From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 07/14] ARM: tegra2: convert to CONFIG_MULTI_IRQ_HANDLER
Date: Fri, 23 Sep 2011 17:51:25 +0100 [thread overview]
Message-ID: <1316796692-15964-8-git-send-email-marc.zyngier@arm.com> (raw)
In-Reply-To: <1316796692-15964-1-git-send-email-marc.zyngier@arm.com>
Convert the tegra2 platforms to be using the gic_handle_irq
function as their primary interrupt handler.
Tested on harmony.
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Colin Cross <ccross@android.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm/mach-tegra/Kconfig | 1 +
arch/arm/mach-tegra/board-dt.c | 2 ++
arch/arm/mach-tegra/board-harmony.c | 2 ++
arch/arm/mach-tegra/board-paz00.c | 2 ++
arch/arm/mach-tegra/board-seaboard.c | 4 ++++
arch/arm/mach-tegra/board-trimslice.c | 2 ++
arch/arm/mach-tegra/include/mach/entry-macro.S | 22 ++--------------------
7 files changed, 15 insertions(+), 20 deletions(-)
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index d82ebab..ba0ac3f 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -13,6 +13,7 @@ config ARCH_TEGRA_2x_SOC
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select USB_ULPI if USB_SUPPORT
select USB_ULPI_VIEWPORT if USB_SUPPORT
+ select MULTI_IRQ_HANDLER
help
Support for NVIDIA Tegra AP20 and T20 processors, based on the
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c
index 0b3f937..cfa39c5 100644
--- a/arch/arm/mach-tegra/board-dt.c
+++ b/arch/arm/mach-tegra/board-dt.c
@@ -32,6 +32,7 @@
#include <linux/i2c.h>
#include <linux/i2c-tegra.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@@ -115,6 +116,7 @@ DT_MACHINE_START(TEGRA_DT, "nVidia Tegra (Flattened Device Tree)")
.soc = &tegra_soc_desc,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
+ .handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_dt_init,
.dt_compat = tegra_dt_board_compat,
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index 10f7ce0..da4f768 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -31,6 +31,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
#include <asm/setup.h>
#include <mach/tegra_wm8903_pdata.h>
@@ -189,6 +190,7 @@ MACHINE_START(HARMONY, "harmony")
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
+ .handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_harmony_init,
MACHINE_END
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 5b0b839..b14f517 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -28,6 +28,7 @@
#include <linux/i2c.h>
#include <linux/rfkill-gpio.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
@@ -192,6 +193,7 @@ MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
+ .handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_paz00_init,
MACHINE_END
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index dfd9c95..7fd71cf 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -34,6 +34,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
#include "board.h"
#include "board-seaboard.h"
@@ -286,6 +287,7 @@ MACHINE_START(SEABOARD, "seaboard")
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
+ .handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_seaboard_init,
MACHINE_END
@@ -296,6 +298,7 @@ MACHINE_START(KAEN, "kaen")
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
+ .handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_kaen_init,
MACHINE_END
@@ -306,6 +309,7 @@ MACHINE_START(WARIO, "wario")
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
+ .handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_wario_init,
MACHINE_END
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index 2ce45a6..730f77a 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -26,6 +26,7 @@
#include <linux/i2c.h>
#include <linux/gpio.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/setup.h>
@@ -179,6 +180,7 @@ MACHINE_START(TRIMSLICE, "trimslice")
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
+ .handle_irq = gic_handle_irq,
.timer = &tegra_timer,
.init_machine = tegra_trimslice_init,
MACHINE_END
diff --git a/arch/arm/mach-tegra/include/mach/entry-macro.S b/arch/arm/mach-tegra/include/mach/entry-macro.S
index dd165c5..ac11262 100644
--- a/arch/arm/mach-tegra/include/mach/entry-macro.S
+++ b/arch/arm/mach-tegra/include/mach/entry-macro.S
@@ -12,30 +12,15 @@
* GNU General Public License for more details.
*
*/
-#include <mach/iomap.h>
-#include <mach/io.h>
-
-#if defined(CONFIG_ARM_GIC)
-#define HAVE_GET_IRQNR_PREAMBLE
-#include <asm/hardware/entry-macro-gic.S>
-
- /* Uses the GIC interrupt controller built into the cpu */
-#define ICTRL_BASE (IO_CPU_VIRT + 0x100)
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- movw \base, #(ICTRL_BASE & 0x0000ffff)
- movt \base, #((ICTRL_BASE & 0xffff0000) >> 16)
+ .macro arch_ret_to_user, tmp1, tmp2
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-#else
+#if !defined(CONFIG_ARM_GIC)
/* legacy interrupt controller for AP16 */
- .macro disable_fiq
- .endm
.macro get_irqnr_preamble, base, tmp
@ enable imprecise aborts
@@ -46,9 +31,6 @@
orr \base, #0x0000f000
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, [\base, #0x20] @ EVT_IRQ_STS
cmp \irqnr, #0x80
--
1.7.0.4
next prev parent reply other threads:[~2011-09-23 16:51 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-23 16:51 [RFC PATCH 00/14] Switch GIC users (and omap2plus) to CONFIG_MULTI_IRQ_HANDLER Marc Zyngier
2011-09-23 16:51 ` [RFC PATCH 01/14] ARM: GIC: Add global gic_handle_irq() function Marc Zyngier
2011-09-23 20:18 ` Russell King - ARM Linux
2011-09-26 10:40 ` Marc Zyngier
2011-09-23 16:51 ` [RFC PATCH 02/14] ARM: RealView: convert to CONFIG_MULTI_IRQ_HANDLER Marc Zyngier
2011-09-23 16:51 ` [RFC PATCH 03/14] ARM: VExpress: " Marc Zyngier
2011-09-23 16:51 ` [RFC PATCH 04/14] ARM: msm: convert SMP platforms " Marc Zyngier
2011-09-23 16:51 ` [RFC PATCH 05/14] ARM: GIC: Add global gic_handle_irq_offset() function Marc Zyngier
2011-09-23 16:51 ` [RFC PATCH 06/14] ARM: exynos4: convert to CONFIG_MULTI_IRQ_HANDLER Marc Zyngier
2011-09-23 16:51 ` Marc Zyngier [this message]
2011-09-23 17:28 ` [RFC PATCH 07/14] ARM: tegra2: " Stephen Warren
2011-09-23 16:51 ` [RFC PATCH 08/14] ARM: ux500: " Marc Zyngier
2011-09-23 16:51 ` [RFC PATCH 09/14] ARM: shmobile: convert smp platforms to gic_handle_irq() Marc Zyngier
2011-09-23 16:51 ` [RFC PATCH 10/14] ARM: cns3xxx: convert to CONFIG_MULTI_IRQ_HANDLER Marc Zyngier
2011-09-26 13:15 ` Anton Vorontsov
2011-09-23 16:51 ` [RFC PATCH 11/14] ARM: zynq: " Marc Zyngier
2011-09-23 20:53 ` John Linn
2011-09-23 16:51 ` [RFC PATCH 12/14] ARM: omap2/3: Add global omap2/3_intc_handle_irq() functions Marc Zyngier
2011-09-23 16:51 ` [RFC PATCH 13/14] ARM: omap2plus: convert to CONFIG_MULTI_IRQ_HANDLER Marc Zyngier
2011-09-23 16:51 ` [RFC PATCH 14/14] ARM: GIC: Make MULTI_IRQ_HANDLER mandatory Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1316796692-15964-8-git-send-email-marc.zyngier@arm.com \
--to=marc.zyngier@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).