From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/6] arm/imx: remove cpu_is_xxx() check from __imx_ioremap()
Date: Wed, 28 Sep 2011 17:16:07 +0800 [thread overview]
Message-ID: <1317201368-6403-6-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1317201368-6403-1-git-send-email-shawn.guo@linaro.org>
This patch adds an ioremap hook imx_ioremap to be called in
__imx_ioremap(). Any soc that needs a customized ioremap other
than __arm_ioremap() can set up this hook in soc specific call.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-imx/mm-imx3.c | 19 +++++++++++++++++++
arch/arm/plat-mxc/include/mach/io.h | 22 ++++++----------------
arch/arm/plat-mxc/system.c | 1 +
3 files changed, 26 insertions(+), 16 deletions(-)
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 6fad0d6..9f0e82e 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -58,6 +58,23 @@ static void imx3_idle(void)
: "=r" (reg));
}
+static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
+ unsigned int mtype)
+{
+ if (mtype == MT_DEVICE) {
+ /*
+ * Access all peripherals below 0x80000000 as nonshared device
+ * on mx3, but leave l2cc alone. Otherwise cache corruptions
+ * can occur.
+ */
+ if (phys_addr < 0x80000000 &&
+ !addr_in_module(phys_addr, MX3x_L2CC))
+ mtype = MT_DEVICE_NONSHARED;
+ }
+
+ return __arm_ioremap(phys_addr, size, mtype);
+}
+
void imx3_init_l2x0(void)
{
void __iomem *l2x0_base;
@@ -127,6 +144,7 @@ void __init imx31_init_early(void)
mxc_set_cpu_type(MXC_CPU_MX31);
mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
imx_idle = imx3_idle;
+ imx_ioremap = imx3_ioremap;
}
void __init imx35_init_early(void)
@@ -135,6 +153,7 @@ void __init imx35_init_early(void)
mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
imx_idle = imx3_idle;
+ imx_ioremap = imx3_ioremap;
}
void __init mx31_init_irq(void)
diff --git a/arch/arm/plat-mxc/include/mach/io.h b/arch/arm/plat-mxc/include/mach/io.h
index 4347a87..338300b 100644
--- a/arch/arm/plat-mxc/include/mach/io.h
+++ b/arch/arm/plat-mxc/include/mach/io.h
@@ -14,32 +14,22 @@
/* Allow IO space to be anywhere in the memory */
#define IO_SPACE_LIMIT 0xffffffff
-#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35)
-#include <mach/hardware.h>
-
#define __arch_ioremap __imx_ioremap
#define __arch_iounmap __iounmap
#define addr_in_module(addr, mod) \
((unsigned long)(addr) - mod ## _BASE_ADDR < mod ## _SIZE)
+extern void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int);
+
static inline void __iomem *
__imx_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
{
- if (mtype == MT_DEVICE && (cpu_is_mx31() || cpu_is_mx35())) {
- /*
- * Access all peripherals below 0x80000000 as nonshared device
- * on mx3, but leave l2cc alone. Otherwise cache corruptions
- * can occur.
- */
- if (phys_addr < 0x80000000 &&
- !addr_in_module(phys_addr, MX3x_L2CC))
- mtype = MT_DEVICE_NONSHARED;
- }
-
- return __arm_ioremap(phys_addr, size, mtype);
+ if (imx_ioremap != NULL)
+ return imx_ioremap(phys_addr, size, mtype);
+ else
+ return __arm_ioremap(phys_addr, size, mtype);
}
-#endif
/* io address mapping macro */
#define __io(a) __typesafe_io(a)
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 5fa03e7..9dad8dc 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -29,6 +29,7 @@
#include <asm/mach-types.h>
void (*imx_idle)(void) = NULL;
+void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL;
static void __iomem *wdog_base;
--
1.7.4.1
next prev parent reply other threads:[~2011-09-28 9:16 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-28 9:16 [PATCH 0/6] Support single zImage for imx3 and imx6 Shawn Guo
2011-09-28 9:16 ` [PATCH 1/6] arm/imx: merge mm-imx35.c into mm-imx31.c Shawn Guo
2011-09-28 9:16 ` [PATCH 2/6] arm/imx: rename mm-imx31.c to mm-imx3.c Shawn Guo
2011-09-28 9:16 ` [PATCH 3/6] arm/imx: change mxc_init_l2x0() to an imx31/35 specific call Shawn Guo
2011-09-28 9:16 ` [PATCH 4/6] arm/imx: remove cpu_is_xxx() from arch_idle() Shawn Guo
2011-09-29 8:59 ` Sascha Hauer
2011-09-29 14:22 ` Shawn Guo
2011-09-28 9:16 ` Shawn Guo [this message]
2011-09-28 9:16 ` [PATCH 6/6] arm/imx: merge i.MX3 and i.MX6 Shawn Guo
2011-09-28 12:18 ` Sascha Hauer
2011-09-29 5:17 ` Shawn Guo
2011-09-29 8:35 ` Sascha Hauer
2011-09-28 12:20 ` [PATCH 0/6] Support single zImage for imx3 and imx6 Sascha Hauer
2011-09-29 5:19 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1317201368-6403-6-git-send-email-shawn.guo@linaro.org \
--to=shawn.guo@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).