From: rnayak@ti.com (Rajendra Nayak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/5] regulator: twl: Remove hardcoded board constraints from driver
Date: Mon, 10 Oct 2011 21:49:34 +0530 [thread overview]
Message-ID: <1318263578-7407-2-git-send-email-rnayak@ti.com> (raw)
In-Reply-To: <1318263578-7407-1-git-send-email-rnayak@ti.com>
Remove the hardcoded .valid_modes_mask and .valid_ops_mask for
each regulator from the twl driver and let the boards pass it.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/regulator/twl-regulator.c | 8 --------
1 files changed, 0 insertions(+), 8 deletions(-)
diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index ee8747f..f696287 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -1027,14 +1027,6 @@ static int __devinit twlreg_probe(struct platform_device *pdev)
/* copy the features into regulator data */
info->features = (unsigned long)initdata->driver_data;
- /* Constrain board-specific capabilities according to what
- * this driver and the chip itself can actually do.
- */
- c = &initdata->constraints;
- c->valid_modes_mask &= REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY;
- c->valid_ops_mask &= REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS;
switch (pdev->id) {
case TWL4030_REG_VIO:
case TWL4030_REG_VDD1:
--
1.7.1
next prev parent reply other threads:[~2011-10-10 16:19 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-10 16:19 [PATCH v2 0/5] Device tree support for regulators Rajendra Nayak
2011-10-10 16:19 ` Rajendra Nayak [this message]
2011-10-10 16:25 ` [PATCH v2 1/5] regulator: twl: Remove hardcoded board constraints from driver Mark Brown
2011-10-10 16:34 ` Rajendra Nayak
2011-10-10 16:19 ` [PATCH v2 2/5] dt: add empty dt helpers for non-dt build Rajendra Nayak
2011-10-13 18:32 ` Grant Likely
2011-10-10 16:19 ` [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data Rajendra Nayak
2011-10-10 17:22 ` Mark Brown
2011-10-11 5:59 ` Rajendra Nayak
2011-10-13 18:38 ` Grant Likely
2011-10-13 22:12 ` Mark Brown
2011-10-13 18:40 ` Grant Likely
2011-10-16 14:55 ` Shawn Guo
2011-10-17 4:17 ` Rajendra Nayak
2011-10-18 11:58 ` Shawn Guo
2011-10-18 16:00 ` Mark Brown
2011-10-19 5:33 ` Shawn Guo
2011-10-19 14:47 ` Mark Brown
2011-10-19 15:04 ` Shawn Guo
2011-10-19 15:10 ` Mark Brown
2011-10-20 3:42 ` Rajendra Nayak
2011-10-20 9:41 ` Mark Brown
2011-10-20 12:10 ` Rajendra Nayak
2011-10-20 16:27 ` Tony Lindgren
2011-10-20 16:40 ` Mark Brown
2011-10-20 17:05 ` Tony Lindgren
2011-10-20 17:22 ` Tony Lindgren
2011-10-20 19:57 ` Mark Brown
2011-10-20 20:10 ` Tony Lindgren
2011-10-20 21:42 ` Mark Brown
2011-10-20 22:09 ` Tony Lindgren
2011-10-24 9:07 ` Grant Likely
2011-10-20 19:56 ` Mark Brown
2011-10-18 13:20 ` Shawn Guo
2011-10-19 11:35 ` Rajendra Nayak
2011-10-19 14:42 ` Shawn Guo
2011-10-19 14:50 ` Mark Brown
2011-10-20 5:18 ` Rajendra Nayak
2011-10-20 6:14 ` Shawn Guo
2011-10-20 12:09 ` Rajendra Nayak
2011-10-21 8:23 ` Shawn Guo
2011-10-21 8:41 ` Rajendra Nayak
2011-10-21 11:58 ` Shawn Guo
2011-10-24 6:02 ` Rajendra Nayak
2011-10-24 7:34 ` Mark Brown
2011-10-24 8:17 ` Grant Likely
2011-10-24 8:53 ` Rajendra Nayak
2011-10-24 9:19 ` Mark Brown
2011-10-24 10:05 ` Rajendra Nayak
2011-10-24 9:23 ` Shawn Guo
2011-10-24 9:02 ` Shawn Guo
2011-10-24 8:56 ` Rajendra Nayak
2011-10-24 9:11 ` Shawn Guo
2011-10-24 9:13 ` Rajendra Nayak
2011-10-24 13:47 ` Shawn Guo
2011-10-25 6:00 ` Rajendra Nayak
2011-10-25 6:26 ` Rajendra Nayak
2011-10-25 6:52 ` Shawn Guo
2011-10-25 6:56 ` Rajendra Nayak
2011-10-25 7:20 ` Shawn Guo
2011-10-25 7:13 ` Rajendra Nayak
2011-10-25 7:42 ` Shawn Guo
2011-10-24 11:35 ` Grant Likely
2011-10-24 9:24 ` Grant Likely
2011-10-24 9:39 ` Mark Brown
2011-10-24 13:04 ` Shawn Guo
2011-10-24 13:06 ` Mark Brown
2011-10-24 13:40 ` Shawn Guo
2011-10-24 13:49 ` Mark Brown
2011-10-24 14:47 ` Shawn Guo
2011-10-25 7:11 ` Mark Brown
2011-10-24 13:59 ` Grant Likely
2011-10-24 14:51 ` Shawn Guo
2011-10-24 14:56 ` Grant Likely
2011-10-24 15:51 ` Shawn Guo
2011-10-24 22:21 ` Grant Likely
2011-10-25 6:10 ` Rajendra Nayak
2011-10-25 7:08 ` Shawn Guo
2011-10-25 7:01 ` Rajendra Nayak
2011-10-25 7:28 ` Shawn Guo
2011-10-10 16:19 ` [PATCH v2 4/5] regulator: adapt fixed regulator driver to dt Rajendra Nayak
2011-10-13 18:43 ` Grant Likely
2011-10-10 16:19 ` [PATCH v2 5/5] regulator: map consumer regulator based on device tree Rajendra Nayak
2011-10-10 17:35 ` Mark Brown
2011-10-11 5:49 ` Rajendra Nayak
2011-10-11 7:08 ` Nayak, Rajendra
2011-10-13 16:52 ` Mark Brown
2011-10-13 18:46 ` Grant Likely
2011-10-18 13:33 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1318263578-7407-2-git-send-email-rnayak@ti.com \
--to=rnayak@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).