[PATCH V9 0/5] imx53 ahci driver v9

[PATCH V9 0/5] imx53 ahci driver v9

[Richard Zhu]

*** BLURB HERE ***
This is the seventh iteration of the imx53 ahci patch. Changes between
v5 and v7 are described in the following description.

ChangeLog v5->v6:
 - Move the most ahci initialization codes from the board related files
   to the common ahci_sata file.

 - Add the imx53 ahci's own ata_port_info definition in ahci_platform
   driver, since the 'ahci_pmp_retry_srst_ops' is required when imx53
   ahci is present.
 V6: http://www.spinics.net/lists/arm-kernel/msg138254.html

ChangeLog v6->v7:
 - Define the default imx53 ahci platform data, reduce the modificatons
   on the board related files.

 - Handle the sata_pwr_en pin obviously on smd board.
 V7: http://www.spinics.net/lists/arm-kernel/msg138569.html

ChangeLog V7->V8
 - Accept Sascha's suggestions.
   * Rename sata_init/sata_exit to imx_sata_init/imx_sata_exit.
   * move the init/exit as static functions to platform-ahci-imx.c file.
     Make a wrapper on these functions, and avoid to pass the function
     hooks by platform data.
   V8: http://www.spinics.net/lists/arm-kernel/msg141500.html

ChangeLog V8->V9
 - Use gpio_request_one to replace the gpio_request and gpio_direction_output
   when enable the sata power on mx53 smd board.

Richard Zhu (5):
  AHCI Add the AHCI SATA feature on the MX53 platforms
  ahci_plt Add the board_ids and pi refer to different features
  MX53 Enable the AHCI SATA on MX53 ARD board
  MX53 Enable the AHCI SATA on MX53 LOCO board
  MX53 Enable the AHCI SATA on MX53 SMD board

 arch/arm/mach-mx5/board-mx53_ard.c              |    1 +
 arch/arm/mach-mx5/board-mx53_loco.c             |    1 +
 arch/arm/mach-mx5/board-mx53_smd.c              |   16 +++
 arch/arm/mach-mx5/clock-mx51-mx53.c             |   19 +++
 arch/arm/mach-mx5/devices-imx53.h               |    2 +
 arch/arm/plat-mxc/devices/Kconfig               |    4 +
 arch/arm/plat-mxc/devices/Makefile              |    1 +
 arch/arm/plat-mxc/devices/platform-ahci-imx.c   |  156 +++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/devices-common.h |   10 ++
 drivers/ata/ahci_platform.c                     |   44 ++++++-
 10 files changed, 248 insertions(+), 6 deletions(-)
 create mode 100644 arch/arm/plat-mxc/devices/platform-ahci-imx.c

[PATCH V9 1/5] AHCI Add the AHCI SATA feature on the MX53 platforms

[Richard Zhu]

Signed-off-by: Richard Zhu <richard.zhu@linaro.org>
Tested-by: Hector Oron Martinez <hector.oron@gmail.com>
---
 arch/arm/mach-mx5/clock-mx51-mx53.c             |   19 +++
 arch/arm/mach-mx5/devices-imx53.h               |    2 +
 arch/arm/plat-mxc/devices/Kconfig               |    4 +
 arch/arm/plat-mxc/devices/Makefile              |    1 +
 arch/arm/plat-mxc/devices/platform-ahci-imx.c   |  156 +++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/devices-common.h |   10 ++
 6 files changed, 192 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/plat-mxc/devices/platform-ahci-imx.c

diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 7f20308..e1fadaf 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1397,6 +1397,22 @@ static struct clk esdhc4_mx53_clk = {
 	.secondary = &esdhc4_ipg_clk,
 };
 
+static struct clk sata_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_max_enable,
+	.enable_reg = MXC_CCM_CCGR4,
+	.enable_shift = MXC_CCM_CCGRx_CG1_OFFSET,
+	.disable = _clk_max_disable,
+};
+
+static struct clk ahci_phy_clk = {
+	.parent = &usb_phy1_clk,
+};
+
+static struct clk ahci_dma_clk = {
+	.parent = &ahb_clk,
+};
+
 DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
 DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
 DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
@@ -1503,6 +1519,9 @@ static struct clk_lookup mx53_lookups[] = {
 	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
 	_REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
+	_REGISTER_CLOCK("imx53-ahci.0", "ahci", sata_clk)
+	_REGISTER_CLOCK("imx53-ahci.0", "ahci_phy", ahci_phy_clk)
+	_REGISTER_CLOCK("imx53-ahci.0", "ahci_dma", ahci_dma_clk)
 };
 
 static void clk_tree_init(void)
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
index c27fe8b..1ab399e 100644
--- a/arch/arm/mach-mx5/devices-imx53.h
+++ b/arch/arm/mach-mx5/devices-imx53.h
@@ -40,3 +40,5 @@ extern const struct imx_imx_ssi_data imx53_imx_ssi_data[];
 extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
 #define imx53_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx53_imx_keypad_data, pdata)
+
+extern struct platform_device *__init imx53_add_ahci_imx(void);
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index bd294ad..f63887b 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -76,3 +76,7 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 
 config IMX_HAVE_PLATFORM_SPI_IMX
 	bool
+
+config IMX_HAVE_PLATFORM_AHCI
+	bool
+	default y if ARCH_MX53
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
index b41bf97..e858ad9 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -25,3 +25,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) +=  platform-spi_imx.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) +=  platform-ahci-imx.o
diff --git a/arch/arm/plat-mxc/devices/platform-ahci-imx.c b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
new file mode 100644
index 0000000..d8a56ae
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-ahci-imx.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_ahci_imx_data_entry_single(soc, _devid)		\
+	{								\
+		.devid = _devid,					\
+		.iobase = soc ## _SATA_BASE_ADDR,			\
+		.irq = soc ## _INT_SATA,				\
+	}
+
+#ifdef CONFIG_SOC_IMX53
+const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst =
+	imx_ahci_imx_data_entry_single(MX53, "imx53-ahci");
+#endif
+
+enum {
+	HOST_CAP = 0x00,
+	HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
+	HOST_PORTS_IMPL	= 0x0c,
+	HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
+};
+
+static struct clk *sata_clk, *sata_ref_clk;
+
+/* AHCI module Initialization, if return 0, initialization is successful. */
+static int imx_sata_init(struct device *dev, void __iomem *addr)
+{
+	u32 tmpdata;
+	int ret = 0;
+	struct clk *clk;
+
+	sata_clk = clk_get(dev, "ahci");
+	if (IS_ERR(sata_clk)) {
+		dev_err(dev, "no sata clock.\n");
+		return PTR_ERR(sata_clk);
+	}
+	ret = clk_enable(sata_clk);
+	if (ret) {
+		dev_err(dev, "can't enable sata clock.\n");
+		goto put_sata_clk;
+	}
+
+	/* Get the AHCI SATA PHY CLK */
+	sata_ref_clk = clk_get(dev, "ahci_phy");
+	if (IS_ERR(sata_ref_clk)) {
+		dev_err(dev, "no sata ref clock.\n");
+		ret = PTR_ERR(sata_ref_clk);
+		goto release_sata_clk;
+	}
+	ret = clk_enable(sata_ref_clk);
+	if (ret) {
+		dev_err(dev, "can't enable sata ref clock.\n");
+		goto put_sata_ref_clk;
+	}
+
+	/* Get the AHB clock rate, and configure the TIMER1MS reg later */
+	clk = clk_get(dev, "ahci_dma");
+	if (IS_ERR(clk)) {
+		dev_err(dev, "no dma clock.\n");
+		ret = PTR_ERR(clk);
+		goto release_sata_ref_clk;
+	}
+	tmpdata = clk_get_rate(clk) / 1000;
+	clk_put(clk);
+
+	writel(tmpdata, addr + HOST_TIMER1MS);
+
+	tmpdata = readl(addr + HOST_CAP);
+	if (!(tmpdata & HOST_CAP_SSS)) {
+		tmpdata |= HOST_CAP_SSS;
+		writel(tmpdata, addr + HOST_CAP);
+	}
+
+	if (!(readl(addr + HOST_PORTS_IMPL) & 0x1))
+		writel((readl(addr + HOST_PORTS_IMPL) | 0x1),
+			addr + HOST_PORTS_IMPL);
+
+	return 0;
+
+release_sata_ref_clk:
+	clk_disable(sata_ref_clk);
+put_sata_ref_clk:
+	clk_put(sata_ref_clk);
+release_sata_clk:
+	clk_disable(sata_clk);
+put_sata_clk:
+	clk_put(sata_clk);
+
+	return ret;
+}
+
+static void imx_sata_exit(struct device *dev)
+{
+	clk_disable(sata_ref_clk);
+	clk_put(sata_ref_clk);
+
+	clk_disable(sata_clk);
+	clk_put(sata_clk);
+
+}
+struct platform_device *__init imx_add_ahci_imx(
+		const struct imx_ahci_imx_data *data,
+		const struct ahci_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_4K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device_dmamask(data->devid, 0,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata),  DMA_BIT_MASK(32));
+}
+
+struct platform_device *__init imx53_add_ahci_imx(void)
+{
+	struct ahci_platform_data pdata = {
+		.init = imx_sata_init,
+		.exit = imx_sata_exit,
+	};
+
+	return imx_add_ahci_imx(&imx53_ahci_imx_data, &pdata);
+}
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index 524538a..f04e063 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -301,3 +301,13 @@ struct platform_device *__init imx_add_spi_imx(
 struct platform_device *imx_add_imx_dma(void);
 struct platform_device *imx_add_imx_sdma(char *name,
 	resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
+
+#include <linux/ahci_platform.h>
+struct imx_ahci_imx_data {
+	const char *devid;
+	resource_size_t iobase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_ahci_imx(
+		const struct imx_ahci_imx_data *data,
+		const struct ahci_platform_data *pdata);
-- 
1.7.1

[PATCH V9 2/5] ahci_plt Add the board_ids and pi refer to different features

[Richard Zhu]

On imx53 AHCI, soft reset fails with IPMS set when PMP
is enabled but SATA HDD/ODD is connected to SATA port,
do soft reset again to port 0.
So the 'ahci_pmp_retry_srst_ops' is required when imx53
ahci is present.

Signed-off-by: Richard Zhu <richard.zhu@linaro.org>
Acked-by: Eric Miao <eric.miao@linaro.org>
---
 drivers/ata/ahci_platform.c |   44 +++++++++++++++++++++++++++++++++++++-----
 1 files changed, 38 insertions(+), 6 deletions(-)

diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 6fef1fa..c03277d 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -23,6 +23,41 @@
 #include <linux/ahci_platform.h>
 #include "ahci.h"
 
+enum ahci_type {
+	AHCI,		/* standard platform ahci */
+	IMX53_AHCI,	/* ahci on i.mx53 */
+};
+
+static struct platform_device_id ahci_devtype[] = {
+	{
+		.name = "ahci",
+		.driver_data = AHCI,
+	}, {
+		.name = "imx53-ahci",
+		.driver_data = IMX53_AHCI,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, ahci_devtype);
+
+
+static const struct ata_port_info ahci_port_info[] = {
+	/* by features */
+	[AHCI] = {
+		.flags		= AHCI_FLAG_COMMON,
+		.pio_mask	= ATA_PIO4,
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &ahci_ops,
+	},
+	[IMX53_AHCI] = {
+		.flags		= AHCI_FLAG_COMMON,
+		.pio_mask	= ATA_PIO4,
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &ahci_pmp_retry_srst_ops,
+	},
+};
+
 static struct scsi_host_template ahci_platform_sht = {
 	AHCI_SHT("ahci_platform"),
 };
@@ -31,12 +66,8 @@ static int __init ahci_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct ahci_platform_data *pdata = dev->platform_data;
-	struct ata_port_info pi = {
-		.flags		= AHCI_FLAG_COMMON,
-		.pio_mask	= ATA_PIO4,
-		.udma_mask	= ATA_UDMA6,
-		.port_ops	= &ahci_ops,
-	};
+	const struct platform_device_id *id = platform_get_device_id(pdev);
+	struct ata_port_info pi = ahci_port_info[id->driver_data];
 	const struct ata_port_info *ppi[] = { &pi, NULL };
 	struct ahci_host_priv *hpriv;
 	struct ata_host *host;
@@ -177,6 +208,7 @@ static struct platform_driver ahci_driver = {
 		.name = "ahci",
 		.owner = THIS_MODULE,
 	},
+	.id_table	= ahci_devtype,
 };
 
 static int __init ahci_init(void)
-- 
1.7.1

[PATCH V9 3/5] MX53 Enable the AHCI SATA on MX53 ARD board

[Richard Zhu]

Signed-off-by: Richard Zhu <richard.zhu@linaro.org>
---
 arch/arm/mach-mx5/board-mx53_ard.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c
index 76a67c4..ef2039e 100644
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ b/arch/arm/mach-mx5/board-mx53_ard.c
@@ -234,6 +234,7 @@ static void __init mx53_ard_board_init(void)
 	imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
 	imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
 	imx_add_gpio_keys(&ard_button_data);
+	imx53_add_ahci_imx();
 }
 
 static void __init mx53_ard_timer_init(void)
-- 
1.7.1

[PATCH V9 4/5] MX53 Enable the AHCI SATA on MX53 LOCO board

[Richard Zhu]

Signed-off-by: Richard Zhu <richard.zhu@linaro.org>
---
 arch/arm/mach-mx5/board-mx53_loco.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 4e1d51d..940aac9 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -273,6 +273,7 @@ static void __init mx53_loco_board_init(void)
 	imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
 	imx_add_gpio_keys(&loco_button_data);
 	gpio_led_register_device(-1, &mx53loco_leds_data);
+	imx53_add_ahci_imx();
 }
 
 static void __init mx53_loco_timer_init(void)
-- 
1.7.1

[PATCH V9 5/5] MX53 Enable the AHCI SATA on MX53 SMD board

[Richard Zhu]

Signed-off-by: Richard Zhu <richard.zhu@linaro.org>
---
 arch/arm/mach-mx5/board-mx53_smd.c |   16 ++++++++++++++++
 1 files changed, 16 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index bc02894..efcab68 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -35,6 +35,7 @@
 #include "devices-imx53.h"
 
 #define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
+#define MX53_SMD_SATA_PWR_EN    IMX_GPIO_NR(3, 3)
 
 static iomux_v3_cfg_t mx53_smd_pads[] = {
 	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
@@ -111,6 +112,19 @@ static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
 	.bitrate = 100000,
 };
 
+static inline void mx53_smd_ahci_pwr_on(void)
+{
+	int ret;
+
+	/* Enable SATA PWR */
+	ret = gpio_request_one(MX53_SMD_SATA_PWR_EN,
+			GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr");
+	if (ret) {
+		pr_err("failed to enable SATA_PWR_EN: %d\n", ret);
+		return;
+	}
+}
+
 static void __init mx53_smd_board_init(void)
 {
 	imx53_soc_init();
@@ -125,6 +139,8 @@ static void __init mx53_smd_board_init(void)
 	imx53_add_sdhci_esdhc_imx(0, NULL);
 	imx53_add_sdhci_esdhc_imx(1, NULL);
 	imx53_add_sdhci_esdhc_imx(2, NULL);
+	mx53_smd_ahci_pwr_on();
+	imx53_add_ahci_imx();
 }
 
 static void __init mx53_smd_timer_init(void)
-- 
1.7.1

[PATCH V9 2/5] ahci_plt Add the board_ids and pi refer to different features

[Jeff Garzik]

On 09/28/2011 03:41 AM, Richard Zhu wrote:
> On imx53 AHCI, soft reset fails with IPMS set when PMP
> is enabled but SATA HDD/ODD is connected to SATA port,
> do soft reset again to port 0.
> So the 'ahci_pmp_retry_srst_ops' is required when imx53
> ahci is present.
>
> Signed-off-by: Richard Zhu<richard.zhu@linaro.org>
> Acked-by: Eric Miao<eric.miao@linaro.org>
> ---
>   drivers/ata/ahci_platform.c |   44 +++++++++++++++++++++++++++++++++++++-----
>   1 files changed, 38 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
> index 6fef1fa..c03277d 100644
> --- a/drivers/ata/ahci_platform.c
> +++ b/drivers/ata/ahci_platform.c
> @@ -23,6 +23,41 @@
>   #include<linux/ahci_platform.h>
>   #include "ahci.h"
>
> +enum ahci_type {
> +	AHCI,		/* standard platform ahci */
> +	IMX53_AHCI,	/* ahci on i.mx53 */
> +};
> +
> +static struct platform_device_id ahci_devtype[] = {
> +	{
> +		.name = "ahci",
> +		.driver_data = AHCI,
> +	}, {
> +		.name = "imx53-ahci",
> +		.driver_data = IMX53_AHCI,
> +	}, {
> +		/* sentinel */
> +	}
> +};
> +MODULE_DEVICE_TABLE(platform, ahci_devtype);
> +
> +
> +static const struct ata_port_info ahci_port_info[] = {
> +	/* by features */
> +	[AHCI] = {
> +		.flags		= AHCI_FLAG_COMMON,
> +		.pio_mask	= ATA_PIO4,
> +		.udma_mask	= ATA_UDMA6,
> +		.port_ops	=&ahci_ops,
> +	},
> +	[IMX53_AHCI] = {
> +		.flags		= AHCI_FLAG_COMMON,
> +		.pio_mask	= ATA_PIO4,
> +		.udma_mask	= ATA_UDMA6,
> +		.port_ops	=&ahci_pmp_retry_srst_ops,
> +	},
> +};
> +
>   static struct scsi_host_template ahci_platform_sht = {
>   	AHCI_SHT("ahci_platform"),
>   };
> @@ -31,12 +66,8 @@ static int __init ahci_probe(struct platform_device *pdev)
>   {
>   	struct device *dev =&pdev->dev;
>   	struct ahci_platform_data *pdata = dev->platform_data;
> -	struct ata_port_info pi = {
> -		.flags		= AHCI_FLAG_COMMON,
> -		.pio_mask	= ATA_PIO4,
> -		.udma_mask	= ATA_UDMA6,
> -		.port_ops	=&ahci_ops,
> -	};
> +	const struct platform_device_id *id = platform_get_device_id(pdev);
> +	struct ata_port_info pi = ahci_port_info[id->driver_data];
>   	const struct ata_port_info *ppi[] = {&pi, NULL };
>   	struct ahci_host_priv *hpriv;
>   	struct ata_host *host;
> @@ -177,6 +208,7 @@ static struct platform_driver ahci_driver = {
>   		.name = "ahci",
>   		.owner = THIS_MODULE,
>   	},
> +	.id_table	= ahci_devtype,
>   };

Looks good...  I queued this one.

	Jeff

[PATCH V9 2/5] ahci_plt Add the board_ids and pi refer to different features

[Sascha Hauer]

On Thu, Oct 06, 2011 at 02:22:01AM -0400, Jeff Garzik wrote:
> 
> Looks good...  I queued this one.

Ok, I'll take care for the rest of this series.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |