From mboxrd@z Thu Jan 1 00:00:00 1970 From: shawn.guo@linaro.org (Shawn Guo) Date: Mon, 17 Oct 2011 14:15:06 +0800 Subject: [PATCH 1/5] arm/imx: remove mx31_setup_weimcs() from mx31.h In-Reply-To: <1318832110-29289-1-git-send-email-shawn.guo@linaro.org> References: <1318832110-29289-1-git-send-email-shawn.guo@linaro.org> Message-ID: <1318832110-29289-2-git-send-email-shawn.guo@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The helper function mx31_setup_weimcs() references IOMEM() and IMX_IO_P2V() but without required header mach/hardware.h included in mx31.h. This will break the build of those mx31 based board file with no direct inclusion of mach/hardware.h, or when indirect inclusion to mach/hardware.h breaks. For example, when the inclusion of mach/hardware.h gets removed from mach/gpio.h, we will see the following compile error. CC arch/arm/mach-imx/mach-pcm037_eet.o In file included from arch/arm/mach-imx/devices-imx31.h:9:0, from arch/arm/mach-imx/mach-pcm037_eet.c:20: arch/arm/plat-mxc/include/mach/mx31.h: In function ?mx31_setup_weimcs?: arch/arm/plat-mxc/include/mach/mx31.h:129:2: error: implicit declaration of function ?IOMEM? arch/arm/plat-mxc/include/mach/mx31.h:129:2: error: implicit declaration of function ?IMX_IO_P2V? This patch removes mx31_setup_weimcs() from mx31.h and makes it local to mach-qong.c, which is the only user for this helper. Signed-off-by: Shawn Guo --- arch/arm/mach-imx/mach-qong.c | 5 ++++- arch/arm/plat-mxc/include/mach/mx31.h | 14 -------------- 2 files changed, 4 insertions(+), 15 deletions(-) diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 1c4822b..4ff5faf 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -190,7 +190,10 @@ static struct platform_device qong_nand_device = { static void __init qong_init_nand_mtd(void) { /* init CS */ - mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800); + __raw_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3))); + __raw_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3))); + __raw_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3))); + mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true); /* enable pin */ diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h index 79e7fc0..e27619e 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/plat-mxc/include/mach/mx31.h @@ -1,10 +1,6 @@ #ifndef __MACH_MX31_H__ #define __MACH_MX31_H__ -#ifndef __ASSEMBLER__ -#include -#endif - /* * IRAM */ @@ -122,16 +118,6 @@ #define MX31_IO_P2V(x) IMX_IO_P2V(x) #define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x)) -#ifndef __ASSEMBLER__ -static inline void mx31_setup_weimcs(size_t cs, - unsigned upper, unsigned lower, unsigned addional) -{ - __raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs))); - __raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs))); - __raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs))); -} -#endif - #define MX31_INT_I2C3 3 #define MX31_INT_I2C2 4 #define MX31_INT_MPEG4_ENCODER 5 -- 1.7.4.1