns true if wakeup event is set for pad else false
+ * if wakeup is not occured or pads are not avialable.
+ */
+bool omap_hwmod_mux_get_wake_status(struct omap_hwmod_mux_info *hmux)
+{
+ int i;
+ unsigned int val;
+ u8 ret = false;
+
+ for (i = 0; i < hmux->nr_pads; i++) {
+ struct omap_device_pad *pad = &hmux->pads[i];
+
+ if (pad->flags & OMAP_DEVICE_PAD_WAKEUP) {
+ val = omap_mux_read(pad->partition,
+ pad->mux->reg_offset);
+ if (val & OMAP_WAKEUP_EVENT) {
+ ret = true;
+ break;
+ }
+ }
+ }
+
+ return ret;
+}
+
/* Assumes the calling function takes care of locking */
void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state)
{
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 2132308..8b2150a 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -225,8 +225,21 @@ omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads);
*/
void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state);
+/**
+ * omap_hwmod_mux_get_wake_status - omap hwmod check pad wakeup
+ * @hmux: Pads for a hwmod
+ *
+ * Called only from omap_hwmod.c, do not use.
+ */
+bool omap_hwmod_mux_get_wake_status(struct omap_hwmod_mux_info *hmux);
#else
+static inline bool
+omap_hwmod_mux_get_wake_status(struct omap_hwmod_mux_info *hmux)
+{
+ return 0;
+}
+
static inline int omap_mux_init_gpio(int gpio, int val)
{
return 0;
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index e751dd9..a8b24d7 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2724,3 +2724,10 @@ int omap_hwmod_no_setup_reset(struct omap_hwmod *oh)
return 0;
}
+
+int omap_hwmod_pad_get_wakeup_status(struct omap_hwmod *oh)
+{
+ if (oh && oh->mux)
+ return omap_hwmod_mux_get_wake_status(oh->mux);
+ return -EINVAL;
+}
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 0e329ca..9a6195c 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -607,6 +607,7 @@ u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
+int omap_hwmod_pad_get_wakeup_status(struct omap_hwmod *oh);
/*
* Chip variant-specific hwmod init routines - XXX should be converted
* to use initcalls once the initial boot ordering is straightened out
--
1.7.4.1
next prev parent reply other threads:[~2011-09-07 12:53 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-07 12:53 [PATCH v4 00/11] OMAP2+: Serial: Runtime adaptation + cleanup Govindraj.R
2011-09-07 12:53 ` [PATCH v4 01/11] OMAP2+: hwmod: Add API to enable IO ring wakeup Govindraj.R
2011-09-07 12:53 ` Govindraj.R [this message]
2011-09-07 12:53 ` [PATCH v4 03/11] OMAP2+: UART: cleanup + remove certain uart calls from pm code Govindraj.R
2011-09-07 12:53 ` [PATCH v4 04/11] OMAP2+: UART: Remove uart clock handling code from serial.c Govindraj.R
2011-09-08 23:39 ` Kevin Hilman
2011-09-09 5:22 ` Govindraj
2011-09-07 12:53 ` [PATCH v4 05/11] OMAP2+: Serial: Add default mux for all uarts Govindraj.R
2011-09-07 12:53 ` [PATCH v4 06/11] Serial: OMAP: Store certain reg values to port structure Govindraj.R
2011-09-07 12:53 ` [PATCH v4 07/11] Serial: OMAP: Add runtime pm support for omap-serial driver Govindraj.R
2011-09-09 0:24 ` Kevin Hilman
2011-09-09 6:32 ` Govindraj
2011-09-09 18:14 ` Kevin Hilman
2011-09-12 6:55 ` Govindraj
2011-09-12 6:58 ` Govindraj
2011-09-12 17:01 ` Kevin Hilman
2011-09-07 12:53 ` [PATCH v4 08/11] Serial: OMAP2+: Move erratum handling from serial.c Govindraj.R
2011-09-07 12:53 ` [PATCH v4 09/11] OMAP2+: Serial: Use prepare and resume calls to gate uart clocks Govindraj.R
2011-09-09 18:59 ` Kevin Hilman
2011-09-12 6:37 ` Govindraj
2011-09-07 12:53 ` [PATCH v4 10/11] OMAP: Serial: Allow UART parameters to be configured from board file Govindraj.R
2011-09-09 19:11 ` Kevin Hilman
2011-09-12 6:34 ` Govindraj
2011-09-07 12:53 ` [PATCH v4 11/11] Serial: OMAP2+: Make the RX_TIMEOUT for DMA configurable for each UART Govindraj.R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1315400013-4849-3-git-send-email-govindraj.raja@ti.com \
--to=govindraj.raja@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).