From: davidb@codeaurora.org (David Brown)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 33/34] ARM: msm: fix names of UART clocks
Date: Wed, 2 Nov 2011 11:36:30 -0700 [thread overview]
Message-ID: <1320258991-22325-34-git-send-email-davidb@codeaurora.org> (raw)
In-Reply-To: <1320258991-22325-1-git-send-email-davidb@codeaurora.org>
Earlier code for MSM uarts had three separate drivers, one for the old
"legacy" hardware, one for the new DMA-based hardware, and a third
that used the DMA-based hardware in a legacy-compatible mode.
The current msm_serial driver handles both the older hardware and the
DMA-based hardware in non-DMA mode from the same driver. Rename the
clocks for this device to support this usage.
Signed-off-by: David Brown <davidb@codeaurora.org>
---
arch/arm/mach-msm/clock-8x60.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-msm/clock-8x60.c b/arch/arm/mach-msm/clock-8x60.c
index 21c2472..f398bd7 100644
--- a/arch/arm/mach-msm/clock-8x60.c
+++ b/arch/arm/mach-msm/clock-8x60.c
@@ -3378,7 +3378,7 @@ static struct clk_lookup msm_clocks_8x60[] = {
CLK_LOOKUP("gsbi_uart_clk", gsbi9_uart_clk.c, "msm_serial_hsl.1"),
CLK_LOOKUP("gsbi_uart_clk", gsbi10_uart_clk.c, NULL),
CLK_LOOKUP("gsbi_uart_clk", gsbi11_uart_clk.c, NULL),
- CLK_LOOKUP("gsbi_uart_clk", gsbi12_uart_clk.c, "msm_serial_hsl.0"),
+ CLK_LOOKUP("gsbi_uart_clk", gsbi12_uart_clk.c, "msm_serial.0"),
CLK_LOOKUP("spi_clk", gsbi1_qup_clk.c, "spi_qsd.0"),
CLK_LOOKUP("gsbi_qup_clk", gsbi2_qup_clk.c, NULL),
CLK_LOOKUP("gsbi_qup_clk", gsbi3_qup_clk.c, "qup_i2c.0"),
@@ -3425,7 +3425,7 @@ static struct clk_lookup msm_clocks_8x60[] = {
CLK_LOOKUP("spi_pclk", gsbi10_p_clk.c, "spi_qsd.1"),
CLK_LOOKUP("gsbi_pclk", gsbi11_p_clk.c, NULL),
CLK_LOOKUP("gsbi_pclk", gsbi12_p_clk.c, "msm_dsps.0"),
- CLK_LOOKUP("gsbi_pclk", gsbi12_p_clk.c, "msm_serial_hsl.0"),
+ CLK_LOOKUP("gsbi_pclk", gsbi12_p_clk.c, "msm_serial.0"),
CLK_LOOKUP("gsbi_pclk", gsbi12_p_clk.c, "qup_i2c.5"),
CLK_LOOKUP("ppss_pclk", ppss_p_clk.c, NULL),
CLK_LOOKUP("tsif_pclk", tsif_p_clk.c, NULL),
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
next prev parent reply other threads:[~2011-11-02 18:36 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-02 18:35 [RFC PATCH 00/34] msm: msm8660 and msm8960 clock support David Brown
2011-11-02 18:35 ` [RFC PATCH 01/34] msm: clock-pcom: Mark functions static David Brown
2011-11-02 18:35 ` [RFC PATCH 02/34] msm: clock: Always use an array to iterate over clocks David Brown
2011-11-02 19:45 ` Russell King - ARM Linux
2011-11-02 21:34 ` Stephen Boyd
2011-11-02 18:36 ` [RFC PATCH 03/34] msm: clock: Pass struct clk to the clk_ops David Brown
2011-11-02 18:36 ` [RFC PATCH 04/34] msm: clock: Support one lock per clock David Brown
2011-11-02 18:36 ` [RFC PATCH 05/34] msm: clock-pcom: Introduce a struct pcom_clk David Brown
2011-11-02 18:36 ` [RFC PATCH 06/34] msm: clock: Support clk_[s|g]et_parent() clk_ops David Brown
2011-11-02 18:36 ` [RFC PATCH 07/34] msm: clock-debug: Use clk_enable()/clk_disable() directly David Brown
2011-11-02 18:36 ` [RFC PATCH 08/34] msm: clock: Enable/disable parent clocks generically David Brown
2011-11-02 18:36 ` [RFC PATCH 09/34] msm: clock: Implement rate voting David Brown
2011-11-02 18:36 ` [RFC PATCH 10/34] msm: clock-pcom: Add pbus specific clock ops David Brown
2011-11-02 18:36 ` [RFC PATCH 11/34] msm: Migrate to clock rate voting David Brown
2011-11-02 18:36 ` [RFC PATCH 12/34] msm: clock: Make most clk_*() operations optional David Brown
2011-11-02 18:36 ` [RFC PATCH 13/34] msm: clock-debug: Implement a default is_enabled() David Brown
2011-11-02 18:36 ` [RFC PATCH 14/34] msm: proc_comm: Add CLKCTL_RPC_SRC_REQUEST David Brown
2011-11-02 18:36 ` [RFC PATCH 15/34] msm: clock: Add local clock control framework David Brown
2011-11-02 18:36 ` [RFC PATCH 16/34] msm: clock-pcom: Expose pc_clk_reset David Brown
2011-11-02 18:36 ` [RFC PATCH 17/34] msm: clock: Add 7x30 local clock support David Brown
2011-11-02 18:36 ` [RFC PATCH 18/34] msm: clock-local: Add support for 8x60 clock types David Brown
2011-11-02 18:36 ` [RFC PATCH 20/34] msm: clock: Add list_rate debugfs nodes for locally-controlled clocks David Brown
2011-11-02 18:36 ` [RFC PATCH 21/34] msm: clock: Add debugfs interface to measure clock rates David Brown
2011-11-02 18:36 ` [RFC PATCH 22/34] msm: clock-8x60: Support measurement of CPU and L2 clocks David Brown
2011-11-02 18:36 ` [RFC PATCH 23/34] msm: Unify iomap for clock regions David Brown
2011-11-02 18:36 ` [RFC PATCH 24/34] msm: clock: Support dummy clocks David Brown
2011-11-02 18:36 ` [RFC PATCH 26/34] msm: 8660: Add FLUID support David Brown
2011-11-02 18:36 ` [RFC PATCH 27/34] msm-8x60: Add serial support David Brown
2011-11-02 18:36 ` [RFC PATCH 28/34] msm: clock: Invert CLKFLAG_AUTO_OFF David Brown
2011-11-02 18:36 ` [RFC PATCH 29/34] msm: clock: Expand CLK_MIN, CLK_MAX and CLK_MINMAX macros David Brown
2011-11-02 18:36 ` [RFC PATCH 30/34] msm: clock: Add EBI1 voter clocks for ADM on SoCs without them David Brown
2011-11-02 18:36 ` [RFC PATCH 31/34] msm: clock: Remove msm_clk_soc_init() David Brown
2011-11-02 18:36 ` [RFC PATCH 32/34] msm: clock-8x60: Add local control of vpe_axi_clk and vpe_axi_clk David Brown
2011-11-02 18:36 ` David Brown [this message]
2011-11-02 18:36 ` [RFC PATCH 34/34] msm_serial: fix clock rate on DMA-based uarts David Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1320258991-22325-34-git-send-email-davidb@codeaurora.org \
--to=davidb@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).