From: zoss@devai.org (Zoltan Devai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/9] ARM: SPMP8000: Add pwm driver
Date: Sun, 9 Oct 2011 18:36:09 +0200 [thread overview]
Message-ID: <1318178172-7965-7-git-send-email-zoss@devai.org> (raw)
In-Reply-To: <1318178172-7965-1-git-send-email-zoss@devai.org>
Signed-off-by: Zoltan Devai <zoss@devai.org>
---
arch/arm/mach-spmp8000/pwm.c | 246 ++++++++++++++++++++++++++++++++++++++++++
1 files changed, 246 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-spmp8000/pwm.c
diff --git a/arch/arm/mach-spmp8000/pwm.c b/arch/arm/mach-spmp8000/pwm.c
new file mode 100644
index 0000000..a6418bf
--- /dev/null
+++ b/arch/arm/mach-spmp8000/pwm.c
@@ -0,0 +1,246 @@
+/*
+ * SPMP8000 machines PWM support
+ *
+ * Copyright (C) 2011 Zoltan Devai <zoss@devai.org>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <asm/div64.h>
+
+#include <mach/regs-timer.h>
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device {
+ const char *label;
+ void __iomem *regbase;
+ unsigned int use_count;
+ unsigned int pwm_id;
+ unsigned long clkrate;
+ struct device *dev;
+ struct list_head node;
+};
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+ unsigned long long c;
+ unsigned long period_cycles, duty_cycles, prescale;
+
+ if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
+ return -EINVAL;
+
+ c = pwm->clkrate;
+ c = c * period_ns;
+ do_div(c, 1000000000);
+ period_cycles = c;
+
+ prescale = (period_cycles - 1) / 65536;
+
+ if (prescale > 65535)
+ return -EINVAL;
+
+ if (prescale < 1)
+ prescale = 1;
+
+ period_cycles /= prescale;
+
+ if (period_cycles > 65536)
+ return -EINVAL;
+
+ c = (unsigned long long)period_cycles * duty_ns;
+ do_div(c, period_ns);
+ duty_cycles = c;
+
+ dev_dbg(pwm->dev, "period_ns: %d, duty_ns: %d, prescale: %ld,"
+ " period: %ld, duty: %ld\n",
+ period_ns, duty_ns, prescale, period_cycles,
+ duty_cycles);
+
+ writel(prescale - 1, pwm->regbase + SPMP8000_TMRB_PSR);
+ writel(period_cycles, pwm->regbase + SPMP8000_TMRB_LDR);
+ writel(duty_cycles, pwm->regbase + SPMP8000_TMRB_CMP);
+
+ return 0;
+}
+EXPORT_SYMBOL(pwm_config);
+
+int pwm_enable(struct pwm_device *pwm)
+{
+ writel(SPMP8000_TMRB_CTR_TE | SPMP8000_TMRB_CTR_OE |
+ SPMP8000_TMRB_CTR_PWMON | SPMP8000_TMRB_CTR_UD |
+ (1 << SPMP8000_TMRB_CTR_M_SH),
+ pwm->regbase + SPMP8000_TMRB_CTR);
+ return 0;
+}
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+ writel(0, pwm->regbase + SPMP8000_TMRB_CTR);
+}
+EXPORT_SYMBOL(pwm_disable);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+ struct pwm_device *pwm;
+ int found = 0;
+
+ mutex_lock(&pwm_lock);
+
+ list_for_each_entry(pwm, &pwm_list, node) {
+ if (pwm->pwm_id == pwm_id) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found) {
+ if (pwm->use_count == 0) {
+ pwm->use_count++;
+ pwm->label = label;
+ } else {
+ pwm = ERR_PTR(-EBUSY);
+ }
+ } else {
+ pwm = ERR_PTR(-ENOENT);
+ }
+
+ mutex_unlock(&pwm_lock);
+ return pwm;
+}
+EXPORT_SYMBOL(pwm_request);
+
+void pwm_free(struct pwm_device *pwm)
+{
+ mutex_lock(&pwm_lock);
+
+ if (pwm->use_count) {
+ pwm->use_count--;
+ pwm->label = NULL;
+ } else {
+ pr_warning("PWM device already freed\n");
+ }
+
+ mutex_unlock(&pwm_lock);
+}
+EXPORT_SYMBOL(pwm_free);
+
+static inline void __add_pwm(struct pwm_device *pwm)
+{
+ mutex_lock(&pwm_lock);
+ list_add_tail(&pwm->node, &pwm_list);
+ mutex_unlock(&pwm_lock);
+}
+
+static int __devinit pwm_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ const unsigned int *id;
+ struct pwm_device *pwm;
+ void __iomem *base;
+ struct clk *clk;
+
+ id = of_get_property(np, "id", NULL);
+ if (!id) {
+ dev_dbg(&pdev->dev, "No id specified\n");
+ return -ENODEV;
+ }
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ dev_dbg(&pdev->dev, "Can't map registers");
+ return -ENOMEM;
+ }
+
+ clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_dbg(&pdev->dev, "Unable to get pwm device clock");
+ return -ENODEV;
+ }
+
+ pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+ if (pwm == NULL) {
+ dev_dbg(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ pwm->dev = &pdev->dev;
+ pwm->use_count = 0;
+ pwm->pwm_id = *id;
+ pwm->regbase = base;
+ pwm->clkrate = clk_get_rate(clk);
+
+ dev_dbg(&pdev->dev, "register pwm.%d, regbase %p, clkrate: %ld\n",
+ pwm->pwm_id, pwm->regbase, pwm->clkrate);
+
+ dev_info(&pdev->dev, "pwm %d registered\n", pwm->pwm_id);
+
+ __add_pwm(pwm);
+
+ platform_set_drvdata(pdev, pwm);
+ return 0;
+}
+
+static int __devexit pwm_remove(struct platform_device *pdev)
+{
+ struct pwm_device *pwm;
+
+ pwm = platform_get_drvdata(pdev);
+ if (pwm == NULL)
+ return -ENODEV;
+
+ mutex_lock(&pwm_lock);
+ list_del(&pwm->node);
+ mutex_unlock(&pwm_lock);
+
+ kfree(pwm);
+ return 0;
+}
+
+static const __devinitconst struct of_device_id spmp8000_pwm_match[] = {
+ {
+ .compatible = "sunplus,spmp8000-pwm",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, spmp8000_pwm_match);
+
+static struct platform_driver pwm_driver = {
+ .driver = {
+ .name = "spmp8000-pwm",
+ .owner = THIS_MODULE,
+ .of_match_table = spmp8000_pwm_match,
+ },
+ .probe = pwm_probe,
+ .remove = __devexit_p(pwm_remove),
+};
+
+static int __init pwm_init(void)
+{
+ return platform_driver_register(&pwm_driver);
+}
+arch_initcall(pwm_init);
+
+static void __exit pwm_exit(void)
+{
+ platform_driver_unregister(&pwm_driver);
+}
+module_exit(pwm_exit);
+
+MODULE_AUTHOR("Zoltan Devai <zoss@devai.org>");
+MODULE_LICENSE("GPL");
--
1.7.4.1
next prev parent reply other threads:[~2011-10-09 16:36 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-09 16:36 Add support for the SPMP8000 SoC and Letcool board Zoltan Devai
2011-10-09 16:36 ` [PATCH 1/9] ARM: vic: Don't write to the read-only register VIC_IRQ_STATUS Zoltan Devai
2011-10-10 1:35 ` Linus Walleij
2011-10-10 13:59 ` Zoltan Devai
2011-10-09 16:36 ` [PATCH 2/9] ARM: SPMP8000: Add machine base files Zoltan Devai
2011-10-09 17:22 ` Jamie Iles
2011-10-10 11:36 ` Zoltan Devai
2011-10-10 11:52 ` Jamie Iles
2011-10-11 14:44 ` Arnd Bergmann
2011-10-16 14:10 ` Zoltan Devai
2011-10-16 15:57 ` Russell King - ARM Linux
2011-10-16 20:59 ` Arnd Bergmann
2011-10-16 20:52 ` Jean-Christophe PLAGNIOL-VILLARD
2011-10-17 11:44 ` Arnd Bergmann
2011-10-09 16:36 ` [PATCH 3/9] ARM: SPMP8000: Add clk support Zoltan Devai
2011-10-13 9:38 ` Russell King - ARM Linux
2011-10-16 14:16 ` Zoltan Devai
2011-10-17 12:15 ` Mark Brown
2011-10-18 10:18 ` Russell King - ARM Linux
2011-10-09 16:36 ` [PATCH 4/9] ARM: SPMP8000: Add ADC driver Zoltan Devai
2011-10-10 1:29 ` Linus Walleij
2011-10-10 9:42 ` Jonathan Cameron
2011-10-10 9:46 ` Jonathan Cameron
2011-10-10 10:00 ` Mark Brown
2011-10-10 11:42 ` Zoltan Devai
2011-10-10 11:44 ` Mark Brown
2011-10-11 14:17 ` Arnd Bergmann
2011-10-11 14:40 ` Mark Brown
2011-10-11 15:24 ` Arnd Bergmann
2011-10-11 15:39 ` Jonathan Cameron
2011-10-12 14:42 ` Mark Brown
2011-10-12 15:41 ` Jonathan Cameron
2011-10-13 9:47 ` Russell King - ARM Linux
2011-10-13 11:09 ` Linus Walleij
2011-10-13 11:35 ` Jonathan Cameron
2011-10-13 11:35 ` Mark Brown
2011-10-13 12:17 ` Russell King - ARM Linux
2011-10-13 14:19 ` Arnd Bergmann
2011-10-13 14:27 ` Mark Brown
2011-10-13 14:38 ` Mark Brown
2011-10-13 14:56 ` Arnd Bergmann
2011-10-13 16:25 ` Mark Brown
2011-10-09 16:36 ` [PATCH 5/9] ARM: SPMP8000: Add pinmux driver Zoltan Devai
2011-10-10 1:32 ` Linus Walleij
2011-10-10 8:01 ` Barry Song
2011-10-10 8:34 ` Linus Walleij
2011-10-09 16:36 ` Zoltan Devai [this message]
2011-10-10 1:50 ` [PATCH 6/9] ARM: SPMP8000: Add pwm driver Linus Walleij
2011-10-10 9:30 ` Sascha Hauer
2011-10-09 16:36 ` [PATCH 7/9] ARM: SPMP8000: Add dts file of SPMP8000 SoC and Letcool board Zoltan Devai
2011-10-10 8:54 ` Jamie Iles
2011-10-09 16:36 ` [PATCH 8/9] ARM: SPMP8000: Add support for the " Zoltan Devai
2011-10-11 14:09 ` Arnd Bergmann
2011-10-11 14:43 ` Zoltan Devai
2011-10-11 15:18 ` Arnd Bergmann
2011-10-13 9:54 ` Russell King - ARM Linux
2011-10-09 16:36 ` [PATCH 9/9] ARM: SPMP8000: Add Kconfig and Makefile entries to build the machine Zoltan Devai
2011-10-09 17:25 ` Jamie Iles
2011-10-10 1:43 ` Linus Walleij
2011-10-13 9:53 ` Russell King - ARM Linux
2011-10-10 8:55 ` Add support for the SPMP8000 SoC and Letcool board Jamie Iles
2011-10-10 12:00 ` Zoltan Devai
2011-10-10 12:03 ` Jamie Iles
2011-10-11 14:57 ` Arnd Bergmann
[not found] ` <1319040118-29773-1-git-send-email-zoss@devai.org>
2011-10-19 16:01 ` [PATCH v2 1/5] ARM: SPMP8000: Add machine base files Zoltan Devai
2011-10-19 19:15 ` Arnd Bergmann
2011-10-21 22:54 ` Russell King - ARM Linux
2011-10-23 21:47 ` Zoltan Devai
2011-10-23 21:37 ` Zoltan Devai
2011-10-24 9:13 ` Arnd Bergmann
2011-10-24 11:00 ` Jamie Iles
2011-11-02 13:29 ` Zoltan Devai
2011-11-03 15:08 ` Arnd Bergmann
2011-10-19 16:01 ` [PATCH v2 2/5] ARM: SPMP8000: Add clk support Zoltan Devai
2011-10-19 16:01 ` [PATCH v2 3/5] ARM: SPMP8000: Add clocksource and clockevent drivers Zoltan Devai
2011-10-19 16:01 ` [PATCH v2 4/5] ARM: SPMP8000: Add SPMP8000 SoC and Letcool board dts descriptions Zoltan Devai
2011-10-24 12:47 ` Rob Herring
2011-10-19 16:01 ` [PATCH v2 5/5] ARM: SPMP8000: Add Kconfig and Makefile entries Zoltan Devai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1318178172-7965-7-git-send-email-zoss@devai.org \
--to=zoss@devai.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).