[PATCH v2 4/6] OMAP3+: use DPLLs recalc function instead of omap2_get_dpll_rate

[jon-hunter@ti.com (Jon Hunter)]

From: Jon Hunter <jon-hunter@ti.com>

This is a continuation of Mike Turquette's patch "OMAP3+: use
DPLL's round_rate when setting rate".

omap3_noncore_dpll_set_rate() and omap3_noncore_dpll_enable() call
omap2_get_dpll_rate() explicitly. It may be necessary for some
DPLLs to use a different function and so use the DPLLs recalc()
function pointer instead.

An example is the DPLL_ABE on OMAP4 which can have a 4X multiplier
in addition to the usual MN multipler and dividers and therefore
uses a different round_rate and recalc function.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
---
 arch/arm/mach-omap2/dpll3xxx.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 73a1595..7916f66 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -390,7 +390,7 @@ int omap3_noncore_dpll_enable(struct clk *clk)
 	 * propagating?
 	 */
 	if (!r)
-		clk->rate = omap2_get_dpll_rate(clk);
+		clk->rate = clk->recalc(clk);
 
 	return r;
 }
@@ -435,7 +435,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
 	if (!dd)
 		return -EINVAL;
 
-	if (rate == omap2_get_dpll_rate(clk))
+	if (rate == clk->recalc(clk))
 		return 0;
 
 	/*
-- 
1.7.4.1