[PATCH v3 0/6] OMAP: omap_device cleanup before device-tree integration

[PATCH v3 0/6] OMAP: omap_device cleanup before device-tree integration

[Benoit Cousson]

Hi Kevin,

Here are a couple of cleanups on top of your for_3.2/omap_device branch.

patches are available here:
git://gitorious.org/omap-pm/linux.git for_3.2/1_omap_device_cleanup

Regards,
Benoit


Changes since v1: http://www.spinics.net/lists/linux-omap/msg55801.html
 - Update the 2 patches from Nishanth based on Kevin's comment and merge
   them into one patch.
 - Fix the omap_device_pm_latency issue reported by Paul.

Changes since v2: http://www.spinics.net/lists/arm-kernel/msg138993.html
 - Change the API name from omap_hwmod_name_get_dev to 
   omap_device_get_by_hwmod_name per Kevin's suggestion.
 

Benoit Cousson (5):
  OMAP3: beagle-board: Use the omap_hwmod_name_get_dev API
  OMAP2+: pm: Use hwmod name instead of dev pointer
  OMAP2+: pm: Remove static devices variable for mpu, dsp, iva and l3 PM
  OMAP: omap_device: Create a default omap_device_pm_latency
  OMAP2+: devices: Remove all omap_device_pm_latency structures

Nishanth Menon (1):
  OMAP: omap_device: Add omap_device_get_by_hwmod_name

 arch/arm/mach-omap2/board-omap3beagle.c       |    4 +-
 arch/arm/mach-omap2/devices.c                 |   46 ++---------------
 arch/arm/mach-omap2/display.c                 |   11 +----
 arch/arm/mach-omap2/dma.c                     |   11 +----
 arch/arm/mach-omap2/gpio.c                    |   12 +----
 arch/arm/mach-omap2/hsmmc.c                   |   18 +------
 arch/arm/mach-omap2/hwspinlock.c              |   12 +----
 arch/arm/mach-omap2/mcbsp.c                   |   11 +----
 arch/arm/mach-omap2/pm.c                      |   69 ++++++++-----------------
 arch/arm/mach-omap2/serial.c                  |   25 +---------
 arch/arm/mach-omap2/sr_device.c               |   11 +----
 arch/arm/mach-omap2/usb-musb.c                |   11 +----
 arch/arm/plat-omap/i2c.c                      |   10 +---
 arch/arm/plat-omap/include/plat/omap_device.h |    1 +
 arch/arm/plat-omap/omap_device.c              |   55 +++++++++++++++++++-
 15 files changed, 93 insertions(+), 214 deletions(-)

[PATCH v3 1/6] OMAP: omap_device: Add omap_device_get_by_hwmod_name

[Benoit Cousson]

From: Nishanth Menon <nm@ti.com>

An API which translates a standard hwmod name to corresponding
platform_device is useful for drivers when they need to look up the
device associated with a hwmod name to map back into the device
structure pointers. These ideally should be used by drivers in
mach directory. Using a generic hwmod name like "gpu" instead of
the actual device name which could change in the future, allows
us to:
a) Could in effect help replace apis such as omap2_get_mpuss_device,
omap2_get_iva_device, omap2_get_l3_device, omap4_get_dsp_device,
etc..
b) Scale to more devices rather than be restricted to named functions
c) Simplify driver's platform_data from passing additional fields
all doing the same thing with different function pointer names
just for accessing a different device name.

Signed-off-by: Nishanth Menon <nm@ti.com>
[b-cousson at ti.com: Adapt it to the new pdev pointer inside od,
remove the unneeded helpers, and fold the next patch here]
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
---
 arch/arm/plat-omap/include/plat/omap_device.h |    1 +
 arch/arm/plat-omap/omap_device.c              |   36 +++++++++++++++++++++++++
 2 files changed, 37 insertions(+), 0 deletions(-)

diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index d4d9b96..12c5b0c 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -101,6 +101,7 @@ struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
 					 int pm_lats_cnt, int is_early_device);
 
 void __iomem *omap_device_get_rt_va(struct omap_device *od);
+struct device *omap_device_get_by_hwmod_name(const char *oh_name);
 
 /* OMAP PM interface */
 int omap_device_align_pm_lat(struct platform_device *pdev,
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 26aee5c..f832f92 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -844,6 +844,42 @@ void __iomem *omap_device_get_rt_va(struct omap_device *od)
 	return omap_hwmod_get_mpu_rt_va(od->hwmods[0]);
 }
 
+/**
+ * omap_device_get_by_hwmod_name() - convert a hwmod name to
+ * device pointer.
+ * @oh_name: name of the hwmod device
+ *
+ * Returns back a struct device * pointer associated with a hwmod
+ * device represented by a hwmod_name
+ */
+struct device *omap_device_get_by_hwmod_name(const char *oh_name)
+{
+	struct omap_hwmod *oh;
+
+	if (!oh_name) {
+		WARN(1, "%s: no hwmod name!\n", __func__);
+		return ERR_PTR(-EINVAL);
+	}
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (IS_ERR_OR_NULL(oh)) {
+		WARN(1, "%s: no hwmod for %s\n", __func__,
+			oh_name);
+		return ERR_PTR(oh ? PTR_ERR(oh) : -ENODEV);
+	}
+	if (IS_ERR_OR_NULL(oh->od)) {
+		WARN(1, "%s: no omap_device for %s\n", __func__,
+			oh_name);
+		return ERR_PTR(oh->od ? PTR_ERR(oh->od) : -ENODEV);
+	}
+
+	if (IS_ERR_OR_NULL(oh->od->pdev))
+		return ERR_PTR(oh->od->pdev ? PTR_ERR(oh->od->pdev) : -ENODEV);
+
+	return &oh->od->pdev->dev;
+}
+EXPORT_SYMBOL(omap_device_get_by_hwmod_name);
+
 /*
  * Public functions intended for use in omap_device_pm_latency
  * .activate_func and .deactivate_func function pointers
-- 
1.7.0.4

[PATCH v3 2/6] OMAP3: beagle-board: Use the omap_hwmod_name_get_dev API

[Benoit Cousson]

Replace the multiple omap2_get_XXX_device APIs with the new
omap_hwmod_name_get_dev that uses the hwmod name to get the proper
device.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Nishanth Menon <nm@ti.com>
---
 arch/arm/mach-omap2/board-omap3beagle.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 3ae16b4..9815b2b 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -493,8 +493,8 @@ static void __init beagle_opp_init(void)
 	if (cpu_is_omap3630()) {
 		struct device *mpu_dev, *iva_dev;
 
-		mpu_dev = omap2_get_mpuss_device();
-		iva_dev = omap2_get_iva_device();
+		mpu_dev = omap_device_get_by_hwmod_name("mpu");
+		iva_dev = omap_device_get_by_hwmod_name("iva");
 
 		if (!mpu_dev || !iva_dev) {
 			pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
-- 
1.7.0.4

[PATCH v3 3/6] OMAP2+: pm: Use hwmod name instead of dev pointer

[Benoit Cousson]

Replace the struct device parameter of omap2_set_init_voltage
by the hwmod name. It will avoid having to store explicitely
the device pointer into a static variable.
Moreover, it will be a little bit more scalable if we introduce
new DVFS devices.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
---
 arch/arm/mach-omap2/pm.c |   22 +++++++++++++++-------
 1 files changed, 15 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index e7cd794..f852e4f 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -169,18 +169,26 @@ err:
  * in the opp entry
  */
 static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
-						struct device *dev)
+					 const char *oh_name)
 {
 	struct voltagedomain *voltdm;
 	struct clk *clk;
 	struct opp *opp;
 	unsigned long freq, bootup_volt;
+	struct device *dev;
 
-	if (!vdd_name || !clk_name || !dev) {
+	if (!vdd_name || !clk_name || !oh_name) {
 		printk(KERN_ERR "%s: Invalid parameters!\n", __func__);
 		goto exit;
 	}
 
+	dev = omap_device_get_by_hwmod_name(oh_name);
+	if (IS_ERR(dev)) {
+		pr_err("%s: Unable to get dev pointer for hwmod %s\n",
+			__func__, oh_name);
+		goto exit;
+	}
+
 	voltdm = omap_voltage_domain_lookup(vdd_name);
 	if (IS_ERR(voltdm)) {
 		printk(KERN_ERR "%s: Unable to get vdd pointer for vdd_%s\n",
@@ -226,8 +234,8 @@ static void __init omap3_init_voltages(void)
 	if (!cpu_is_omap34xx())
 		return;
 
-	omap2_set_init_voltage("mpu", "dpll1_ck", mpu_dev);
-	omap2_set_init_voltage("core", "l3_ick", l3_dev);
+	omap2_set_init_voltage("mpu", "dpll1_ck", "mpu");
+	omap2_set_init_voltage("core", "l3_ick", "l3_main");
 }
 
 static void __init omap4_init_voltages(void)
@@ -235,9 +243,9 @@ static void __init omap4_init_voltages(void)
 	if (!cpu_is_omap44xx())
 		return;
 
-	omap2_set_init_voltage("mpu", "dpll_mpu_ck", mpu_dev);
-	omap2_set_init_voltage("core", "l3_div_ck", l3_dev);
-	omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", iva_dev);
+	omap2_set_init_voltage("mpu", "dpll_mpu_ck", "mpu");
+	omap2_set_init_voltage("core", "l3_div_ck", "l3_main_1");
+	omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", "iva");
 }
 
 static int __init omap2_common_pm_init(void)
-- 
1.7.0.4

[PATCH v3 4/6] OMAP2+: pm: Remove static devices variable for mpu, dsp, iva and l3 PM

[Benoit Cousson]

Since the device pointer is now retrieved using the hwmod name, remove
the static variables used to store the device pointers for DSP, MPU, IVA
and L3 devices for PM/DVFS usage.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
---
 arch/arm/mach-omap2/pm.c |   47 ++++++---------------------------------------
 1 files changed, 7 insertions(+), 40 deletions(-)

diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index f852e4f..d2ef1c2 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -26,38 +26,7 @@
 
 static struct omap_device_pm_latency *pm_lats;
 
-static struct device *mpu_dev;
-static struct device *iva_dev;
-static struct device *l3_dev;
-static struct device *dsp_dev;
-
-struct device *omap2_get_mpuss_device(void)
-{
-	WARN_ON_ONCE(!mpu_dev);
-	return mpu_dev;
-}
-
-struct device *omap2_get_iva_device(void)
-{
-	WARN_ON_ONCE(!iva_dev);
-	return iva_dev;
-}
-
-struct device *omap2_get_l3_device(void)
-{
-	WARN_ON_ONCE(!l3_dev);
-	return l3_dev;
-}
-
-struct device *omap4_get_dsp_device(void)
-{
-	WARN_ON_ONCE(!dsp_dev);
-	return dsp_dev;
-}
-EXPORT_SYMBOL(omap4_get_dsp_device);
-
-/* static int _init_omap_device(struct omap_hwmod *oh, void *user) */
-static int _init_omap_device(char *name, struct device **new_dev)
+static int _init_omap_device(char *name)
 {
 	struct omap_hwmod *oh;
 	struct platform_device *pdev;
@@ -72,8 +41,6 @@ static int _init_omap_device(char *name, struct device **new_dev)
 		 __func__, name))
 		return -ENODEV;
 
-	*new_dev = &pdev->dev;
-
 	return 0;
 }
 
@@ -82,16 +49,16 @@ static int _init_omap_device(char *name, struct device **new_dev)
  */
 static void omap2_init_processor_devices(void)
 {
-	_init_omap_device("mpu", &mpu_dev);
+	_init_omap_device("mpu");
 	if (omap3_has_iva())
-		_init_omap_device("iva", &iva_dev);
+		_init_omap_device("iva");
 
 	if (cpu_is_omap44xx()) {
-		_init_omap_device("l3_main_1", &l3_dev);
-		_init_omap_device("dsp", &dsp_dev);
-		_init_omap_device("iva", &iva_dev);
+		_init_omap_device("l3_main_1");
+		_init_omap_device("dsp");
+		_init_omap_device("iva");
 	} else {
-		_init_omap_device("l3_main", &l3_dev);
+		_init_omap_device("l3_main");
 	}
 }
 
-- 
1.7.0.4

[PATCH v3 5/6] OMAP: omap_device: Create a default omap_device_pm_latency

[Benoit Cousson]

Most devices are using the same default omap_device_pm_latency structure
during device built. In order to avoid the duplication of the same
structure everywhere, add a default structure that will be used if
the device does not have an explicit one.

Next patches will clean the duplicated structures.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
---
 arch/arm/plat-omap/omap_device.c |   19 ++++++++++++++++++-
 1 files changed, 18 insertions(+), 1 deletions(-)

diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index f832f92..cd8d977 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -97,6 +97,14 @@
 static int omap_device_register(struct platform_device *pdev);
 static int omap_early_device_register(struct platform_device *pdev);
 
+static struct omap_device_pm_latency omap_default_latency[] = {
+	{
+		.deactivate_func = omap_device_idle_hwmods,
+		.activate_func   = omap_device_enable_hwmods,
+		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	}
+};
+
 /* Private functions */
 
 /**
@@ -510,8 +518,17 @@ struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
 	if (ret)
 		goto odbs_exit3;
 
-	od->pm_lats = pm_lats;
+	if (!pm_lats) {
+		pm_lats = omap_default_latency;
+		pm_lats_cnt = ARRAY_SIZE(omap_default_latency);
+	}
+
 	od->pm_lats_cnt = pm_lats_cnt;
+	od->pm_lats = kmemdup(pm_lats,
+			sizeof(struct omap_device_pm_latency) * pm_lats_cnt,
+			GFP_KERNEL);
+	if (!od->pm_lats)
+		goto odbs_exit3;
 
 	for (i = 0; i < oh_cnt; i++) {
 		hwmods[i]->od = od;
-- 
1.7.0.4

[PATCH v3 5/6] OMAP: omap_device: Create a default omap_device_pm_latency

[Tony Lindgren]

* Benoit Cousson <b-cousson@ti.com> [110927 09:45]:
> Most devices are using the same default omap_device_pm_latency structure
> during device built. In order to avoid the duplication of the same
> structure everywhere, add a default structure that will be used if
> the device does not have an explicit one.
> 
> Next patches will clean the duplicated structures.
> 
> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
> Cc: Kevin Hilman <khilman@ti.com>
> Cc: Paul Walmsley <paul@pwsan.com>
> ---
>  arch/arm/plat-omap/omap_device.c |   19 ++++++++++++++++++-
>  1 files changed, 18 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
> index f832f92..cd8d977 100644
> --- a/arch/arm/plat-omap/omap_device.c
> +++ b/arch/arm/plat-omap/omap_device.c
> @@ -97,6 +97,14 @@
>  static int omap_device_register(struct platform_device *pdev);
>  static int omap_early_device_register(struct platform_device *pdev);
>  
> +static struct omap_device_pm_latency omap_default_latency[] = {
> +	{
> +		.deactivate_func = omap_device_idle_hwmods,
> +		.activate_func   = omap_device_enable_hwmods,
> +		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
> +	}
> +};
> +
>  /* Private functions */

Isn't this racey between devices if the latency values get adjusted
automatically for each device?

Tony

[PATCH v3 5/6] OMAP: omap_device: Create a default omap_device_pm_latency

[Kevin Hilman]

Tony Lindgren <tony@atomide.com> writes:

> * Benoit Cousson <b-cousson@ti.com> [110927 09:45]:
>> Most devices are using the same default omap_device_pm_latency structure
>> during device built. In order to avoid the duplication of the same
>> structure everywhere, add a default structure that will be used if
>> the device does not have an explicit one.
>> 
>> Next patches will clean the duplicated structures.
>> 
>> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
>> Cc: Kevin Hilman <khilman@ti.com>
>> Cc: Paul Walmsley <paul@pwsan.com>
>> ---
>>  arch/arm/plat-omap/omap_device.c |   19 ++++++++++++++++++-
>>  1 files changed, 18 insertions(+), 1 deletions(-)
>> 
>> diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
>> index f832f92..cd8d977 100644
>> --- a/arch/arm/plat-omap/omap_device.c
>> +++ b/arch/arm/plat-omap/omap_device.c
>> @@ -97,6 +97,14 @@
>>  static int omap_device_register(struct platform_device *pdev);
>>  static int omap_early_device_register(struct platform_device *pdev);
>>  
>> +static struct omap_device_pm_latency omap_default_latency[] = {
>> +	{
>> +		.deactivate_func = omap_device_idle_hwmods,
>> +		.activate_func   = omap_device_enable_hwmods,
>> +		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
>> +	}
>> +};
>> +
>>  /* Private functions */
>
> Isn't this racey between devices if the latency values get adjusted
> automatically for each device?

A copy of this is made for each device (uses kmemdup later in the patch.)

Kevin

[PATCH v3 5/6] OMAP: omap_device: Create a default omap_device_pm_latency

[Tony Lindgren]

* Kevin Hilman <khilman@ti.com> [110927 10:56]:
> Tony Lindgren <tony@atomide.com> writes:
> 
> > Isn't this racey between devices if the latency values get adjusted
> > automatically for each device?
> 
> A copy of this is made for each device (uses kmemdup later in the patch.)

Oh ok, sorry for the noise.

Tony

[PATCH v3 6/6] OMAP2+: devices: Remove all omap_device_pm_latency structures

[Benoit Cousson]

Remove all these duplicated structures since a default one is now
available.

Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
---
 arch/arm/mach-omap2/devices.c    |   46 +++----------------------------------
 arch/arm/mach-omap2/display.c    |   11 +--------
 arch/arm/mach-omap2/dma.c        |   11 +--------
 arch/arm/mach-omap2/gpio.c       |   12 +---------
 arch/arm/mach-omap2/hsmmc.c      |   18 +--------------
 arch/arm/mach-omap2/hwspinlock.c |   12 +---------
 arch/arm/mach-omap2/mcbsp.c      |   11 +--------
 arch/arm/mach-omap2/serial.c     |   25 +-------------------
 arch/arm/mach-omap2/sr_device.c  |   11 +--------
 arch/arm/mach-omap2/usb-musb.c   |   11 +--------
 arch/arm/plat-omap/i2c.c         |   10 +-------
 11 files changed, 14 insertions(+), 164 deletions(-)

diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 10adf66..2d4a199 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -221,14 +221,6 @@ static inline void omap_init_camera(void)
 #endif
 }
 
-struct omap_device_pm_latency omap_keyboard_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 int __init omap4_keyboard_init(struct omap4_keypad_platform_data
 			*sdp4430_keypad_data, struct omap_board_data *bdata)
 {
@@ -248,9 +240,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
 	keypad_data = sdp4430_keypad_data;
 
 	pdev = omap_device_build(name, id, oh, keypad_data,
-			sizeof(struct omap4_keypad_platform_data),
-			omap_keyboard_latency,
-			ARRAY_SIZE(omap_keyboard_latency), 0);
+			sizeof(struct omap4_keypad_platform_data), NULL, 0, 0);
 
 	if (IS_ERR(pdev)) {
 		WARN(1, "Can't build omap_device for %s:%s.\n",
@@ -263,14 +253,6 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
 }
 
 #if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
-static struct omap_device_pm_latency mbox_latencies[] = {
-	[0] = {
-		.activate_func = omap_device_enable_hwmods,
-		.deactivate_func = omap_device_idle_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static inline void omap_init_mbox(void)
 {
 	struct omap_hwmod *oh;
@@ -282,8 +264,7 @@ static inline void omap_init_mbox(void)
 		return;
 	}
 
-	pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0,
-				mbox_latencies, ARRAY_SIZE(mbox_latencies), 0);
+	pdev = omap_device_build("omap-mailbox", -1, oh, NULL, 0, NULL, 0, 0);
 	WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n",
 						__func__, PTR_ERR(pdev));
 }
@@ -334,14 +315,6 @@ static inline void omap_init_audio(void) {}
 
 #include <plat/mcspi.h>
 
-struct omap_device_pm_latency omap_mcspi_latency[] = {
-	[0] = {
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
 {
 	struct platform_device *pdev;
@@ -372,8 +345,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
 
 	spi_num++;
 	pdev = omap_device_build(name, spi_num, oh, pdata,
-				sizeof(*pdata),	omap_mcspi_latency,
-				ARRAY_SIZE(omap_mcspi_latency), 0);
+				sizeof(*pdata),	NULL, 0, 0);
 	WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s\n",
 				name, oh->name);
 	kfree(pdata);
@@ -698,14 +670,6 @@ static int __init omap2_init_devices(void)
 arch_initcall(omap2_init_devices);
 
 #if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
-static struct omap_device_pm_latency omap_wdt_latency[] = {
-	[0] = {
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static int __init omap_init_wdt(void)
 {
 	int id = -1;
@@ -723,9 +687,7 @@ static int __init omap_init_wdt(void)
 		return -EINVAL;
 	}
 
-	pdev = omap_device_build(dev_name, id, oh, NULL, 0,
-				omap_wdt_latency,
-				ARRAY_SIZE(omap_wdt_latency), 0);
+	pdev = omap_device_build(dev_name, id, oh, NULL, 0, NULL, 0, 0);
 	WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n",
 				dev_name, oh->name);
 	return 0;
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 18693f6..8ad0a2f 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -35,14 +35,6 @@ static struct platform_device omap_display_device = {
 	},
 };
 
-static struct omap_device_pm_latency omap_dss_latency[] = {
-	[0] = {
-		.deactivate_func        = omap_device_idle_hwmods,
-		.activate_func          = omap_device_enable_hwmods,
-		.flags			= OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 struct omap_dss_hwmod_data {
 	const char *oh_name;
 	const char *dev_name;
@@ -111,8 +103,7 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
 		pdev = omap_device_build(curr_dss_hwmod[i].dev_name,
 				curr_dss_hwmod[i].id, oh, &pdata,
 				sizeof(struct omap_display_platform_data),
-				omap_dss_latency,
-				ARRAY_SIZE(omap_dss_latency), 0);
+				NULL, 0, 0);
 
 		if (WARN((IS_ERR(pdev)), "Could not build omap_device for %s\n",
 				curr_dss_hwmod[i].oh_name))
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index ae8cb3f..a59a45a 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -87,14 +87,6 @@ static u16 reg_map[] = {
 	[CCDN]			= 0xd8,
 };
 
-static struct omap_device_pm_latency omap2_dma_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func	 = omap_device_enable_hwmods,
-		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static void __iomem *dma_base;
 static inline void dma_write(u32 val, int reg, int lch)
 {
@@ -258,8 +250,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
 
 	p->errata		= configure_dma_errata();
 
-	pdev = omap_device_build(name, 0, oh, p, sizeof(*p),
-			omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0);
+	pdev = omap_device_build(name, 0, oh, p, sizeof(*p), NULL, 0, 0);
 	kfree(p);
 	if (IS_ERR(pdev)) {
 		pr_err("%s: Can't build omap_device for %s:%s.\n",
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 652ccc5..8cbfbc2 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -24,14 +24,6 @@
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 
-static struct omap_device_pm_latency omap_gpio_latency[] = {
-	[0] = {
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 {
 	struct platform_device *pdev;
@@ -108,9 +100,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 	}
 
 	pdev = omap_device_build(name, id - 1, oh, pdata,
-				sizeof(*pdata),	omap_gpio_latency,
-				ARRAY_SIZE(omap_gpio_latency),
-				false);
+				sizeof(*pdata),	NULL, 0, false);
 	kfree(pdata);
 
 	if (IS_ERR(pdev)) {
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index cc87919..fe16da4 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -413,31 +413,17 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	return 0;
 }
 
-static struct omap_device_pm_latency omap_hsmmc_latency[] = {
-	[0] = {
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func	 = omap_device_enable_hwmods,
-		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-	/*
-	 * XXX There should also be an entry here to power off/on the
-	 * MMC regulators/PBIAS cells, etc.
-	 */
-};
-
 #define MAX_OMAP_MMC_HWMOD_NAME_LEN		16
 
 void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
 {
 	struct omap_hwmod *oh;
 	struct platform_device *pdev;
-	struct omap_device_pm_latency *ohl;
 	char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
 	struct omap_mmc_platform_data *mmc_data;
 	struct omap_mmc_dev_attr *mmc_dev_attr;
 	char *name;
 	int l;
-	int ohl_cnt = 0;
 
 	mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
 	if (!mmc_data) {
@@ -452,8 +438,6 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
 	omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
 
 	name = "omap_hsmmc";
-	ohl = omap_hsmmc_latency;
-	ohl_cnt = ARRAY_SIZE(omap_hsmmc_latency);
 
 	l = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
 		     "mmc%d", ctrl_nr);
@@ -472,7 +456,7 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
 	}
 
 	pdev = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
-		sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false);
+		sizeof(struct omap_mmc_platform_data), NULL, 0, false);
 	if (IS_ERR(pdev)) {
 		WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name);
 		kfree(mmc_data->slots[0].name);
diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c
index 0b3ae9d..36e2109 100644
--- a/arch/arm/mach-omap2/hwspinlock.c
+++ b/arch/arm/mach-omap2/hwspinlock.c
@@ -23,14 +23,6 @@
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 
-struct omap_device_pm_latency omap_spinlock_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	}
-};
-
 int __init hwspinlocks_init(void)
 {
 	int retval = 0;
@@ -48,9 +40,7 @@ int __init hwspinlocks_init(void)
 	if (oh == NULL)
 		return -EINVAL;
 
-	pdev = omap_device_build(dev_name, 0, oh, NULL, 0,
-				omap_spinlock_latency,
-				ARRAY_SIZE(omap_spinlock_latency), false);
+	pdev = omap_device_build(dev_name, 0, oh, NULL, 0, NULL, 0, false);
 	if (IS_ERR(pdev)) {
 		pr_err("Can't build omap_device for %s:%s\n", dev_name,
 								oh_name);
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 7a42f32..9fb5d7d 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -102,14 +102,6 @@ int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id)
 }
 EXPORT_SYMBOL(omap2_mcbsp_set_clks_src);
 
-struct omap_device_pm_latency omap2_mcbsp_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func   = omap_device_enable_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 {
 	int id, count = 1;
@@ -145,8 +137,7 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 		count++;
 	}
 	pdev = omap_device_build_ss(name, id, oh_device, count, pdata,
-				sizeof(*pdata), omap2_mcbsp_latency,
-				ARRAY_SIZE(omap2_mcbsp_latency), false);
+				sizeof(*pdata), NULL, 0, false);
 	kfree(pdata);
 	if (IS_ERR(pdev))  {
 		pr_err("%s: Can't build omap_device for %s:%s.\n", __func__,
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 3d1c1d3..9992dbf 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -107,28 +107,6 @@ struct omap_uart_state {
 static LIST_HEAD(uart_list);
 static u8 num_uarts;
 
-static int uart_idle_hwmod(struct omap_device *od)
-{
-	omap_hwmod_idle(od->hwmods[0]);
-
-	return 0;
-}
-
-static int uart_enable_hwmod(struct omap_device *od)
-{
-	omap_hwmod_enable(od->hwmods[0]);
-
-	return 0;
-}
-
-static struct omap_device_pm_latency omap_uart_latency[] = {
-	{
-		.deactivate_func = uart_idle_hwmod,
-		.activate_func	 = uart_enable_hwmod,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static inline unsigned int __serial_read_reg(struct uart_port *up,
 					     int offset)
 {
@@ -800,8 +778,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
 		return;
 
 	pdev = omap_device_build(name, uart->num, oh, pdata, pdata_size,
-			       omap_uart_latency,
-			       ARRAY_SIZE(omap_uart_latency), false);
+				 NULL, 0, false);
 	WARN(IS_ERR(pdev), "Could not build omap_device for %s: %s.\n",
 	     name, oh->name);
 
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index 624264d..3b5cf50 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -31,14 +31,6 @@
 
 static bool sr_enable_on_init;
 
-static struct omap_device_pm_latency omap_sr_latency[] = {
-	{
-		.deactivate_func = omap_device_idle_hwmods,
-		.activate_func	 = omap_device_enable_hwmods,
-		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST
-	},
-};
-
 /* Read EFUSE values from control registers for OMAP3430 */
 static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 				struct omap_sr_data *sr_data)
@@ -121,8 +113,7 @@ static int sr_dev_init(struct omap_hwmod *oh, void *user)
 	sr_data->enable_on_init = sr_enable_on_init;
 
 	pdev = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data),
-			       omap_sr_latency,
-			       ARRAY_SIZE(omap_sr_latency), 0);
+				 NULL, 0, 0);
 	if (IS_ERR(pdev))
 		pr_warning("%s: Could not build omap_device for %s: %s.\n\n",
 			__func__, name, oh->name);
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index a65145b..c13ff3f 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -60,14 +60,6 @@ static struct musb_hdrc_platform_data musb_plat = {
 
 static u64 musb_dmamask = DMA_BIT_MASK(32);
 
-static struct omap_device_pm_latency omap_musb_latency[] = {
-	{
-		.deactivate_func	= omap_device_idle_hwmods,
-		.activate_func		= omap_device_enable_hwmods,
-		.flags			= OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static void usb_musb_mux_init(struct omap_musb_board_data *board_data)
 {
 	switch (board_data->interface_type) {
@@ -155,8 +147,7 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
 	}
 
 	od = omap_device_build(name, bus_id, oh, &musb_plat,
-			       sizeof(musb_plat), omap_musb_latency,
-			       ARRAY_SIZE(omap_musb_latency), false);
+			       sizeof(musb_plat), NULL, 0, false);
 	if (IS_ERR(od)) {
 		pr_err("Could not build omap_device for %s %s\n",
 						name, oh_name);
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 0c7caf2..c20beb8 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -123,14 +123,6 @@ static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
 	omap_pm_set_max_mpu_wakeup_lat(dev, t);
 }
 
-static struct omap_device_pm_latency omap_i2c_latency[] = {
-	[0] = {
-		.deactivate_func	= omap_device_idle_hwmods,
-		.activate_func		= omap_device_enable_hwmods,
-		.flags			= OMAP_DEVICE_LATENCY_AUTO_ADJUST,
-	},
-};
-
 static inline int omap2_i2c_add_bus(int bus_id)
 {
 	int l;
@@ -162,7 +154,7 @@ static inline int omap2_i2c_add_bus(int bus_id)
 		pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
 	pdev = omap_device_build(name, bus_id, oh, pdata,
 			sizeof(struct omap_i2c_bus_platform_data),
-			omap_i2c_latency, ARRAY_SIZE(omap_i2c_latency), 0);
+			NULL, 0, 0);
 	WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name);
 
 	return PTR_ERR(pdev);
-- 
1.7.0.4

[PATCH v3 0/6] OMAP: omap_device cleanup before device-tree integration

[Kevin Hilman]

Benoit Cousson <b-cousson@ti.com> writes:

> Hi Kevin,
>
> Here are a couple of cleanups on top of your for_3.2/omap_device branch.
>
> patches are available here:
> git://gitorious.org/omap-pm/linux.git for_3.2/1_omap_device_cleanup

Thanks, this series looks good now.  Queuing for v3.2 here:

   git://github.com/khilman/linux-omap-pm.git for_3.2/omap_device-2

Kevin