From: pdeschrijver@nvidia.com (Peter De Schrijver)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] arm/tegra: device tree support for ventana board
Date: Thu, 22 Sep 2011 13:13:04 +0300 [thread overview]
Message-ID: <1316686384-20236-4-git-send-email-pdeschrijver@nvidia.com> (raw)
In-Reply-To: <1316686384-20236-1-git-send-email-pdeschrijver@nvidia.com>
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
arch/arm/boot/dts/tegra-ventana.dts | 32 ++++++++++++++++++++++++++++++++
arch/arm/mach-tegra/Kconfig | 6 ++++++
arch/arm/mach-tegra/Makefile.boot | 1 +
arch/arm/mach-tegra/board-dt.c | 5 ++++-
4 files changed, 43 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/boot/dts/tegra-ventana.dts
diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts
new file mode 100644
index 0000000..9b29a62
--- /dev/null
+++ b/arch/arm/boot/dts/tegra-ventana.dts
@@ -0,0 +1,32 @@
+/dts-v1/;
+
+/memreserve/ 0x1c000000 0x04000000;
+/include/ "tegra20.dtsi"
+
+/ {
+ model = "NVIDIA Tegra2 Ventana evaluation board";
+ compatible = "nvidia,ventana", "nvidia,tegra20";
+
+ chosen {
+ bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/ram rdinit=/sbin/init";
+ };
+
+ memory {
+ reg = < 0x00000000 0x40000000 >;
+ };
+
+ serial at 70006300 {
+ clock-frequency = < 216000000 >;
+ };
+
+ sdhci at c8000400 {
+ cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+ power-gpios = <&gpio 155 0>; /* gpio PT3 */
+ };
+
+ sdhci at c8000600 {
+ power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ support-8bit;
+ };
+};
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index d82ebab..91aff7c 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -69,6 +69,12 @@ config MACH_WARIO
help
Support for the Wario version of Seaboard
+config MACH_VENTANA
+ bool "Ventana board"
+ select MACH_TEGRA_DT
+ help
+ Support for the nVidia Ventana development platform
+
choice
prompt "Low-level debug console UART"
default TEGRA_DEBUG_UART_NONE
diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot
index 5e870d2..bd12c9f 100644
--- a/arch/arm/mach-tegra/Makefile.boot
+++ b/arch/arm/mach-tegra/Makefile.boot
@@ -4,3 +4,4 @@ initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000
dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb
dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb
+dtb-$(CONFIG_MACH_VENTANA) += tegra-ventana.dtb
diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c
index 9f47e04..5885102 100644
--- a/arch/arm/mach-tegra/board-dt.c
+++ b/arch/arm/mach-tegra/board-dt.c
@@ -47,7 +47,7 @@
void harmony_pinmux_init(void);
void seaboard_pinmux_init(void);
-
+void ventana_pinmux_init(void);
struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
@@ -95,6 +95,8 @@ static void __init tegra_dt_init(void)
harmony_pinmux_init();
else if (of_machine_is_compatible("nvidia,seaboard"))
seaboard_pinmux_init();
+ else if (of_machine_is_compatible("nvidia,ventana"))
+ ventana_pinmux_init();
/*
* Finished with the static registrations now; fill in the missing
@@ -106,6 +108,7 @@ static void __init tegra_dt_init(void)
static const char * tegra_dt_board_compat[] = {
"nvidia,harmony",
"nvidia,seaboard",
+ "nvidia,ventana",
NULL
};
--
1.7.1
prev parent reply other threads:[~2011-09-22 10:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-22 10:13 [PATCH 0/3] Add support for tegra2 based ventana board Peter De Schrijver
2011-09-22 10:13 ` [PATCH 1/3] arm/tegra: prepare Seaboard pinmux code for derived boards Peter De Schrijver
2011-09-22 10:13 ` [PATCH 2/3] arm/tegra: add support for ventana pinmuxing Peter De Schrijver
2011-09-22 16:53 ` Stephen Warren
2011-09-22 10:13 ` Peter De Schrijver [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1316686384-20236-4-git-send-email-pdeschrijver@nvidia.com \
--to=pdeschrijver@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox